User Manual for sunlighten models including: EP-02, USB Media Player, SD Media Player
On the stereo, repeatedly press the SRC button to scroll through the audio sources. Stop when you see "BT" for Bluetooth. *BT will not be visible for selection ...
2. Go to Bluetooth settings on the device you'd like to pair with the stereo. From the "Available Devices" list, select "Sunlighten." 3. On the stereo, repeatedly press the SRC button to scroll through the audio sources. Stop when you see "BT" for Bluetooth. *BT will not be visible for selection unless a device is ready to pair with the stereo. 1.
1. Reset the stereo. To do this, first remove the faceplate by pressing the eject button near the mute button. On the body of the stereo, there is a pin hole with an arrow saying reset. Using a slender object (toothpick, paper clip, etc.), press and hold the reset button for 5-10 seconds. Then replace the faceplate. 2.
User manual
Bluetooth Connectivity and Troubleshooting A.R.T. Activation Specifications Troubleshooting
Please read the instructions carefully before operating.
1
Installation
Read carefully prior to installation
1. Make sure to connect other wires before power connection. 2. To avoid short circuit, please make sure all exposed wiring is insulated. 3. Please fix all wires after installation. 4. Incorrect connection may cause malfunction or damage to the electrical system;
make sure all connections are made according to instruction.
Installation Steps
Insert the keys supplied on both sides of the unit until they click. Remove the unit from the dashboard by pulling the keys.
2
LOCATION OF CONTROLS
power "MUTE"
18. Volume button/MENU button
4
KEY FUNCTIONS
4
KEY FUNCTIONS
5
OPERATION
Click the SRC button to activate the stereo. Default is FM radio. Once powered on, quick presses of the SRC button will cycle through the various audio sources. Pressing and holding the SRC button will power the stereo unit off.
The unit has two input ports with AUX 3.5mm jacks. It can be connected to a portable audio player through the AUX IN jack. Press SRC button to switch to F-AUX/R-AUX mode when inserting an audio source to the unit. The RESET button is to be activated if the radio does not turn on or if having issues. Hold the reset button down for five seconds in order to reset. Tune a radio station
6
OPERATION
Automatic Press TS button for two seconds to scan and store stations. Press TS button to scan the preset stations stored in 1-6 of band 1-3. Manual To store a station, press one of the preset buttons (1-6) for two seconds. The current station will then save to that number. Press the preset buttons (1-6) to listen to the station saved in the corresponding preset button. When a USB driver/SD card is inserted into the unit, the unit will play the MPS/WMA file automatically. If a USB/SD card is already inserted in the unit, keep pressing
7
OPERATION
Bluetooth Connectivity
1. Activate the stereo by pressing the SRC button.
*Do not to hold the SRC button down as that is for deactivation.
2. Go to Bluetooth settings on the device you'd like to pair with the stereo. From the "Available Devices" list, select "Sunlighten ."
3. On the stereo, repeatedly press the SRC button to scroll through the audio sources. Stop when you see "BT" for Bluetooth.
*BT will not be visible for selection unless a device is ready to pair with the stereo.
Acoustic Resonance Therapy (A.R.T.) - optional add-on
How to activate A.R.T. on your stereo: 1. Power the unit on using the SRC button. 2. Press the volume knob until "ART OFF" displays and then turn the volume knob clockwise until the display reads, "ART ON." 3. Press the volume knob until "ART" displays on the left with two digits on the right. 4. Use the volume knob to adjust the intensity of the A.R.T. system.
8
SPECIFICATION
TROUBLESHOOTING
mPulse Audio Troubleshooting with Stereo
If there is no audio from tablet but stereo is functioning, please check the following: 1. The stereo is set to "R-AUX" source - check back of stereo to ensure connection (lowest port) 2. The volume is turned up on the stereo 3. The volume is turned up on the application 4. The volume is turned up through the tablet itself. To do this, go to the "settings/set-up" tab, then click "Set-up your wireless connection." Next, scroll down and click on "Sound" and then "Volumes."
9
TROUBLESHOOTING
Bluetooth Troubleshooting
To start troubleshooting a Bluetooth connectivity issue, please complete the following steps:
1. Reset the stereo. To do this, first remove the faceplate by pressing the eject button near the mute button. On the body of the stereo, there is a pin hole with an arrow saying reset. Using a slender object (toothpick, paper clip, etc.), press and hold the reset button for 5-10 seconds. Then replace the faceplate.
2. Reboot the stereo and attempt the connection again. If this doesn't work, try step #3.
3. Test the stereo with another Bluetooth device.
persist afterwards, consult Sunlighten Customer Care @ 877.292.0020 x402.
No power to stereo or sauna.
Check sauna power circuit breaker. Otherwise, please call Sunlighten Customer Care at 877.292.0020,
x402. M-F, 9am-7pm CST.
Check wiring connection on roof of sauna.
Insert the antenna cable firmly in back of stereo and check antenna connection on roof of sauna.
Version 102120 10
Microsoft Word 2016