About the Dell PowerEdge R930
The Dell PowerEdge R930 is a powerful rack server designed to support up to four Intel E7-8800/4800 v3 or v4 processors. It features eight memory risers, each capable of holding 12 DIMMs, and can accommodate up to 24 hard drives or SSDs, offering substantial storage and processing capabilities.
Key Features and Components
This manual provides detailed information on the server's front and back panel features, including:
- Front panel components such as the power button, NMI button, USB ports, and hard drive bays.
- Back panel components including power supply sockets, iDRAC media, NIC ports, and USB/VGA ports.
- Diagnostic indicators and their meanings.
- Detailed technical specifications covering dimensions, weight, processors, memory, storage, and environmental factors.
System Setup and Configuration
Guidance is provided for initial system setup and configuration, including:
- Setting up the iDRAC IP address and installing the operating system.
- Methods for downloading firmware and drivers.
- Pre-operating system management applications and system setup utilities.
Installation and Maintenance
The manual offers comprehensive instructions for installing and removing various system components, such as:
- System memory modules and risers.
- Cooling fans and heat sinks.
- Hard drives and optical drives.
- Expansion cards and risers.
- Internal storage controllers and system boards.
Troubleshooting and Support
For any issues encountered, the document includes a detailed troubleshooting section covering common problems related to system startup, power, cooling, memory, storage, and network connectivity. It also provides information on how to get help from Dell support.
For more detailed information and support, visit the Dell support website at www.dell.com.
