BNCE-45 Cutting Edge Saw™
Multi-Material Saw | Rebar | Strut | Tubing | Threaded Rod | Conduit & more
Product Overview
The BNCE-45 is a lightweight and compact multi-material Cutting Edge Saw designed for efficient cutting of various materials. It is particularly effective for cutting up to #11 Rebar and 1-5/8" Strut.
The saw features a U-shaped top handle, providing the operator with multiple cutting positions and enhanced maneuverability, especially in confined or tight working areas. It is capable of cutting a wide range of materials, including rebar up to #11, all-thread or coil rod (up to 1-3/4"), conduit, pipe, and tubing.
Specifications
| Specification | Value |
|---|---|
| Voltage/Amperage | 120V 60Hz / 9A |
| Watts | 1100W |
| Replacement Blade | 6.5" (165 mm) Tungsten Carbide Tipped (RB-BNCE-45 Standard) |
| Strut Blade (RB-BNCE-45S) Available/Sold Separately | |
| Cutting Capacity | Rebar - #11 (1-3/8"; 35.8 mm) |
| Strut - 1-5/8" | |
| No Load RPM | 1200 |
| Depth of Cut | 1-7/8" (47.6 mm) |
| Length x Width x Height | 20" x 8" x 7" (515 mm x 155 mm x 101 mm) |
| Net Tool Weight | 10.5 lbs. (4.8 kg) |
| Accessories Included | (1) Heavy-Duty Carrying Bag / Allen Wrenches (2) |
| (2) RB-BNCE-45 standard blades - Installed (1); Replacement (1) | |
| (1) Set replacement carbon brushes | |
| (1) Chip collection attachment |
Blades
- RB-BNCE-45: BNCE-45 Series Cutting Edge Saw™ "STANDARD" TCT Replacement Blade (165 mm) for cutting ferrous and non-ferrous materials (Rebar, Tubing, All-Thread, and general usage).
- RB-BNCE-45S: Replacement Blade for cutting strut up to 1-5/8" (165 mm).
Ordering and Assistance
For ordering or assistance, please contact Customer Service:
Phone: (800) 992-3833
Address: 3450 N. Sabin Brown Road | Wickenburg, AZ 85390
Website: www.BNProducts.com
Exploded View
The exploded view diagram provides a detailed breakdown of the BNCE-45 Cutting Edge Saw's components. It is essential for identifying individual parts for maintenance, repair, or replacement. Each component is assigned a unique number that corresponds to its listing in the parts list below.
Parts List
Below is a comprehensive list of parts for the BNCE-45 Cutting Edge Saw. Note that certain part numbers (20, 21, 31, and 36) are intentionally omitted from this list. Assemblies indicated with '**' are sold as single units.
Parts (1-46)
| No. | Part Number | Assembly Number | Description | QTY |
|---|---|---|---|---|
| 1 | 102560 | SCREW W SPRING WASHER M4X12 | 5 | |
| 2 | 102561 | GUIDE POST PLATE | 1 | |
| 3 | 102562 | NUT M8 | 1 | |
| 4 | 102563 | GUIDE POST | 1 | |
| 5 | 102564 | GUIDE POST SPRING | 1 | |
| 6 | 102565 | BOLT W WASHER M5X16 | 4 | |
| 7 | 102566 | SLIDING BLOCK | 1 | |
| 8 | 102567 | BOLT W SPRING WASHER M5X12 | 4 | |
| 9 | 102568 | GUIDE PLATE | 2 | |
| 10 | 102569 | GEARBOX LOWER COVER | 1 | |
| 11 | 102570 | PIN A6X16 | 2 | |
| 12 | 102571 | BOLT M8X29 CLASS 12.9 | 1 | |
| 13 | 102661 | OUTER BLADE (Hex) FLANGE | 1 | |
| 14 | RB-BNCE-45 | STANDARD BLADE | 1 | |
| 14 | RB-BNCE-45S | STRUT BLADE (OPTIONAL) | 1 | |
| 15 | 102662 | INNER BLADE (Hex) FLANGE | 1 | |
| 16 | 102574 | GEAR BOX | 2 | |
| 17 | 102575 | STIFFENER PLATE | 2 | |
| 18 | 102576 | LEFT AND RIGHT RUBBER PLATE | 4 | |
| 19 | 102577 | SPRING WASHER M5 W FLAT WASHER AND BOLT | 4 | |
| 22 | 102580 | BALL BEARING 6003-2RS | 1 | |
| 23 | 102581 | BEARING RETAINER PLATE | 4 | |
| 24 | 102582 | FLAT KEY 5X5X25 | 1 | |
| 25 | 102583 | SPINDLE | 1 | |
| 26 | 102584 | STOP SLEEVE | 1 | |
| 27 | 102585 | NO 3 GEAR | 1 | |
| 28 | 102586 | CIRCLIP M15 | 5 | |
| 29 | BNCEP24V-26 | BALL BEARING 628-2Z | 1 | |
| 30 | 102588 | CIRCLIP M6 | 1 | |
| 32 | 102590 | NO 2 GEAR W SHAFT | 1 | |
| 33 | 102591 | SPRING FOR LOCK BUTTON | 1 | |
| 34 | 102592 | LOCK BUTTON | 1 | |
| 35 | 102593 | NO 1 GEAR W SHAFT | 1 | |
| 37 | 102595 | GEARBOX TOP COVER | 1 | |
| 38 | 102596 | BOLT W WASHER M5X16 | 4 | |
| 39 | 102597 | NUT M6 | 1 | |
| 40 | 102598 | PINION 10 TOOTH SLOTTED | 1 | |
| 41 | 102599 | BALL BEARING 6000-2Z | 1 | |
| 42 | 102600 | O RING 25X2 | 1 | |
| 43 | 102604 | ARMATURE 120V | 1 | |
| 44 | 102602 | #39-45 | ARMATURE SUPPORT B1 | 1 |
| 45 | 102605 | BALL BEARING 607-2RS | 1 | |
| 46 | 102601 | PAN HEAD TAPPING SCREW 4.2X25 | 4 |
Parts (47-72)
| No. | Part Number | Assembly Number | Description | QTY |
|---|---|---|---|---|
| 47 | 102603 | BOLT W WASHER M5X20 | 4 | |
| 48 | 102606 | BEARING BUSHING | 1 | |
| 49 | 102607 | FAN GUIDE | 1 | |
| 50 | 102608 | PAN HEAD TAPPING SCREW 4.2X70 | 2 | |
| 51 | 102609 | STATOR 120V | 1 | |
| 52 | 102610 | BRUSH HOLDER CONNECTOR | 2 | |
| 53 | 102611 | MOTOR HOUSING | 1 | |
| 54 | 102612 | NAME PLATE | 2 | |
| 55 | 102613 | BRUSH CAP | 2 | |
| 56 | 102614 | CARBON BRUSH SET 120V | 2 | |
| 57 | 102615 | BRUSH HOLDER | 2 | |
| 58 | 102616 | INNER WIRE RETAINER | 1 | |
| 59 | 102617 | PAN HEAD TAPPING SCREW 2.9X9.5 | 2 | |
| 60 | 102618 | ROTATION BUTTON FOR HANDLE | 1 | |
| 61 | 102619 | SPRING FOR ROTATION BUTTON | 1 | |
| 62 | 102620 | TRIGGER SWITCH 120V | 1 | |
| 63 | 102621 | PAN HEAD TAPPING SCREW 4.2X13 | 2 | |
| 64 | 102622 | CORD RETAINING CLIP | 1 | |
| 65 | 102623 | TERMINAL | 1 | |
| 66 | 102624 | POWER CORD 120V | 1 | |
| 67 | 102625 | CORD ARMOR | 1 | |
| 68 | 102626 | RIGHT HANDLE | 1 | |
| 69 | 102627 | PAN HEAD TAPPING SCREW 4.2X16 | 4 | |
| 70 | 102628 | LEFT HANDLE | 1 | |
| 71 | 102629 | FRONT HANDLE | 1 | |
| 72 | 102630 | BOLT W WASHER M6X16 | 2 |
Accessories
- BNCEP-68 - Chip Collection attachment
- BNTB-20 - Heavy Duty Tool Bag
BN Products-USA, LLC - Professional Contractor Tools
