CYP PUV-3050TX-UA UHD+ HDMI over HDBaseT3 Transmitter with Analogue Audio I/O and USB 2.0 User Manual

User Manual for CYP models including: PUV-3050TX-UA UHD HDMI over HDBaseT3 Transmitter with Analogue Audio I O and USB 2., PUV-3050TX-UA, UHD HDMI over HDBaseT3 Transmitter with Analogue Audio I O and USB 2.00, Transmitter with Analogue Audio I O and USB 2.00, Analogue Audio I O and USB 2.00

Manual

PUV-3050TX-UA - UHD HDMI over HDBaseT3 Transmitter with analogue audio I/O & USB 2.0 pathway (18Gbps, 4K@60Hz 4:4:4, 8-bit, HDR) - CYP Europe

PUV-3050TX-UA Manual

PUV-3050TX-UA - UHD HDMI over HDBaseT3 Transmitter with analogue audio I/O & USB 2.0 pathway (18Gbps, 4K@60Hz 4:4:4, 8-bit, HDR) - CYP

File Info : application/pdf, 20 Pages, 4.56MB

PUV-3050TX-UA PDF-Manual RDV1.1

PUV-3050TX-UA
UHD+ HDMI over HDBaseT3 Transmitter with Analogue Audio I/O & USB 2.0
OPERATION MANUAL

DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means--electronic, mechanical, magnetic, optical, chemical, manual, or otherwise--without express written permission and consent from CYP (UK) Ltd.
© Copyright 2021 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:
· Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
· To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
· Never spill liquid of any kind on or into this product.
· Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
· Do not attach the power supply cabling to building surfaces.
· Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
· Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
· To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.
· Please completely disconnect the power when the unit is not in use to avoid wasting electricity.

VERSION HISTORY

REV. DATE RDV1 2021/12/06 RDV1.1 27/10/2022

SUMMARY OF CHANGE Preliminary release New IR/RS-232 Diagrams

CONTENTS
1. Introduction ..................................................1 2. Applications ..................................................1 3. Package Contents .........................................1 4. System Requirements ..................................1 5. Features.........................................................2 6. Operation Controls and Functions ..............3
6.1 Front Panel ............................................................3 6.2 Rear Panel...............................................................4 6.3 IR Cable Pinouts ...................................................5 6.4 Serial Pinout ..........................................................5 6.5 Audio Pinouts........................................................5 7. Connection Diagram ....................................6 8. Specifications................................................7 8.1 Technical Specifications ....................................7 8.2 Video Specifications............................................8 8.3 Audio Specifications........................................ 10
8.3.1 Digital Audio ........................................... 10 8.3.2 Analogue Audio ..................................... 10 8.4 Cable Specifications ........................................ 11 8.5 HDBaseT Features............................................. 12 9. Acronyms.....................................................13

1. INTRODUCTION
This 4K UHD+ HDMI over HDBaseT transmitter uses HDBaseT 3.0, the newest generation of HDBaseT technology, and is the perfect solution for extending full bandwidth (18Gbps) HDMI 2.0, 4K@60Hz (4:4:4, 8-bit) video with HD audio via a single run of Cat.6A/7 cable over distances of up to 40 meters. Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, USB 2.0. This transmitter is ideal for use in any video extension scenario, especially when latencyfree, uncompressed, high resolution video is critical, such as medical installations, live conferences, and education.
When used with its matched receiver, 2 micro USB host connections are available (1 on the transmitter, 1 on the receiver) for connecting a single USB host (such as a laptop or PC) to devices on up to 4 USB 2.0 (Type-A) ports (2 on the transmitter, 2 on the receiver) forming a highly flexible KVM extension configuration.
2. APPLICATIONS
Household entertainment sharing and control Lecture hall/classroom display and control Meeting room presentation and control
3. PACKAGE CONTENTS
1× UHD+ HDMI over HDBaseT Transmitter with USB KVM 1× 24V/2.7A DC Power Adapter 2× 3-pin Terminal Block 1× 8-pin Terminal Block 1× Operation Manual
4. SYSTEM REQUIREMENTS
HDMI source equipment such as media player, video game console, or set-top box.
HDMI receiving equipment such as an HDTV, monitor, or audio amplifier.
A compatible HDBaseT receiver with PoH (PD) support is recommended.
The use of Premium High Speed HDMI cables, and industry standard Cat.6A or Cat.7 Ethernet cable is highly recommended.
1

5. FEATURES
HDMI 2.0 and DVI 1.0 compatible HDCP 2.2 and HDCP 1.x compliant HDBaseT 3.0 compliant (Backwards compatible with HDBaseT 2.0/1.0) 1 HDMI input, 1 HDMI output, and 1 HDBaseT output Supports up to 4K UHD+ (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input
and output over both HDMI and HDBaseT Supports Deep Colour input and output up to 12-bit Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output Supports CEC bypass HDBaseT extends video, audio and data over a single Cat.6A/7 cable
and can reach distances up to 40m/131ft HDBaseT feature support: HD Video and Audio, PoH (PSE), Bi-
directional audio (analogue), and Control (bi-directional USB/IR/RS-232 pass-through) 2 USB 2.0 Type-A device ports and 1 Micro USB host port Selectable HDMI audio extraction/analogue audio bypass functionality when paired with a compatible receiver HDMI output functions as a local monitor Supplies PoH to the connected receiver
2

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

IN
TEST PASS

OUT L

PUV-3050TX-UA

AUDIO

R PWR

FAIL LINK

2 4 5 6 8 10
1 AUDIO IN 3-pin Terminal Block: Connect to the analogue audio output of a device such as a media player or game console using a 3-pin adapter cable. Audio is sent to the analogue audio output on the connected compatible receiver.
2 AUDIO OUT 3-pin Terminal Block: Connect to powered speakers or an amplifier for analogue audio output using a 3-pin adapter cable. Audio is sourced from the analogue audio input on the connected compatible receiver.
3 RS-232 4-pin Terminal Block: Connect to a PC, laptop, or serial controllable device with a 4-pin adapter cable for the extension of RS-232 signals between both ends of the HDBaseT connection.
4 IR 4-pin Terminal Block (In/Out): Connect to both an IR Blaster and Extender using a 4-pin Y-adapter cable to transmit and receive IR control signals and extend them to devices connected to the other end of the HDBaseT connection.
5 USB 2.0 Ports (Type-A): Connect directly to standard USB devices such as a mouse, keyboard, or flash drive to extend their USB functionality to the currently active Micro-USB host port.
6 TEST Button: Press this button to initiate a simple HDBaseT cable quality test. While the test is in process, both the TEST and FAIL LEDs will blink.
Note: This feature requires connection to a compatible receiver. This function will not provide a result if no receiver is connected.
7 PASS LED: This LED will illuminate solidly to indicate that the most

recent cable test result was successfully passed. 8 FAIL LED: This LED will illuminate solidly to indicate that the most
recent cable test resulted in a failure with too many detected errors. 9 POWER LED: This LED will illuminate to indicate the unit is on and
receiving power. 10 LINK LED: This LED will illuminate solidly when a live connection with
a compatible receiver is active.
6.2 Rear Panel

DC24V

USB

CAT6A/7 OUT

HDMI IN

HDMI OUT

12 3

1 DC 24V/2.7A Port: Plug the 24V/2.7A DC power adapter into this port and connect it to an AC wall outlet for power.
2 USB 2.0 Port (Micro-B) & LED: Connect directly to a standard USB host such as a PC or laptop to extend their USB functionality to all currently connected USB devices on both ends of the HDBaseT connection. The LED will illuminate solidly to indicate when the USB port is active.
Note: If USB hosts are connected to both the transmitter and receiver at the same time, only the most recently connected host will be active.
3 CAT6A/7 OUT Port: Connect to a compatible HDBaseT receiver with a single Cat.6A/7 cable for extension of all data signals. PoH will also be supplied to a connected compatible PD receiver.
Note: The PoH function is designed for powering compatible receiver units only. Non-PoH receivers will need their own power supply. Receivers from other brands may not be compatible.
4 HDMI IN Port: Connect to HDMI source equipment such as a media player, game console, or set-top box.
5 HDMI OUT port: Connect to an HDMI TV, monitor, or amplifier for digital video and audio output.

6.3 IR Cable Pinouts IR Blaster + IR Extender

To IR Emitter 4-pin Terminal Block
To IR Reciever

1 NC 2 NC 3 GND (White) 4 TxD (Red)
1 RxD (White) 2 3.3V (Red) 3 GND (Black) 4 NC

6.4 Serial Pinout

1 NC 2 RxD (Red) 3 GND (Black) 4 TxD (White)

6.5 Audio Pinouts Stereo Audio Input
3-pin Terminal Block

Stereo Audio Output
3-pin Terminal Block

1 RIGHT 2 GND 3 LEFT

7. CONNECTION DIAGRAM
Tower PC

Local Monitor

Power Supply

3m 7m 3m 60°

USB

RS-232

HDMI

Input

USB

OUT L

PUV-3050TX-UA

AUDIO

R PWR

AUDIO BYPASS EXTRACT LINK

DC24V

USB CAT6A/7 OUT

HDMI IN

HDMI OUT

1.5m 60°
IR Input & Output
HDMI Output

RS-232

OUT L

PUV-3050RX-UA

AUDIO

R PWR

AUDIO BYPASS EXTRACT LINK

USB CAT6A/7 IN

HDMI IN

HDMI OUT

Cat 6A/7

Cable

USB

IR Input & Output
USB

HDMI Output

Keyboard & Mouse

60° 1.5m
60° 3m 7m 3m

Serial Controlled Device

HDTV

8. SPECIFICATIONS

8.1 Technical Specifications

HDMI Bandwidth

18Gbps

HDBaseT Bandwidth

18Gbps

Input Ports

1×HDMI (Type-A) 1×Analogue Stereo (3-pin Terminal Block)

Output Ports

1×HDBaseT (RJ-45) 1×HDMI (Type-A) 1×Analogue Stereo (3-pin Terminal Block)

Pass-through Ports

1×IR In/Out (4-pin Terminal Block) 1×RS-232 (4-pin Terminal Block) 2×USB 2.0 (Type-A)

Pass-through/Service Port 1×USB 2.0 (Micro-B)

IR Frequency

30 ~ 50kHz (30 ~ 60kHz under ideal conditions)

Baud Rate

Up to 115200

Power Supply

24V/2.7A DC (US/EU standards, CE/FCC/UL certified)

ESD Protection (HBM)

±8kV (Air Discharge) ±4kV (Contact Discharge)

Dimensions (W×H×D)

128mm×25mm×108mm [Case Only] 128mm×25mm×112.5mm [All Inclusive]

Weight

400g

Chassis Material

Metal (Steel)

Chassis Colour

Black

Operating Temperature 0°C 50°C/32°F 122°F

Storage Temperature

-20°C 60°C/-4°F 140°F

Relative Humidity Power Consumption

20 90% RH (Non-condensing) 12W

8.2 Video Specifications

Supported Resolutions (Hz) 720×400p@70/85 640×480p@60/72/75/85 720×480i@60 720×480p@60 720×576i@50 720×576p@50 800×600p@56/60/72/75/85 848×480p@60 1024×768p@60/70/75/85 1152×864p@75 1280×720p@50/60 1280×768p@60/75/85 1280×800p@60/75/85 1280×960p@60/85 1280×1024p@60/75/85 1360×768p@60 1366×768p@60 1400×1050p@60 1440×900p@60/75 1600×900p@60RB 1600×1200p@60

Input HDMI

Output

HDMI HDBT

Supported Resolutions (Hz) 1680×1050p@60 1920×1080i@50/60 1920×1080p@24/25/30 1920×1080p@50/60 1920×1200p@60RB 2560×1440p@60RB 2560×1600p@60RB 2048×1080p@24/25/30 2048×1080p@50/60 3840×2160p@24/25/30 3840×2160p@50/60 (4:2:0) 3840×2160p@24, HDR10 3840×2160p@50/60 (4:2:0), HDR10 3840×2160p@50/60 4096×2160p@24/25/30 4096×2160p@50/60 (4:2:0) 4096×2160p@24, HDR10 4096×2160p@50/60 (4:2:0), HDR10 4096×2160p@50/60

Input HDMI

Output

HDMI HDBT

8.3 Audio Specifications

8.3.1 Digital Audio

HDMI Input / HDMI & HDBaseT Output

LPCM

Max Channels

8 Channels

Sampling Rate (kHz) 32, 44.1, 48, 88.2, 96, 176.4, 192

Bitstream

Supported Formats Standard & High-Definition

8.3.2 Analogue Audio

Analogue Input

Max Audio Level

2Vrms

Impedance

10k

Type

Unbalanced

Analogue Output

Max Audio Level

2Vrms

THD+N

< -80dB@0dBFS 1kHz (A-wt)

SNR

> 80dB@0dBFS

Frequency Response < ±0.5dB@20Hz~20kHz

Crosstalk

< -71dB@10kHz

Impedance

499

Type

Unbalanced

8.4 Cable Specifications

Cable Length High Speed HDMI Cable HDMI Input HDMI Output Ethernet Cable Cat.5e/6 Cat.6A/7
Bandwidth Category Examples:

1080p

4K30 4K60

(4:4:4) (4:4:4) 8-bit 12-bit 8-bit 8-bit

10m 10m 5m 3m 10m 10m 5m 3m

N/A

40m

*Results with Cat 5e/6 will vary

1080p (FHD Video) - Up to 1080p@60Hz, 12-bit colour - Data rates lower than 5.3Gbps or below 225MHz TMDS clock
4K30 (4K UHD Video) - 4K@24/25/30Hz & 4K@50/60Hz (4:2:0), 8-bit colour - Data rates higher than 5.3Gbps or above 225MHz TMDS clock but below 10.2Gbps
4K60 (4K UHD+ Video) - 4K@50/60Hz (4:4:4, 8-bit) - 4K@50/60Hz (4:2:0, 10-bit HDR) - Data rates higher than 10.2Gbps

8.5 HDBaseT Features
HDBaseT Feature Set Video & Audio Extension LAN Extension Send power to Receiver Accept power from Receiver IR Extension RS-232 Extension USB 2.0 Extension

Transmitter Supported Unsupported Supported (PoH) Unsupported Supported Supported Supported

9. ACRONYMS

ACRONYM 4K UHD 4K UHD+ AVoIP Cat.5e Cat.6 Cat.6A Cat.7 DVI EDID GbE Gbps HDBT HDCP HDMI HDR IR kHz LED LPCM MHz PD PoH PSE TMDS

COMPLETE TERM 4K Ultra-High-Definition (10.2Gbps max) 4K Ultra-High-Definition (18Gbps max) Audio/Video over IP Enhanced Category 5 cable Category 6 cable Augmented Category 6 cable Category 7 cable Digital Visual Interface Extended Display Identification Data Gigabit Ethernet Gigabits per second HDBaseT High-bandwidth Digital Content Protection High-Definition Multimedia Interface High Dynamic Range Infrared Kilohertz Light-Emitting Diode Linear Pulse-Code Modulation Megahertz Powered Device Power over HDBaseT Power Sourcing Equipment Transition-Minimised Differential Signaling

ACRONYM USB VGA WUXGA (RB)
XGA

COMPLETE TERM Universal Serial Bus Video Graphics Array Widescreen Ultra Extended Graphics Array (Reduced Blanking) Extended Graphics Array

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA
Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279 Email: sales@cypeurope.com www.cypeurope.com RDV1.1

Adobe PDF Library 16.0.7 Adobe InDesign 17.4 (Macintosh)