X01 Folding and Rotating Car Mount

Product Overview

The X01 Folding and Rotating Car Mount is designed for convenient and safe use of your smartphone in the car. It features a dual-coil wireless charging system and a dual-motor design for 90-degree rotation, allowing for easy angle adjustment.

Packaging List and Parameter

Product Name:

Folding And Rotating Car Mount

Specifications:

• Power: 15W, 10W, 7.5W, 5W
• Effective transmission distance: 0-6mm
• Size: 155mm*70mm*80mm
• Charging interface: USB TYPE-C
• Built-in battery: 150mAh

Packaging List:

• Car bracket x 1
• Instruction manual x 1
• Data cable x 1
• Car air outlet base (clip) x 1

Product Features:

• The product is designed as a double coil for efficient wireless charging.
• Achieves 90-degree rotation through a dual motor design, allowing for arbitrary angle switching of the bracket.

Specification Parameters

• Weight: 215.4g
• Material: ABS+PC+electroplating+aluminum sheet hardware
• Input voltage/current: 5V/2A, 12V/1.5A
• Output power: 15W/10W/7.5W automatic recognition
• Rated frequency: 110K-205KHz
• Charging distance: 0-5mm
• Charging interface: TYPE-C
• Supports QC wireless fast charging for devices such as:

Huawei: HUAWEI P60/P50/P40/P30 Series, HUAWEI Mate60/50/40/30 Series, Mate X/XS/X2/XS2, HUAWEI Mate X3/Mate X5 Series

iPhone: IPHONE 8/X/11/12/13/14/15 Series

Samsung: Note20/10/9/8 Series, S10/9/8 Series, GALAXY Fold 5, Fold 6/, GALAXY W23/W24

Xiaomi: MIX FOLD 3/FOLD 4

Oppo: OPPO Find N/N2/N3 Series

Vivo: VIVO X Fold/X Fold 2/X Fold 3/X Fold+

Honor: Magic V2/V3/V Flip/VS/VS3

Functional Components

Diagram showing the components:

• ① Pinch arm touch button
• ② Rotating touch button
• ③ Left And Right Clamping arms
• ④ Lighting Logo
• ⑤ Dual coil charging area
• ⑥ Rotating Motor
• ⑦ Clamp Arm Motor
• ⑧ Heat Dissipation

Instructions for Use

1. When using, connect this product to the compatible data cable.
2. Connect the USB end of the data cable to the car interface (such as cigarette lighter converter and USB charging interface).
3. The base clip can be used to clamp the air conditioning vent and can also be placed in other places that can be clipped.
4. After connecting the device to a 5-9V DC power supply, touch the left button to open the wings. Place the phone on the mount, and after one second, the wings will automatically close. The wireless fast charging will then begin charging the phone.
5. To remove the phone, touch the button and the left wing will automatically open. Once the phone is removed, the wings will automatically close.
6. The right touch button allows the bracket to automatically rotate 90 degrees to the left, positioning the phone upright. This product has a built-in battery that allows the opening and closing of the arms by touch even in case of power failure.
7. This device has built-in overvoltage protection, over-temperature protection, magnetic field protection, and short-circuit protection. If an anomaly occurs, it will automatically stop working.

Cautions

• Do not over-squeeze or collide the device.
• Do not use this product in severe high temperature, humidity, or corrosive environments to avoid damaging the device's circuit.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Qualified Certificate

CHECKER: [Inspector's Name/ID]

DATE: [Date of Inspection]

QC 08

Thank you for using this product!