HumanHome R35 Wall Mount & Ceiling Flush Mount Installation Instructions
Brand: HumanHome
Website: www.humanhome.co
Contact: customercare@humanhome.co
Safety First
CAUTION: Before starting, turn off power at the main circuit panel.
ATTENTION: Coupez l'alimentation avant de procéder à l'installation.
ADVERTENCIA: Antes de comenzar la instalación, apague la corriente en el tablero principal.
Ceiling Flush Mount Installation
Tools Required (Not Included): Flat Head Screwdriver
Components: G8 LED Bulb x1
Step 4:
Press in socket and tighten set screw with flat head screwdriver.
Step 5:
Insert bulb and attach magnetic lamp shade to complete assembly.
Wiring and Assembly Diagram Description:
The diagram shows the ceiling flush mount installation. It illustrates connecting wires using wire connectors. The LIVE wire connects to the BLACK wire, the NEUTRAL wire to the WHITE wire, and the GROUND wire to the GREEN screw. The crossbar is then fastened to the junction box. Finally, the backplate is aligned and the socket body is fastened to the crossbar.
- Connect wires together using included wire connectors:
- A. LIVE wire to BLACK wire
- B. NEUTRAL wire to WHITE wire
- C. GROUND wire to GREEN screw
- Fasten crossbar to junction box.
- Align backplate and fasten socket body to crossbar.
Wall Mount Installation
Tools Required (Not Included): Flat Head Screwdriver
Components: G8 LED Bulb x1
Step 4:
Press in socket and tighten set screw with flat head screwdriver.
Step 5:
Insert bulb and attach magnetic lamp shade to complete assembly.
Wiring and Assembly Diagram Description:
The diagram shows the wall mount installation. It illustrates connecting wires using wire connectors. The LIVE wire connects to the BLACK wire, the NEUTRAL wire to the WHITE wire, and the GROUND wire to the GREEN screw. The crossbar is then fastened to the junction box. Finally, the backplate is aligned and the socket body is fastened to the crossbar.
- Connect wires together using included wire connectors:
- A. LIVE wire to BLACK wire
- B. NEUTRAL wire to WHITE wire
- C. GROUND wire to GREEN screw
- Fasten crossbar to junction box.
- Align backplate and fasten socket body to crossbar.