Anko Bluetooth® Gaming Controller
Instruction Manual
K: 43499748 | T: 70363609 (Model: JLR-79884-P)
Cautions
- Before use, please read this manual carefully and be familiar with the operation and adjustment.
- Products cannot be disassembled privately.
- Products are strictly prohibited in fire, water, lest appear explosion.
- This gaming controller is for Switch/Switch Lite/Switch OLED, and supporting PC x-input/steam (part of the native support handle games) ONLY.
Product Overview
The bluetooth gamepad is a high-quality wireless game handle with TURBO and good auxiliary functions, which makes your experience more accurate and true. The fully functional and ergonomic design of this handle ensures precision, stability, and comfort of use.
Button Instructions
This game controller is composed of 19 function buttons (upper, lower, left, right, A, B, X, Y, L, ZL, R, ZR, L3, R3, -, +, TURBO, Home, Screen capture) and 2 simulated 3D joysticks.
Product Specifications
- Input voltage: DC 5V 300mA
- Charging time: 2-3h
- Battery capacity: 400mAh
- Cable Length: 1m
Pairing and Connecting
Switch/Switch Lite/Switch OLED Pairing:
- Open the host, click the settings button to close the airplane mode, and open the wireless switch.
- Into the host wireless pairing mode, click the controllers button on the home page to change the grip/order.
- Press and hold the HOME [Home] button for 3 seconds until the handle channel light LED1-4 running display (LED1-LED4-LED1) changes from slow to fast and enters wireless pairing mode.
Connection Back Mode
Handle and the host have been connected once to be remembered. When the host is in the power-on state, pressing the HOME [Home] button will automatically connect to the host, which is a key back to connect.
PC Connection Mode
This handle supports Windows x-input class computer games.
Wired connection:
PC X-input corresponding to the part of the game can be operated by the wired handle's connection to PC by USB.
- Connect to PC at the 'Off' condition.
- Press and hold down the "-" and "+" keys at the same time for 3 seconds to switch to the X-input mode. LED2 will turn on and save the Setting.
- LED 2 light on in PC X-input mode, always on when fully charged, LED blinking in charging status. Windows will automatically install the driver.
Steam platform:
After connecting to PC, open Steam. It will be automatically recognized to steam mode, LED1 light on.
TURBO Function
- The first time, press and hold the button you need to set the burst and then press TURBO [TURBO ⚡]. It will be a semi-automatic burst. The second operation will enter the fully automatic burst function, and the third operation will cancel the burst.
- Turbo key assignable function: A, B, X, Y, L, ZL, R, ZR.
- Adjust the burst speed:
- When holding down the Turbo key and pushing the right stick up, change the burst speed in the following order: 5 times/sec → 12 times/sec → 20 times/sec.
- When holding down the Turbo key and pushing the right stick down, change the burst speed in the following order: 20 times/sec → 12 times/sec → 5 times/sec.
- The default initial speed is 12 times/sec.
Motor Vibration Function
A total of 4 vibration intensity: 100%, 70%, 30%, 0%. You can open, close, or adjust the intensity manually. The default initialization file is 100%:
- When holding down the Turbo key and pushing the left stick up, the intensity is increased by one step.
- When holding down the Turbo key and pushing the left stick down, the intensity is reduced by one step.
How to reset
If your controller is not paired, does not respond, or shows a flashing light, you need to reset the handle. Only need a tool like the pin for retrieving card, press the reset button on the built-in; the handle will reset to factory settings.
Power off/Charging/Alarm for low battery
| Status | Description |
|---|---|
| Power off | To shut down the controller, please press HOME [Home] button for 5 seconds, until the indicator light to go out. When the controller is in a state of pairing, if failed to connect more than 60 seconds, it will automatically shut down, but don't sleep for automatic TURBO activity. When the controller is connected to the host, if more than five minutes without action, the handle will be closed and into the sleep mode. |
| Charging | When the controller is not connected to the host, the LED indicator flashes when the controller is charging; when it is full, the indicator goes off. In the case of connected host, the LED indicator of the currently connected mode channel flashes when the handle is charging; when it is full, the indicator goes out. |
| Alarm for low battery | When the LED1 indicator keeps shining, which shows that the handle is about to run out of power and needs to charge. |
Six Axis Calibration
Decreasing Key +HOME [Home]: Under the dormancy condition, firstly press the minus key and remains still, and press the HOME [Home] into calibration (The handle indicator flashes left and right). Put the controller in a horizontal position, then press the '+' button and release it to start the handle calibration. The controller starts to calibrate. When calibration is complete, all 4 LEDs light up for about 3 seconds and automatically go to sleep.
Package
12 Month Warranty
Thank you for your purchase. Your new product is warrantied to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.
For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.
Anko will provide you with your choice of a refund, repair (where possible) or exchange (availability dependent) for this product if it becomes defective within the warranty period. The business will bear the reasonable expense of claiming the warranty.
This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer Service Centre as listed below, for the entity you purchased this product from, for any difficulties with your product. Warranty claims and claims for expense incurred in returning this product can be addressed to the respective Customer Service Centre.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Contact for Kmart purchases
Kmart Australia Ltd.
C/- Customer Service Centre
690 Springvale Road,
Mulgrave Vic 3170
Customer Service: 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or via Customer Help at kmart.com.au
Contact for Target purchases
Target Australia Pty Ltd
C/- Customer Service Centre
2 Kendall Street, Williams Landing, Vic, 3027
Customer Service: 1300 753 567 or via Customer Help at target.com.au/help/contact-us
