SMART WIFI CAMERA

Product Overview

Thank you for choosing the DELTACO Smart WiFi Camera. This device offers smart home security features and can be controlled via the Deltaco smart home app.

Product Components

The camera includes the following components:

• 1. Speaker
• 2. Passive infrared sensor
• 3. Camera lens
• 4. LED indicator
• 5. Reset button
• 6. Light sensor
• 7. USB-C charge port
• 8. LED (charge status)
• 9. Microphone
• 10. MicroSD slot

Getting Started

Powering On/Off

To power the camera on or off, press and hold the button for 3 seconds. ?

Mounting

This product comes with two different mounting brackets. Choose the one that best suits your needs.

• Bracket (B): Commonly used outdoors.
• Bracket (A): Popular due to its magnetic base.

Drill holes in the wall or ceiling for the chosen bracket. Adjust the camera angle by aiming and rotating it, then fasten the screw.

[Diagram Description: Mounting (A) shows a bracket attached to a wall with screws, and the camera magnetically attached to the bracket. Mounting (B) shows a bracket attached to a wall with screws, allowing for adjustable angles (0-360° and 0-90°).]

Resetting the Device

To reset the device to factory default settings, press and hold the reset button for approximately 5 seconds. All changed settings will revert to their default values.

LED Status Indicators

Camera LED:

• Red: Camera is powering on or experiencing a malfunction.
• Flashing Red: Waiting for Wi-Fi connection.
• Fast Flashing Red: Connecting to Wi-Fi.
• Blue: Connected.

Charge LED:

• Red: Charging.
• Blue: Fully charged.

Installation and Use

The camera has a built-in battery. Use the USB-C cable to charge it.

1. Download and install the "Deltaco smart home" app from the Apple App Store or Google Play Store on your mobile device.
2. Launch the "Deltaco smart home" app.
3. Create a new account or log in to your existing account.
4. Tap the "+" icon to add the device.
5. Select the category and then the product type from the list.
6. Connect the device to power.
7. If the LED/lamp does not flash, reset the device. If the status indicator flashes, confirm in the app.
8. Confirm your Wi-Fi network and password.
9. Enter a name for the device. This name will be used by Amazon Alexa and Google Home.

Integration with Smart Assistants

To add the product to Google Home or Amazon Alexa, download the third-party app "smart life" by Tuya. Register an account, log in, reset the product, and add the device to the "smart life" app.

Adding Service to Google Home

Add the device to Google Home. Add the "smart life" service.

Adding Device to Amazon Alexa

Use the "Skills & Games" menu, search for "smart life", enable the app, and log in. Use "discover" to add the device.

Cleaning and Maintenance

• Do not use cleaning solvents or abrasive materials.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If it malfunctions, replace it with a new one.
• Clean the exterior of the device with a soft cloth.

Support

For more product information, visit www.deltaco.eu.

Contact us via e-mail: help@deltaco.eu.

Compliance and Disposal

EU Declaration of Conformity: This radio equipment type wireless device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.aurdel.com/compliance/.

Disposal: This product should not be treated as regular household waste. It must be returned to a designated collection point for the recycling of electric and electronic devices. Further information is available from your local municipality or the retailer where you purchased the product.

Company Information

DistIT Services AB, Glasfibergatan 8, 125 45 Älvsjö, Sweden

DistIT Services AB, Suite 89, 95 Mortimer Street, London, W1W 7GB, England