Built-In Bottom Freezer Refrigerators
Architect® Series II
Product Overview
Keep your favorite ingredients tasting as fresh as the day you bought them. The ExtendFresh™ Plus Temperature Management System independently monitors temperatures to help ensure maximum taste and texture.
Image: A modern kitchen scene featuring a couple interacting near a stainless steel refrigerator. The man holds fruit, and the woman holds a knife, both smiling.
Image: A sleek, stainless steel built-in bottom freezer refrigerator.
Image: A sample of a wooden custom overlay panel for a refrigerator door.
Cabinetry by Shenandoah Cabinetry. Zodiaq Quartz Surface by DuPont.
Models and Features
Architect® Series II Models
- KBRC/LC36FT (Stainless Steel)
- KBRO/LO36FT (Requires Custom Overlay Panels and Handles)
Key Features (KBRC/LC36FT & KBLC36FT)
- ExtendFresh™ Plus Temperature Management System
- AquaSense™ Base-Grille Filtration System – Filtered by PUR®: A filter reduces impurities for fresh-tasting water and is located on the base grille, saving usable refrigerator space.
- Fahrenheit and Celsius Temperature Display
- On Demand Pulsed Defrost System: A system that helps maintain the freshness and taste of frozen foods by minimizing temperature swings in the freezer.
- Automatic Ice Maker
- Adjustable SpillClean™ Glass Shelves
- ClearVue™ SatinGlide® Crispers
- Dual Magna Seal™ Gasket System
- ClearVue™ Slide N Lock™ Door Storage
- Whisper Quiet® Compressor System
- Glass-Touch Electronic Controls
- Holiday/Sabbath Mode
- ENERGY STAR® Qualified: 20% More Energy Efficient than Department of Energy Standard.
- Star-K Certified
- Available in Stainless Steel (S)
Key Features (KBRO36FT & KBLO36FT)
- Similar to models KBRC36FT and KBLC36FT.
- Requires installation of custom overlay panels and handles.
- Available in brushed aluminum trim (X).
Product Dimensions
Diagram: Front, top, and side views of the refrigerator with dimensions labeled A through G.
| A | B* | C** | D | E* | F | G | |
|---|---|---|---|---|---|---|---|
| 36-INCH | 361⁄4" | 833⁄8" | 253⁄8" | 231⁄2" | 31⁄2" | 84" | 351⁄4" |
*Leg levelers extended 1⁄8" below rollers; add 11⁄8" for levelers fully extended 11⁄4" below rollers.
**Dimension is to front of top grille, excluding custom panel.
†Power cord.
Cutout Dimensions
Diagram: Required cutout dimensions for width, height, and depth.
| WIDTH | HEIGHT (min./max.) | DEPTH (min.) | |
|---|---|---|---|
| 36-INCH | 351⁄2" | 831⁄2"/843⁄4" | 24" |
Installation Requirements
Clearance: Allow 41⁄2" minimum space between the side of the refrigerator and a corner wall, including baseboard area. More clearance may be required for custom panels or handles.
Electrical: A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply on a separate circuit. A GFCI outlet is not recommended.
Water Supply: A cold water supply with water pressure between 30 and 120 psi (207-827 kPa). Water shutoff valve should be accessible.
Floor: Must support refrigerator (more than 600 pounds) and be level with room flooring.
Diagrams illustrate electrical outlet location, soffit height, water line location, and anti-tip board location.
Note: Dimensions are for planning purposes only. Refer to Installation Instructions packed with product for complete details. Specifications are subject to change without notice.
Contact and Additional Information
For Additional Information About KitchenAid® Appliances:
Visit KitchenAid.com or call the Customer Experience Center 1-800-422-1230.
KitchenAid logo with tagline "FOR THE WAY IT'S MADE.®".
ENERGY STAR® is a U.S. registered mark.
PUR® is a registered trademark of The Procter & Gamble Company.
Shenandoah Cabinetry is a registered trademark of American Woodmark Corporation.
Zodiaq is a DuPont registered trademark for its quartz surfaces. Only DuPont makes Zodiaq.
