The Exhibitors' HandbookDownloadable Resources
User Manual for MODify models including: GN-K-03 Gondola Display Pros, GN-K-03, Gondola Display Pros, Display Pros
MODify Gondola Kit 03 – Showtastic
Downloadable Resources
File Info : application/pdf, 14 Pages, 8.28MB
DocumentDocumentMODify Gondola Kit 03 MODifyTM is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease. MODify Gondola Kit 03 features three frames (center, side, and header) that all include SEG push-fit printed graphics. With its rolling base, this display is versatile and can be placed almost anywhere. Enhance and MODify by incorporating optional shelves or hang bars to showcase merchandise. features and benefits: Base Kit includes: - Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver - Heavy-duty aluminum frame, steel base - Steel, slotted uprights - Three frames: side, center, one header - Center section holds 35.5"W x 57"H SEG push-fit fabric graphic, one on each side - End cap includes a 37"w x 57"H SEG push-fit fabric graphic and black liner on inside - Rolling base (casters included) - Display is easy to assemble and install - Lifetime hardware warranty against manufacturer defects Optional Accessories Include: - Towel bars. - Faceout bars - U bars - Shelves dimensions: Hardware Assembled unit: 39"W x 61.5"H x 37.5"D 990.6mm(w) x 1562.1mm(h) x 952.5mm(d) Approximate Weight: 87 lbs / 39.4625 kg Graphics Graphic material: Dye-sublimated fabric See graphic templates for graphic sizes. Shipping Packing case(s): 1 Box Shipping dimensions: (62"L x 14"H x 24"D) 1574.8mm(l) x 355.6mm(h) x 609.6mm(d) Approximate shipping weight: 145 lbs / 65.7709 kg additional information: Powder coat color options: We are continually improving and modifying our product range and reserve the right to vary the specifi cations without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications 6/1/2023 Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/ downloads/download-graphic-templates or click here Wood laminate color options: MODify Accessories All Accessories available in white, black, or silver Slotwall Accessories MFY-SLT-HK 4", 6", 8", 10" & 12" MFY-SLT-FC 6", 8", 10" & 12" U-Bar Accessories MFY-SLT-WTR-16-7 MFY-TWL-FC 6", 8" & 10" MFY-UBR-FC 6", 8" & 10" MFY-CSTR-4-PK Shelf and Hanger Bars MFY-36-12-SHELF MFY-SLF-36-12-HB MFY-SLT-TWL-36-3 MFY-UBR-36-12 MFY-DB-36-17 Tools Required MULTI HEX KEY (INCLUDED) PHILLIPS SCREW DRIVER (NOT INCLUDED) 9/16" SOCKET WRENCH (NOT INCLUDED) How to Apply & Remove Graphics Installation and removal of SEG graphics is easy! Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile. Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves. Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter. Graphics Storage & Care Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage. QTY IMAGE DESCRIPTION 2 3/8-16 x 2.5-3"L bolt 1435MM (56.50in) OF 832 DOUBLE SIDED UPRIGHT 1 OPEN EXTRUSION 1 1435MM (56.50in) OF 833 ) RIGHT UPRIGHT 2.5" Caster, no brake and 5/16" threaded post x 2 1.4" length 1 947MM (37.28IN) RIGHT SUPPORT LEG 2.5" Caster, with brake and 5/16" threaded post 2 x 1.4" length. 1 947MM (37.28IN) LEFT SUPPORT LEG MFY-BOLT-375-16-2.5 SETUP INSTRUCTIONS LEFT UPRIGHT RIGHT UPRIGHT STEP 1 BOLT LEFT UPRIGHT TO FOOT STEP 2 BOLT RIGHT UPRIGHT TO FOOT 1 QTY IMAGE DESCRIPTION 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION 2 -WITH CAM LOCKS BOTH ENDS 1 7MM SEG PLASTIC END CAP FOR 833 EXTRUSION 1 7MM SEG PLASTIC END CAP FOR 832 EXTRUSION 180 IMPORTANT! MAKE A HALF TURN TO LOCK EXTRUSIONS SETUP INSTRUCTIONS STEP 4 LOCK CROSS BRACE TO UPRIGHTS AND PLACE END CAPS HOLE HOLE LOOSEN END CAP TO ATTACH TOP CROSS BRACE CROSS BRACE SITS ON SUPPORT LEGS CROSS BRACE STEP 3 LOCK CROSS BRACE TO UPRIGHTS NOTE: BOTTOM CROSS BRACE SITS ON TOP INSIDE EDGE OF LEFT AND RIGHT SUPPORT LEG 2 QTY IMAGE DESCRIPTION (39.26 w X 60.59 h total size ) 35.26 w X 56.59 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone 2 beading around perimeter & pull tab in bottom right corner (WITH 1/4" NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) PRESS GRAPHIC INTO CORNERS THEN PRESS ALONG THE PERIMETER EDGE SETUP INSTRUCTIONS STEP 5 INSTALL GRAPHICS 3 QTY IMAGE DESCRIPTION (94413.M01Mw(3X76.103.5in2)hLEtNotGaTl HsizOeF) W37M.0F1CwD XEX5T6R.5U2SIhON 1 f4in5isDhEsGizReE, EUnMpITrEinRteCdU5ToBzO. BTHlacENk DSoSftWKInTHit, SsIeDwEn 1 wBRitAhCsiKlicETone beading around perimeter & pull t9a4b3MinMbo(3t7to.1m3inri)gLhEtNcGorTnHeOr F WMFCD EXTRUSION 1 45 DEGREE MITER CUT BOTH ENDS 1439MM (56.65in) LENGTH OF WMFCD EXTRUSION 2 45 DEGREE MITER CUT BOTH ENDS 4 SINGLE VECTOR CORNER CLEAT STEP 6 ASSEMBLE FRAME CORNER CLEAT SETUP INSTRUCTIONS INSIDE GRAPHICS 4 QTY IMAGE DESCRIPTION (41.01 w X 60.52 h total size ) 37.01 w X 56.52 h finish size, Unprinted 5oz. Black Soft Knit, sewn 1 with silicone beading around perimeter & pull tab in bottom right corner STEP 7 INSTALL INSIDE GRAPHICS SETUP INSTRUCTIONS INSIDE GRAPHICS 5 QTY IMAGE 1 SIDE BRACKET DESCRIPTION 4 MFY-BOLT-8-32-0.75 (41.01 w X 60.52 h total size ) 37.01 w X 56.52 h finish size, Dye-sub print on Eclipse Blockout 1 Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner STEP 9 INSTALL OUTSIDE GRAPHIC STEP 8 *FASTEN SCREWS TO PLATE SETUP INSTRUCTIONS INSIDE GRAPHICS THEN PRESS ALONG THE PERIMETER EDGE "L" BRACKET PLACE FRAME WITH "L" BRACKET ON GROOVE(FOOT) 6 QTY 2 IMAGE DESCRIPTION 883MM (34.76in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER CUT BOTH ENDS 4 SINGLE VECTOR CORNER CLEAT 305MM (12.01in) LENGTH OF WMFCD EXTRUSION 2 45 DEGREE MITER CUT BOTH ENDS 2 1/4"-20 x 13"L bolt X2 SETUP INSTRUCTIONS STEP 11 ASSEMBLE FRAME & BOLT TO TOP OF THE CROSS BRACE CORNER CLEAT STEP 10 ASSEMBLE TOP FRAME 7 QTY IMAGE DESCRIPTION (38.65 w X 15.88 h total size ) 34.65 w X 11.88 h finish size, Dye-sub print on Eclipse Blockout 2 Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner 2 36in WIDE X 17.25in DEEP - DROP-IN BASE PAN SETUP INSTRUCTIONS STEP 12 ADD TOPPER GRAPHICS PRESS GRAPHIC INTO CORNERS THEN PRESS ALONG THE PERIMETER EDGE STEP 13 PLACE BASE PAN IN GROOVE(FOOT) 8 Kit Hardware BOM ITEM COMPONENTS 306-305-15-15 306-883-15-15 306-943-15-15 306-943-15-15 306-1439-15-15 824-947 824-947 832-1435 832-EC 833-1435 833-EC 835-883-01-01 MFY-BOLT-.25-20-1 MFY-BOLT-8-32-0.75 MFY-BOLT-375-16-2.5 MFY-CSTR-L MFY-CSTR-NL MFY-DB-36-17 SIDE BRACRET VF-CC QTY 2 2 1 1 2 1 1 1 1 1 1 2 2 4 2 2 2 2 1 8 DESCRIPTION 305MM (12.01in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER CUT BOTH ENDS 883MM (34.76in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER CUT BOTH ENDS 943MM (37.13in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER CUT BOTH ENDS 943MM (37.13in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER CUT BOTH ENDS WITH SIDE BRACKET 1439MM (56.65in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER CUT BOTH ENDS 947MM (37.28IN) RIGHT SUPPORT LEG 947MM (37.28IN) LEFT SUPPORT LEG 1435MM (56.50in) OF 832 DOUBLE SIDED UPRIGHT OPEN EXTRUSION 7MM SEG PLASTIC END CAP FOR 832 EXTRUSION 1435MM (56.50in) OF 833 ) RIGHT UPRIGHT 7MM SEG PLASTIC END CAP FOR 833 EXTRUSION 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS 1/4"-20 x 13"L bolt MFY-BOLT-8-32-0.75 3/8-16 x 2.5-3"L bolt 2.5" Caster, with brake and 5/16" threaded post x 1.4" length. 2.5" Caster, no brake and 5/16" threaded post x 1.4" length 36in WIDE X 17.25in DEEP - DROP-IN BASE PAN SIDE BRACKET SINGLE VECTOR CORNER CLEAT Kit Graphics BOM MFY-GN-03-A-G 1 MFY-GN-03-B-G 1 MFY-GN-03-C-G 1 MFY-GN-03-D-G 1 MFY-GN-03-E-G 1 MFY-GN-03-F-G 1 (41.01 w X 60.52 h total size ) 37.01 w X 56.52 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (41.01 w X 60.52 h total size ) 37.01 w X 56.52 h finish size, Unprinted 5oz. Black Soft Knit, sewn with silicone beading around perimeter & pull tab in bottom right corner (39.26 w X 60.59 h total size ) 35.26 w X 56.59 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4" NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) (39.26 w X 60.59 h total size ) 35.26 w X 56.59 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4" NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) (38.65 w X 15.88 h total size ) 34.65 w X 11.88 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (38.65 w X 15.88 h total size ) 34.65 w X 11.88 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner