REINECKER mezzo EDU Video Magnifier User Manual

User Manual for REINECKER models including: mezzo EDU, Video Magnifier, mezzo EDU Video Magnifier, Magnifier

mezzo EDU EN - reineckervision.de

10 11 II. Instructions for the reading system mezzo EDU Delivery content Reading system mezzo EDU, 16” monitor MEZEDU01 Carrying bag (Space for mezzo EDU 16”) MEZVARTA Power adapter 12V DC / 5000mA

PDF mezzo EDU EN - reineckervision.de

10 11 II. Instructions for the reading system mezzo EDU Delivery content Reading system mezzo EDU, 16" monitor MEZEDU01 Carrying bag (Space for mezzo EDU 16") MEZVARTA Power adapter 12V DC / 5000mA

Mezzo EDU User Manual

Mezzo EDU Electronic Video Magnifier

File Info : application/pdf, 19 Pages, 1.66MB

GA mezzo EDU V1.1 en

User manual
mezzo EDU
Please read this user manual carefully prior to
installation, use and maintenance for your own safety and in order
to avoid damages at your system.

Reinecker Vision GmbH
Sandwiesenstraße 19 · 64665 Alsbach-Hähnlein Email: info@reineckervision.de · www.reineckervision.de
KKoonnffoorrmmiittäättsseerrkklläärruunngg
DDeeccllaarraattiioonn ooff ccoonnffoorrmmiittyy
Wir erklären in alleiniger Verantwortung für alle unsere Systeme, dass diese mit den folgenden Richtlinien übereinstimmen.
We declare under our sole responsibility that the systems, which have been brought into the market by us, meet the requirements of the following regulations.
mezzo EDU
Richtlinie 2017/745/EU Medical Device Regulation (MDR) Risikoklasse I nach Anhang VIII Regel 13 CE Konformität nach Anhang IX
und RoHS II (Richtlinie 2011/65/EU)
Regulation (EU) 2017/745 concerning medical devices risk class I
according to Annex VIII standard 13 CE conformity of Annex IX and
RoHS II Regulation (EU) 2011/65

Die CE Kennzeichnung auf dem Gerät dokumentiert diese Übereinstimmung. The CE mark on the system points out this accordance.

Alsbach-Hähnlein,

M. Reinecker Geschäftsführer M. Reinecker General Manager

...............0.1....0..1...2..0..2.1...............

...................................................

Ort und Datum der Ausstellung

Name und Unterschrift des Befugten

Place and date of issue

Name and signature of the authorized person

Content

I. General Information ...............................................................................................6

Notes on the electromagnetic compatibility (EMC) .....................................................6

Storage of the user manual.........................................................................................6

Product description......................................................................................................6

Medical device.............................................................................................................7

Purpose .......................................................................................................................7

Evolution and lifetime of products ...............................................................................7

Safety advice...............................................................................................................7

Combination with other medical products ...................................................................7

Precautions by alteration of the performance of the system ......................................8

Reinstatement/installation and maintenance...............................................................8

Cleaning of the system................................................................................................8

Special advice for transport and storage ....................................................................8

Disposal of the unit according to (EU) 2012/19

................................................8

Power supply...............................................................................................................8

Safety instructions to avoid damage ...........................................................................9

II. Instructions for the reading system mezzo EDU .............................................10
Delivery content.........................................................................................................10
Available Options ......................................................................................................10
Cameras ....................................................................................................................10 Focus camera: FullHD camera with digital zoom and comfort auto-focus.........10 Distance camera: FullHD+ camera with optical and digital zoom......................10
Starting with mezzo EDU ..........................................................................................10 Mains operation ..................................................................................................10 Power ON ...........................................................................................................10 Power OFF ......................................................................................................... 11 Automatic saving of device settings ................................................................... 11 Replacement of lighting ...................................................................................... 11 Important note to the use of power supply......................................................... 11
Installation of the system........................................................................................... 11
Alignment of monitor .................................................................................................13
Connection of the unit ...............................................................................................14
Description of the control elements...........................................................................14 Power switch ON/OFF........................................................................................14 Light adjustment (50% / OFF / 100%)...............................................................14
General note on using the LED-light.........................................................................14

Description of the control bar ....................................................................................15 Switching button distance mode / document mode.............................................15 Menu settings ON /OFF ......................................................................................15 Brightness ...........................................................................................................15 Color settings......................................................................................................16 Zoom OUT..........................................................................................................16 Zoom IN..............................................................................................................16 Auto-focus ON /OFF ...........................................................................................16 Line marker/Shadowing /Auto-Exposure ON / OFF.............................................16 Auto-Exposure ON/OFF (autom. aperture control) ............................................17 Line marker/Shadowing horizontal .....................................................................17 Line marker/Shadowing vertical .........................................................................17 5-button control panel (distance camera control)...............................................17 Navigation of the distance camera .....................................................................17
Down .........................................................................................................................17
Right ..........................................................................................................................17 Saving the position of the distance camera .......................................................18 Recall saved positions........................................................................................18 Function ,,Last position" ......................................................................................18
Menu settings mezzo EDU........................................................................................19 Opening the menu ..............................................................................................19 Select menu options ...........................................................................................19 Change menu options and confirm ....................................................................19 Menu options ......................................................................................................20
Menu settings distance camera ................................................................................22 Opening menu ....................................................................................................22 Change menu option and confirm ......................................................................22 Change menu option ..........................................................................................22 Menu options ......................................................................................................22
Troubleshooting .........................................................................................................30
Technical details ........................................................................................................30
Warranty Information .................................................................................................31
Notes .........................................................................................................................32

I. General Information
Important notes on the operation of the reading system mezzo EDU! Please read them carefully prior to the operation of the reading system!

Notes on the electromagnetic compatibility (EMC)
This reading system is suited for use in all set-ups including the domicile that are connected directly to a public power supply for buildings with residential purposes.
This reading system is designed for the use in the indicated electromagnetic environment. The user should ensure the use in the indicated environment.
This reading system operates on HF-Energy exclusively for its own function. Therefore the emitted interference of high frequency disturbances is very low and the interference with other appliances operated close-by is improbable. When operating the reading system simultaneously with other systems, however, the possibility of disturbances of the system or other systems should not be neglected.
For this reason it should be ensured that the system is not placed directly beside or on top of another system. If the set-up of this system in the proximity of medical, measuring devices cannot be avoided, the operator of these devices has to be informed that it is necessary to observe the performance of the system to control the conventional use of the system in the chosen set-up.
Electronic devices are sensitive towards electric discharge and towards high frequency electromagnetic fields.
Attention: In order to avoid high frequency disturbances the operator should respect a minimum distance of one meter to portable and mobile HF-telecommunication devices.
Please also see chapter: Safety advice (page 7).

Storage of the user manual
The user manual is an essential part of your reading system. Please keep the booklet in a safe place for future reference.

Product description
mezzo EDU is an opto-electronic reading system for magnifying text and pictures for professional and permanent private use. Text and pictures are captured using the integrated cameras and displayed on the monitor.

lightweight and compact reading system with 16" LED monitor for comfortable reading and distance viewing

two easy-to-use cameras, high ease of use of the motorized distance camera: switch between internal and distance camera picture display with up to four
storable positions

switchable monitor display (distance camera to document camera image and vice versa)

-technology for high quality pictures with virtually no picture noise

Adjustable monitor for comfortable reading position, easy positioning and effortless assembly/disassembly
compact folding function
Medical device
This reading system is classified as a medical device, class I according to (EU) 2017/745, Annexe VIII, standard 13. For the distribution to countries outside the EU the respective country-specific guidelines have to be regarded.
Purpose
This opto-electronic reading system is a medical device to assist with the reading and magnifying of printed text and pictures. Visually impaired people can compensate for their loss of visual acuity by using this device.
Evolution and lifetime of products
The Medical Device Directive regulates by law that manufacturers of medical devices shall determine a period of safety operation of a product. We fulfill hereby legal requirements and determine - for formal reasons - a period of three years after date of first purchase. Note: The mentioned life span does not reflect the complete life span of the mezzo EDU. It is rather an indication on when the product might be obsolete and substitution might be recommended due to new product developments.
Safety advice
The device has to be installed in closed and dry rooms only. Do not plug it into an electrical circuit that is also being used for any life sustaining or support systems. The device may not be used in the patients environment. This device should not be operated in explosion-endangered environments. This opto-electronic device should only be installed in conjunction with modern electrical circuitry.
Combination with other medical products
If the device is used near another electrical device, monitor the other device to ensure that it is working properly. In case of doubt please contact Reinecker Vision GmbH or any licensed distribution partner.
7

Precautions by alteration of the performance of the system
Stop using the reading device if technical features or performances should change. Switch the device OFF and disconnect the power supply from the mains wall socket. Refer directly to your authorized dealer or to Reinecker Vision GmbH Service Center. Do not use the system again in this condition.
Reinstatement/installation and maintenance
This device may be technically maintained and reconditioned by Reinecker Vision GmbH only or by an authorized technician. Reinstatement may only take place after the system has been cleaned and safety checked.
Cleaning of the system
mezzo EDU has to be disconnected from the power supply before cleaning. Clean the system with a slightly damp cloth and a mild household detergent. Interior of device must NOT come in contact with liquids.
Special advice for transport and storage
For reasons of safety, the unit must only be transported and stored in the original packing. The unit must be stored in dry and closed rooms in the original packing. The following conditions for transport and storage have to be respected: Air pressure 700 - 1000 hPa Temperature range +5°C to + 50°C Relative air humidity 30% to 80%
Disposal of the unit according to (EU) 2012/19
The device contains of electronic components. To avoid damage to the environment, the country-specific rules have to be respected.
Power supply Only use the original power supply and cables which are included in the delivery by Reinecker Vision GmbH. Caution: The use of any other equipment might lead to an increased electromagnetic emission and to a product damage.

Safety instructions to avoid damage
Please respect the following instructions for your own safety:
1. Do not plug the AC adapter into a faulty electrical outlet. Doing so may cause electrical shock or fire.
2. Do not touch the AC adapter with wet hands.
3. Only use the original power supply and cables which are included in the delivery by Reinecker Vision GmbH. The use of any other equipment might lead to a product damage.
4. For mezzos with battery operation only: Only use the original battery, which is included in the delivery by Reinecker Vision GmbH. The use of any other equipment might lead to a product damage.
5. Do not expose the system to direct sunlight or to very hot or cold environment, as this would harm the picture quality.
6. Do not operate this device below +5°C or above +40°C.
7. No liquids must reach the interior of the system. Only operate the device in a dry environment.
8. The device may not be operated next to medical devices (patients environment).
9. Do not lean on the screen, touch the screen with any object or lay heavy objects on the device. This may cause damage to the device.
10. Do not try to repair or to dismantle the system by your own. This would automatically void the warranty. If you need any technical assistance please get in contact with the local distributor or with Reinecker Vision GmbH.
11. Always switch OFF the system and disconnect it from the power supply before cleaning it. Only use a soft and slightly damped cloth. Only use a mild household detergent. Do not use alcohol containing or strong detergents.

II. Instructions for the reading system mezzo EDU

Delivery content
Reading system mezzo EDU, 16" monitor Carrying bag (Space for mezzo EDU 16") Power adapter 12V DC / 5000mA Adapter cable (country-specific) User manual Service information

MEZEDU01 MEZVARTA

Accessories
XY-table mezzo with friction brake XY-table mobile

ZBXTFIX0 ZBMEZZXT

Cameras
mezzo EDU is equipped with the following camera types:

Focus camera: FullHD camera with digital zoom and comfort auto-focus

Magnification from approx. 2,1 to 24x* (at monitor 16 class)
*factory settings, extended magnification range adjustable in the menu

- Technology: high quality pictures with virtually no picture noise

Distance camera: FullHD+ camera with optical and digital zoom

Starting with mezzo EDU
Mains operation
For mains operation, make sure that the enclosed power supply unit is connected to the power supply and to the power supply socket (12 VDC) of the reading system.
Power ON
Press the ON/OFF button to switch ON the device. When the mezzo and the base plate is illuminated, you can put a page or an object onto the table. All the possible settings for example zoom, colour or brightness can be adjusted individually.

Power OFF
Switch OFF the device by pressing the ON/OFF button.
Automatic saving of device settings
All latest used settings of the device will remain active, when switching ON the device again.
Replacement of lighting
The electronic magnifier is equipped with a high power LED Illumination. If replacement of the lamp is required it should only be done by a specialist or by Reinecker Vision GmbH.
Important note to the use of power supply
Please only use the power supply included in the delivery. Use of any other power supply will void the warranty!
Installation of the system
Unpack your mezzo EDU carefully and place it on a solid horizontal surface. If you have not purchased an optionally available stand that fits to the product you must provide a solid surface for the system with sufficient surface area. Set up your mezzo EDU as described below:
Interlock release
Folded mezzo EDU for transport.
11

Operation buttons on the base plate

AC input

Bring the camera/monitor arm in the upright position until the interlock release snaps in.

Distance camera

Camera (internal)

LED light
Move the monitor upwards.
Alignment of monitor
Due to the monitor's technology contrast and brightness change depending on the angle of view. The highly flexible monitor arm enables you to adjust the monitors height and angle according to your best ergonomic position.

Control bar

Bring the distance camera up until the sub-contruction of the distance camera is held by the magnet.

I 0 II

Connection of the unit
Connect the power supply to a mains wall socket and plug the adapter end of the cable into the AC input socket (12V DC) located on the base plate of the mezzo EDU. Note: The supplied plug-in power supply is exclusively for the operation of this device. Please do not use any other power adaptor or cable. Once the device is plugged in, it is ready to use.
AC input
ON OFF
Adapter cable
Mains wall socket
Description of the control elements Power switch ON/OFF
Only after connecting mezzo successfully to the power supply, the device
ON
can be switched ON or OFF using the toggle switch. After switching ON, OFF the green power LED above the toggle switch lights up.
When the device will be turned OFF, the latest used settings are saved automatically. When switching ON again, the latest used settings are recalled. Attentions!: If the base plate is not lit up after switching ON the device, please check, if the LED-light is ON (please see next paragraph).
Light adjustment (50% / OFF / 100%)
Press the toggle switch to adjust the LED lighting accordingly: I = LED-light min. 50% 0 = LED-light OFF II = LED-light max. 100%
General note on using the LED-light
While using the device, it could be helpful to switch OFF or reduce the LED-light of the device, for example, when the light in the room or from outside changes (sunlight).
14

Description of the control bar

1) Switching button distance mode/document mode, Menu settings ON/OFF 2) Brightness 3) Color selection 4) Zoom OUT 5) Zoom IN 6) Auto focus ON /OFF 7) Line marker / Shadowing /Auto-Exposure ON/OFF (autom. aperture control) 8) 5 -Button-Control (distance camera control)
Switching button distance mode / document mode
By briefly pressing the control key, you can switch from document mode (internal camera) to distance mode or vice versa.
Menu settings ON /OFF
Press the control button (in distance or document mode) for approx. 5 seconds to access the respective menu settings of the active camera. In document mode (internal camera) you will access the menu of the internal camera. In distance viewing mode, you will access the menu of the distance camera.
If you want to leave the menu settings, confirm the menu item ,,Exit" or hold the control button pressed until the menu window disappears from the screen.
Brightness
Use the ,,plus / minus button" to adjust the brightness (light intensity) of the image shown on the monitor.
Plus-Button: Increase brightness Minus-Button: Reduce brightness

Color settings
By briefly pressing the color selection button, the following colors can be selected by default: Position 1: full color display Position 2: black font, white background Position 3: white font, black background Position 4: green font, black background Position 5: yellow font, black background Position 6: yellow font, blue background The chosen color mode appears temporarily on the lower side of the screen (when activated). Note: Individual color combinations can be defined via the internal menu. You also have the possibility to reduce the number of color combinations.
Zoom OUT
By briefly pressing the control button, the screen view is gradually reduced. When the control button is pressed continuously, the screen view is continuously reduced.
Zoom IN
By briefly pressing the control button, the screen view is gradually enlarged. When the control button is pressed continuously, the screen view is continuously enlarged.
Auto focus ON /OFF
By briefly pressing and releasing the central ("zoom") button the autofocus can be activated/deactivated. By having the auto-focus activated, the camera adjusts the picture sharpness automatically.
Line marker / Shadowing / Auto-Exposure ON / OFF
Repeated pressing of the control buttons gives you the following options: 1) Line marker/Shadowing horizontal* 2) Line marker/Shadowing vertical 3) Line marker/Shadowing deactivation *In distance mode, only the horizontal line marker can be activated.
16

Auto-Exposure ON/OFF (autom. aperture control)
When the control button is pressed permanently, the automatic aperture control (auto-exposure) in the distance camera is switched ON or OFF.
Auto-Exposure ON: The brightness of the camera image is automatically adopted according to the lighting conditions.
Auto-Exposure OFF: The brightness of the camera image is no longer automatically adopted to the lighting conditions.
Line marker/Shadowing horizontal
Use the ,,plus" button to move the line marker upwards. Use the ,,minus" button to move the line marker down. As soon as the line marker passes the lower edge of the screen, the shadowing will appear from above and below (symmetrical).
Line marker/Shadowing vertical
Use the ,,plus" button to move the line marker to the left. Use the ,,minus" button to move the line marker to the right. As soon as the line marker passes the lower edge of the screen, the shadowing will appear from the left and the right (symmetrical).
5-button control panel (distance camera control)
The 5-button control panel allows you to do the following actions and settings.

Navigation of the distance camera
The distance camera can be moved to the desired position by pressing the ,,arrow buttons".
When moving, a crosshair will be shown at the center
of the screen. The crosshair is an indication of where Left
the camera is pointing and is focussed.
(The crosshair can be turned off in the menu.)

Up Down

Right

Saving the position of the distance camera
The distance camera is made to save up to 4 different positions.

Alternative 1:

Briefly press the yellow control button to activate the

saving process. Then press and hold the desired position

button (Pos. 1-4) until the selected memory position briefly

appears on the screen. Alternative 2:

Pos. 4

Press the yellow control button in equal intervals one

after the other until you have reached the desired memory

position. In this position, press and hold it. (Pos. 1-4).

Pos. 1 Pos. 3

Pos. 2

Recall saved Positions

Alternative 1: Press the yellow control button quickly one after the other and release it at the desired memory position (Pos. 1-4). The distance camera then moves to the saved camera position.
Alternative 2:

Pos. 4

First press the yellow control button briefly and then quickly press the desired position button (Pos. 1-4).
The distance camera then moves to the saved camera position.

Pos. 1 Pos. 3

Pos. 2

Function ,,Last position"
Press the yellow control button briefly to switch between the two last selected saved positions.
The message of the selected saved position appears briefly on the screen.

Menu settings mezzo EDU
Opening the menu
Press the control button for approx. 5 seconds until the menu window appears on the screen.

Main Menu Color saturation Language AF Modus Min. Magnification Max. Magnification Mains Frequency Monitor Brightness Reset to Factory Settings... Advanced Settings... Exit

+50 English
auto Standard Standard
50Hz 80%

Select menu options
Use the up/down arrow buttons to move the cursor to the option you like to change.

Change menu options and confirm
Confirm the selected option with the ,,Auto focus" button. Then change the value with the arrow keys ,,up / down". Then confirm the entry with the ,,Auto focus" control button.

Menu options

Main Menu Color saturation Language
AF mode Min. Magnification Max. Magnification Mains Frequency Monitor Brightness Reset to Factory Settings...
Advanced Settings...
Exit

Overview:

Advanced Settings Color Combination Setup... Color Ruler... Mask Transparency OSD Messages Reflection Filter Save User Settings Recall User Setting Change factory Setup... Return

Main Menu Advanced Settings Color Combination Setup... Color Combinations 1-6 Mode
Foreground
Background
Swap Fore-/Background
Exit 20

Main Menu Advanced Settings Color Combination Setup User colours User colour 1 - Red User colour 1 - Green User colour 1 - Blue User colour 2 - Red User colour 2 - Green User colour 2 - Blue Return
Main Menu Ruler/Mask Settings Color Ruler Red Green Blue Return
Main Menu Advanced Settings Mask Transperancy OSD Messages Anti Reflecion Mode Save user Settings
Recall User Settings
Recall factory settings... Return

Adjustment range from 0 to 31 Adjustment range from 0 to 31 Adjustment range from 0 to 31 Adjustment range from 0 to 31 Adjustment range from 0 to 31 Adjustment range from 0 to 31
Adjustment range from 0 to 31 Adjustment range from 0 to 31 Adjustment range from 0 to 31
50% | 25% | 0% ON | OFF ON | OFF Press button ,,Auto-focus" to save the user settings Press button ,,Auto-focus" to recall the saved user settings Access only by authorized service

Menu settings distance camera
Opening menu
Press the control button for approx. 5 sec. until the menu window appears on the screen.

Extended Menu Image Settings... Color Settings... Preset Settings... OSD-Messages Language User Menu... Exit

ON English

Select options
Use the up/down arrow buttons to move the cursor to the option you like to change.

Change menu option and confirm
Confirm the selected option with the ,,Auto-focus" button. Then change the value with the arrow keys ,,up/down". Then confirm the entry with the ,,Auto-focus" control button.
Change menu option
Alternatively, you can change the selected option directly with the ,,Line marker/shadowing" control button.

Menu options
Extended Menu Image Settings... Image Rotation Detail enhancement Max. Digital Zoom False

0° | +90° | 180° | -90° Adjustment range from 0 to 24 OFF | Adjustment range from 1,5x to 15,0x

Max. Digital Zoom Real RHC

AF Return

Continuous | Semi-automatic | Semi-autom. + Zoom | Continuous / Zoom

Extended Menu Color settings... White Balance Mode
Gain Red Gain Blud Perform Semi-autom. WB Color saturation Background Color Foreground Color Mode Return
Extended Menu Preset Settings Function 1
Function 2
Function 3
Restore Default Settings
Use Alternative Settings
Return
Extended Menu OSD Messages Languages
User menu...
Exit

Overview:
Main Menu Brightness Contrast Color Saturation Ruler/Mask Return Main Menu Ruler/Mask Ruler/Mask Ruler position Mask position Ruler Mode

Main Menu Brightness Contrast Color Saturation Ruler/Mask... Ruler/Mask Settings... AF Mode Reset to factory settings Recall User Settings Advanced Settings.... Exit

+50 +50 - 30 Aus
Continous

Adjustment range from -50 to +50
Adjustment range from -50 to +50
Adjustment range from -50 to +50
OFF | Line marker and shadowing disabled Ruler | Line marker active Mask | Shadowing active

Main Menu Ruler/Mask Settings Mask Mode
Mask Transparency Return Main Menu Ruler/Mask Ruler Color Red Green Blue Return Main Menu AF Mode Reset to factory settings Reset to User Settings Advanced Settings Exit

Left/Right | Shadowing left/right; Shadowing covers max. 50% Top/Bottom | Shadowing top/bottom; Shadowing covers max. 50% Left/Right FS | Shadowing left/right; Shadowing covers max. 90% Top/Bottom FS | Shadowing top/bottom; Shadowing covers max. 90% Full-Screen | Shadowing covers all of the monitor 50% | 25% | 0%
Adjustment range from 0 to 31 Adjustment range from 0 to 31 Adjustment range from 0 to 31
Continuous | Semi-automatic | Semi-autom. + Zoom | Continuous / Zoom Confirm selection to the reset to factory settings Confirm selection to the reset to user settings Confirm selection to go to advanced settings (see overview)

Overview:

Advanced Settings Color Combination Setup Anti Reflection Mode Monitor Brightness Language Perform White Balance White Balance Mode Sharpness Settings... OSD Messages Special Settings... Return

OFF 100 English
Autom.
ON

Advanced Settings Color Combination Setup Color Combinations 1-6 Mode Foreground
Background
Swap Fore-/Background Return
Advanced Settings Color Combination Setup User Colors User Color 1 - Red User Color 1 - Green User Color 1 - Blue User Color 2 - Red User Color 2 - Green User Color 2 - Blue Return

Advanced Settings Anti Reflection Mode Monitor Brightness Language Perform White Balance White Balance Mode
Advanced Settings Sharpness Settings Real Color Sharpness False Color Sharpness Return
Advanced Settings OSD Messages Special Settings...
Zurück
Overview:

Adjustment range from 0 to 24 Adjustment range from 0 to 24

ON | OFF
Confirm selection to go to special settings (see overview)

Special Settings Zoom Extension Max. Digital Zoom Customize Buttons... Store User Settings Recall User Settings... Reset to Factory Settings... Expert Settings... Monitor Size Room Camera Settings... Zoom Extension Return

Ein 3.5x
Auto

Special Settings Zoom Extension Max. Digital Zoom
Special Settings Customize Buttons... Up Down Left Right Center*
(Go to second level)
2nd.+Up 2nd.+Down 2nd.+Left 2nd.+Right Return
Special Settings Store User Settings Recall User Settings Reset to Factory Settings Expert Settings Monitor Size Room Camera Settings...
Return

Overview:

Room camera settings

Crosshair

Speed Left

Speed Right

Speed Up/Down

Zoom Dependance

110

Speed Blackb. Scan

Line Height Blackb. Scan

Reinitialize head...

Return

Room camera settings Crosshair Speed Left Speed Right Speed Up/Down Zoom dependance Speed Blackb. Scan Line Height Blackb. Scan Reinitialize Head... Return

OFF | ON Adjustment range from 1 to 100 Adjustment range from 1 to 100 Adjustment range from 1 to 100 Adjustment range from 0 to 150 Adjustment range from 1 to 99 Adjustment range from 1 to 99 Confirm selection to initialize distance camera

Troubleshooting

Problem
No image is shown.
Screen is dark.

Solution
Check the mains connection, the cable connection to the monitor and that all relevant systems are switched ON or activated. Check the brightness and contrast settings of the camera/monitor.

True color is not displayed Check your reading material, color mode setting,

correctly.

brightness, color saturation and camera lighting.

Battery does not charge or battery charging indicator does not light.

Check that the power supply is correctly connected to the mains socket and that the adapter cable is correctly connected to the mezzo EDU.

Technical details

mezzo EDU
16"-class monitor

LED flat screen monitor
16"-class monitor | ca. 41 cm (1366 x 768 pixel)

Weight: approx. 6,5 kg
Measurements (WxHxL) expanded: approx. 38 x 50 x 52 cm
folded: ca. 31 x 19 x 51 cm

Color mode Autofokus

True colors, preset and individually adjustable artificial colour modes
Can be switched OFF

Warranty Information
1. Reinecker Vision GmbH grants a warranty of 24 months (warranty period only valid within the European Union) against defects in manufacture counted from date of invoice ex Reinecker Vision GmbH.
2. All parts that have been replaced when repairing the unit will automatically become property of Reinecker Vision GmbH.
3. Damage caused by improper use or by non-compliance with the operating instructions will result in the invalidation of the warranty.
4. Interventions from persons other than Reinecker Vision GmbH authorised specialists may lead to invalidity of warranty.
5. Partial warranty is valid for light sources serving to illuminate the reading object, batteries and other parts subject to wear and tear.
6. If a warranty claim is necessary, the system has to be returned to the manufacturer in Alsbach-Hähnlein or to your authorized dealer in the original packaging including all components. The manufacturer does not carry the cost for transport, packaging and insurance.
Phone number: +49 6257 93110
View our General Terms and Conditions.
Your authorized distributor:

Notes

Type:

mezzo EDU (MEZEDU01)

Serial number:

Manufacturer:

Reinecker Vision GmbH

Final examination:

Power supply:

100 VAC 240 VAC 50-60 Hz

With plug-in power supply: 12V DC / 5000mA

Power consumption:

max. 80 watt

Reinecker Vision GmbH International Contact
sales department, customer relations: Sandwiesenstraße 19 D-64665 Alsbach-Hähnlein
customer service: Erlenweg 3 DE-64665 Alsbach-Hähnlein
Tel.: +49 6257 93 11- 0 Fax: +49 6257 93 11- 8008
Email: international@reineckervision.de www.reineckervision.de

In case service is necessary, please contact your authorized distributor.

Reinecker Vision GmbH Zentrale Vertrieb, Kundenberatung: Sandwiesenstraße 19 64665 Alsbach-Hähnlein Kundendienst: Erlenweg 3 64665 Alsbach-Hähnlein Tel.: +49 6257 9311- 0 Fax: +49 6257 9311- 8230 Email: info@reineckervision.de www.reineckervision.com
Version 1.1, Stand 01/21, Art.-Nr. 000 10 373 Subject to change.

Bitte wenden Sie sich bei Fragen oder einem Servicefall direkt an unser Hauptwerk in Alsbach-Hähnlein oder an eine unserer Niederlassungen.
Bei im Ausland erworbenen Produkten kontaktieren Sie im Servicefall bitte Ihren dort ansässigen Händler.

References

Adobe PDF Library 15.0 Adobe InDesign 16.1 (Windows)