Owner's Manual for nVent CADDY models including: CRLMIP Rod Lock Metal Decking Preset Anchor Insert, CRLMIP, Rod Lock Metal Decking Preset Anchor Insert, Lock Metal Decking Preset Anchor Insert, Metal Decking Preset Anchor Insert, Decking Preset Anchor Insert, Preset Anchor Insert, Anchor Insert, Insert
File Info : application/pdf, 2 Pages, 167.72KB
DocumentDocumentNVENT CADDY ROD LOCK METAL DECKING PRESET ANCHOR INSERT CATALOG NUMBER CRLMIP FEATURES Allows for the installation of leveled nVent CADDY Rod Lock Metal Decking Preset Anchors anywhere between the metal decking ribs Symmetrical design with two insert holes for each size of Rod Lock Metal Decking Preset Anchors Compatible with a very wide range of metal decking Rod Lock Metal Decking Preset Anchors can be easily inserted through the insert plate while maintaining a tight positioning of the anchor Holes on each end of the insert for fixing to metal deck with self-tapping screws or nail gun Quick and easy installation PRODUCT ATTRIBUTES Material: Steel Finish: Pregalvanized Hole Size 1: 3/4" Hole Size 2: 7/8" Hole Size 3: 0.260" Length: 12" Width: 1 1/2" Thickness: 0.140" A: 3" Max B: 10" Max DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty. North America +1.800.753.9221 Option 1 Customer Care Option 2 Technical Support Europe Netherlands: +31 800-0200135 France: +33 800 901 793 Europe Germany: 800 1890272 Other Countries: +31 13 5835404 APAC Shanghai: + 86 21 2412 1618/19 Sydney: +61 2 9751 8500 Our powerful portfolio of brands: nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER © 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of 2 their respective owners. nVent reserves the right to change specifications without notice.