Type of Change
- Electrical Specification
- Mechanical Specification
- Firmware Specification
- Regulatory of Compliance
- Packaging Specification [Selected]
- End of Life
- Other
Affected Part Numbers
| Part Number | Name |
|---|---|
| 102010328 | Seeed Studio XIAO SAMD21 |
| 102010428 | Seeed Studio XIAO RP2040 |
| 102010448 | Seeed Studio XIAO nRF52840 |
| 102010672 | Seeed Studio XIAO nRF52840 Plus |
| 102010469 | Seeed Studio XIAO nRF52840 Sense |
| 102010694 | Seeed Studio XIAO nRF52840 Sense Plus |
| 113991054 | Seeed Studio XIAO ESP32C3 |
| 113991114 | Seeed Studio XIAO ESP32S3 |
| 102010671 | Seeed Studio XIAO ESP32S3 Plus |
| 113991254 | Seeed Studio XIAO ESP32C6 |
| 102010550 | Seeed Studio XIAO RP2350 |
| 102010551 | Seeed Studio XIAO RA4M1 |
| 102010590 | Seeed Studio XIAO MG24 |
| 102010610 | Seeed Studio XIAO MG24 Sense |
| 102010388 | Seeed Studio XIAO SAMD21 (Pre-Soldered) |
| 102010630 | Seeed Studio XIAO RP2040 (Pre-Soldered) |
| 102010631 | Seeed Studio XIAO nRF52840 (Pre-Soldered) |
| 102010632 | Seeed Studio XIAO nRF52840 Sense (Pre-Soldered) |
| 102010633 | Seeed Studio XIAO ESP32C3 (Pre-Soldered) |
| 102010634 | Seeed Studio XIAO ESP32S3 (Pre-Soldered) |
| 102010636 | Seeed Studio XIAO ESP32C6 (Pre-Soldered) |
| 102010637 | Seeed Studio XIAO RP2350 (Pre-Soldered) |
| 102010638 | Seeed Studio XIAO RA4M1 (Pre-Soldered) |
| 102010690 | Seeed Studio XIAO MG24 (Pre-Soldered) |
| 102010691 | Seeed Studio XIAO MG24 Sense (Pre-Soldered) |
| 113991115 | Seeed Studio XIAO ESP32S3 Sense |
| 102010635 | Seeed Studio XIAO ESP32S3 Sense (Pre-Soldered) |
Change Description
1. The PartList within all modules has remained unchanged.
2. A new PV plastic white waterproof shell has been added.
3. Anti-static foam has been added to protect each module.
4. A circular card containing certification information compliant with EU standards and a QR code for Xiao's introduction page has been included.
Old Packaging
Modules were previously packaged in a plastic bag.
New Packaging
Modules are now packaged in a small, white, screw-top plastic container with a clear lid. This container includes protective anti-static foam and a circular card with certification information and a QR code.
Reasons for Change
- The XIAO packaging is designed for reuse beyond candy wrapping, including but not limited to waterproof storage and project applications, providing added value to users.
- Featuring integrated anti-static protection during transportation, the packaging ensures enhanced protection against external damage.
- The packaging incorporates concealed compartments for accessories such as antennas, pin headers, and heat sinks, achieving an integrated design with enhanced aesthetics.
Customer Action Required
Switch to alternative products.
