IKEA KURA Bed Tent
Assembly Instructions
Safety Information
WARNING! KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
This tent is made with flame resistant fabric which meets CPAI-84 specifications. It is not fire proof. The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the tent fabric may render the flame resistant properties ineffective.
Do not use candles, matches, or open flames of any kind in or near a tent.
Français: MISE EN GARDE! TENIR LE MATÉRIAU DE CETTE TENTE ÉLOIGNÉ DE TOUTE FLAMME ET DE TOUTE SOURCE DE CHALEUR. Cette tente est fabriquée d'un tissu résistant au feu qui répond aux exigences de la norme CPAI 84, mais qui n'est pas ininflammable. Ce tissu brûlera s'il est laissé en contact continu avec une source d'inflammation. L'application d'une substance étrangère à la tente peut rendre inefficace le traitement retardateur de flamme du tissu. Ne jamais utiliser de bougies, d'allumettes, ni aucun autre flamme nue à l'intérieur ou à la proximité de la tente.
Español: ¡ADVERTENCIA! MANTÉN ALEJADO DE CUALQUIER TIPO DE LLAMA Y FUENTE DE CALOR EL MATERIAL DE ESTA TIENDA. Esta carpa está hecha de tejido de combustión lenta que cumple las especificaciones CPAI-84. No es resistente al fuego. Si se deja en contacto continuo con cualquier tipo de llama o fuego, la tienda se quemará. Si se aplica cualquier clase de sustancia extraña al tejido de la carpa, restará eficacia a sus características de combustión lenta. Evita encender velas, cerillas/fósforos o fuego cerca de una tienda o carpa.
Recommended for ages 6+.
Assembly Steps
The assembly involves attaching the tent fabric to a bed frame. The process requires poles and clips.
Step 1
Lay out the tent fabric flat. Insert poles through designated sleeves. Secure the fabric using clips.
Details:
- Use 3x poles for the initial setup.
- Use 6x clips to secure the fabric to the poles.
Diagram Description: A person is shown laying out the tent fabric and inserting poles. Close-up views show how to attach the fabric to the poles using clips.
Step 2
Continue inserting poles and securing the fabric.
Details:
- Use 1x pole.
- Use 1x clip and 1x hook-and-loop fastener to secure the fabric.
Diagram Description: Similar to Step 1, showing further pole insertion and fabric securing with close-ups of the attachment points.
Step 3
Attach the tent to the bed frame.
Details:
- Use 6x clips to attach the tent to the bed frame.
- Use 4x clips to secure the tent to the bed frame.
Diagram Description: The tent is shown being attached to a bed frame. Close-up views illustrate the clipping mechanism used to secure the tent to the frame. An 'X' symbol indicates an incorrect attachment method.
