Cybex Orfeo Stroller

Setting Up the Stroller

1. Unpack all components. Lay out the stroller frame, wheels, and any accessories.
2. Attach the rear wheels to the frame by sliding them onto the axles until they click securely.
3. Attach the front wheels to the front fork assembly. Ensure they are properly oriented.
4. Unfold the stroller frame by releasing the main lock and pulling up on the handle.
5. Attach the seat unit to the stroller frame.
6. Attach the canopy support bars and then the sun canopy.
7. Secure the harness straps and adjust them to fit the child.
8. Engage the front wheel swivel lock if desired for stability on uneven terrain.

Folding and Unfolding

1. To fold, press the release buttons (a and b) located on the handlebar and push down on the frame.
2. The stroller will fold into a compact unit. Secure the frame with the fold lock.
3. To unfold, release the fold lock and pull up on the handlebar until the frame is fully extended and locked.
4. The folded stroller can be carried using the integrated handle.

Harness Operation

1. Insert the two shoulder strap buckles into the central crotch buckle.
2. Press the center release button on the buckle to unfasten.
3. Adjust the shoulder and crotch strap lengths by pulling the adjusters to ensure a snug and safe fit for the child.
4. Ensure the harness is correctly positioned and tightened. A correctly fitted harness should keep the child securely seated without restricting movement.
5. Check that the child's head is positioned above the backrest line for optimal safety.

Adjusting the Backrest

To recline the backrest, locate the adjustment lever behind the seat. Pull the lever and move the backrest to the desired angle. Release the lever to lock it in place.

Adjusting the Legrest

The legrest can be adjusted to multiple positions. Use the adjustment mechanism located on the side of the legrest to change its angle.

Using the Sun Canopy

Extend the sun canopy to provide shade. It can be adjusted to cover the child effectively. Secure the canopy using the attachment points on the stroller frame.

Operating the Brake

To engage the brake, press down firmly on both rear brake pedals. To release, lift the pedals upwards. Ensure the brake is engaged when the stroller is stationary.

Wheel Maintenance

Removing Wheels: Press the release button on the wheel hub and pull the wheel off the axle. (Requires 2x per wheel for some steps).

Attaching Wheels: Align the wheel with the axle and push firmly until it clicks into place. (Requires 2x per wheel for some steps).

Seat Fabric Care

The seat fabric can be removed for cleaning. Unfasten all clips and straps holding the fabric to the stroller frame. Follow care instructions for washing.

Attaching Infant Car Seats

Adapter Installation: Attach the infant car seat adapters to the stroller frame. Ensure they are securely locked.

Car Seat Attachment: Place the compatible Cybex infant car seat onto the adapters. Push down firmly on both sides until you hear a click, indicating it is securely locked. Always verify the connection.

Note: Ensure the infant car seat is correctly oriented and securely fastened before each use.

Using the Rain Cover

Drape the rain cover over the stroller, ensuring it covers the child and the seating area completely. Secure the rain cover using the fastening tabs or straps around the stroller frame. Ensure adequate ventilation.