VEVOR Frame Gate Building Kit User Manual

Product Overview

This manual provides instructions for the VEVOR Frame Gate Building Kit. VEVOR is committed to offering tools at competitive prices. The "Save Half" or "Half Price" claims represent an estimate of savings compared to major brands and may not apply to all product categories.

The kit is designed for building frame gates and is suitable for various applications such as garden doors, driveway gates, corral doors, barn doors, and sundry doors. The assembled door can support its own weight but should not be used to support people or heavy objects.

Note: The actual product received may differ in appearance. Please read all instructions carefully before operation.

Important Safety Instructions

• ⚠️ To reduce the risk of injury, read the instructions manual carefully.
• ? Wear ear protectors when using this product.
• ? Wear eye protectors when using this product.
• ? Wear dust masks when using this product.
• ? Wear gloves when using this product.

WARNING!

1. Please read the instructions carefully.
2. After receiving the goods, check if all accessories are complete.
3. Products can be applied to small shed doors, garden doors, driveway doors, corral doors, barn doors, sundry doors, etc.
4. The assembled door can only bear its own weight and cannot support people or heavy objects.

Product Description

Garden doors, fences, etc., are often made of wood and are exposed to outdoor elements like sun and rain, which can cause aging, sagging, or shaking. This frame gate building kit provides door frame support to repair wooden doors and extend their service life.

Product Structure

The gate structure includes:

• T-shaped inner brackets (upper left and upper right)
• Lock group (including latch-latch lever, wire drawing rope, and lock seat)
• Various T-shaped brackets

Attachment Components:

• F: Latch-latch lever (1 Pcs)
• A: M5*50 countersunk self-tapping screws (38 Pcs)
• G: Lock seat (1 Pcs)
• B: M5*32 round head self-tapping screws (6 Pcs)
• C: Upper left T-shaped bracket (1 Pcs)
• D: Lower left T-shaped bracket (1 Pcs)
• E: Right T-bracket (2 Pcs)

Installation Tools:

• Level ruler
• Drill
• Measuring tape

Diagram Description: A visual representation of the gate structure showing the placement of brackets and the lock group.

Installation Procedures

1. Step 1: Install T-bracket on the top right.
2. Step 2: Install the T-shaped bracket on the lower right.
3. Step 3: Install T-bracket on the top left.
4. Step 4: Install T-shaped bracket on the lower left.
5. Step 5: Prepare the gate panels, identifying the top and lower hinges.
6. Step 6: Press the hinges into place.
7. Step 7: Press down on the hinges.
8. Step 8: Install the lock group using screws (B).
9. Step 9: The completed two-piece gate set is shown.

Diagram descriptions for each step illustrate the assembly process using the components and tools mentioned.

Parameter

Manufacturer and Representative Information

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

EC REP: E-CrossStu GmbH, Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED, C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730