Datalogic Custom Prefix and Suffix Instructions
Programming codes for setting custom prefixes and suffixes on Datalogic barcode scanners.
Supported Products
- Gryphon™ GD4100
- Gryphon™ GM4100
- Gryphon™ GBT4100
- Gryphon™ GD4300
- Quickscan™ QD2100
- Quickscan™ QW2100
- PowerScan™ PD7100
- PowerScan™ PBT7100
- Touch™ TD1100
Programming Overview
This document provides instructions to program up to 20 characters as a prefix (header) or suffix (terminator) for barcode data. Characters can be from the ASCII set or represented by HEX values (00-FF).
- Scan the 'Enter/Exit' barcode to enter programming mode.
- Scan the 'Set Prefix' barcode to begin prefix programming.
- Scan the 'Set Suffix' barcode to begin suffix programming.
- Select the desired character(s) for the prefix/suffix from the provided table.
- Use the corresponding HEX codes to set the desired Prefix/Suffix values.
- Scan the 'End' barcode to terminate the string.
- Scan the 'Enter/Exit' barcode again to exit programming mode.
Character Mapping Table
The following table details the ASCII characters and their corresponding programming codes (HEX values and control sequences) for setting prefixes and suffixes.
| Row | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | E | F |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | NULL | SOH | STX | ETX | EOT | ENQ | ACK | BEL | BS | TAB | LF | VT | FF | CR | SO | SI |
| 1 | DLE | DC1 | DC2 | DC3 | DC4 | NAK | SYN | ETB | CAN | EM | SUB | ESC | FS | GS | RS | US |
| 2 | C(S)+@ | C(S)+A | C(S)+B | C(S)+C | C(S)+D | C(S)+E | C(S)+F | C(S)+G | C(S)+H | C(S)+I | C(S)+J | C(S)+K | C(S)+L | Enter | C(S)+N | C(S)+O |
| 3 | C(S)+P | C(S)+Q | C(S)+R | C(S)+S | C(S)+T | C(S)+U | C(S)+V | C(S)+W | C(S)+X | C(S)+Y | C(S)+Z | Esc | C+\ | C+] | C+_ | C+ |
| 4 | SP | ! | " | # | $ | % | & | ' | ( | ) | * | + | , | - | . | / |
| 5 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | : | ; | < | = | > | ? |
| 6 | @ | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O |
| 7 | P | Q | R | S | T | U | V | W | X | Y | Z | [ | \ | ] | ^ | _ |
| 8 | ` | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o |
| 9 | p | q | r | s | t | u | v | w | x | y | z | { | | | } | ~ | Del |
| A | Ent | Sh↓ | Sh↑ | Ins | (keyp) | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 |
| B | F12 | Home | End | PgUp | Pg Dwn | ↑ | ↓ | ← | → | Ar↓ | Ar↑ | Al↓ | Al↑ | C1↓ | C1↑ | Cr |
| C | Cr↑ | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | : | ; | < | = | > |
| D | ? | @ | A | B | C | D | E | F | G | H | I | J | K | L | M | N |
| E | O | P | Q | R | S | T | U | V | W | X | Y | Z | [ | \ | ] | ^ |
| F | _ | ` | a | b | c | d | e | f | g | h | i | j | k | l | m | n |
Special Function Codes
- End: To terminate the string.
- Enter/Exit: To exit programming.
Datalogic has taken reasonable measures to provide information in this Programming Aid that is complete and accurate. However, Datalogic reserves the right to change any specification at any time without prior notice. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Datalogic Scanning Inc. is under license. © 2010-2013 Datalogic ADC, Inc. All rights reserved. Protected to the fullest extent under U.S. and international laws. Copying, or altering of this document is prohibited without express written consent from Datalogic ADC. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. 3GL, Datalogic Aladdin, Datalogic STAR Cordless System, and Touch are trademarks of Datalogic ADC S.r.l. The Elf logo and Joya are registered trademark of Datalogic Mobile S.r.l. in the E.U. Elf, Kyman, Kyman-Gun, Memor, Pal, R-Series, Rhino, Skorpio, and Skorpio-Gun are trademarks of Datalogic Mobile S.r.l. Falcon, the Falcon logo, Magellan, PowerScan, and Quick Scan are registered trademarks of Datalogic ADC. in many countries, including the U.S.A. and the E.U. All Weighs, FirstStrike, Heron, Gryphon, PreScan, and SurroundScan, are registered trademarks of Datalogic ADC. and Cashier Training, illumix, Lynx, Motionix, Produce Rail, Productivity Reporting, ScaleSentry, and SmartSentry are trademarks of Datalogic ADC. All other brand and product names are trademarks of their respective owners. Product specifications are subject to change without notice.
