GLOBO LIGHTING

Installation Guide

Step A: Remote Control Battery Installation

? Open the battery compartment on the remote control. Insert 2 x AAA 1.5V batteries (not included). Ensure correct polarity. Close the compartment.

Diagram Description: Shows a remote control with its battery compartment cover being opened, followed by the insertion of two AAA batteries, indicating correct polarity, and finally closing the compartment.

Step B: Ceiling Light Installation

? 1. Secure the mounting bracket to the ceiling using appropriate screws (not included). Ensure it is firmly attached.

? 2. Connect the power supply wires from the ceiling to the light fixture's wiring. (Refer to local electrical codes and consult a qualified electrician if unsure).

? 3. Attach the light fixture to the mounting bracket. This may involve screwing it into place or using a locking mechanism.

? 4. Install the decorative ring or diffuser if applicable.

✔️ 5. Ensure all connections are secure and the fixture is properly mounted before powering on.

Diagram Description: Illustrates the installation process: a mounting bracket being fixed to the ceiling, electrical wires being connected to the fixture, the main light body being attached to the bracket, and a final check of connections. Includes icons for drilling, screws, and wire connection.

Remote Control Functions

The remote control allows operation of the LED ceiling light:

• ✔️ ON/OFF: Toggles the light on or off.
• ? Brightness Control: Adjusts the light intensity (LM+ / LM- buttons).
• ? Color Temperature Adjustment: Selects between different Kelvin temperatures (e.g., 3000K Warm White, 4000K Neutral White, 6500K Cool White). The remote may cycle through steps or allow direct selection.
• ⏱️ Timer: Sets an automatic shut-off timer (e.g., 60S OFF).
• ? Night Light Mode: Activates a low-intensity lighting mode.
• Memory Function: May recall the last used setting.

Diagram Description: Depicts the remote control with labeled buttons for power (ON/OFF), brightness adjustment (LM+, LM-), color temperature selection (3000K, 4000K, 6500K), timer function, and night light mode.

Technical Specifications

• Power: 60W
• Voltage: 252V (typically 230V~50/60Hz operation)
• Light Source: Integrated LED ?
• Color Temperature: Adjustable (e.g., 3000K - 6500K)
• Energy Efficiency Class:

Light Source Information

The integrated LED light source is designed to be a permanent part of the fixture and is not user-replaceable. This is a common design for modern LED fixtures due to their longevity and efficiency. This product contains a light source of energy efficiency class .

(This information is presented in multiple languages across the PDF, confirming the non-replaceable nature of the LED and its energy class.)

Manufacturer Information

Safety Instructions

Please read and follow all safety instructions before installation and use. Ensure electrical connections are made by qualified personnel. Do not expose to water or extreme conditions.

• ✅ CE Marking: Indicates compliance with European Union standards.
• ♻️ Recycling Symbol: Indicates the product should be recycled according to local regulations.
• ❌ Do Not Dispose in Household Waste: Indicates proper disposal methods are required.

Battery Data

Remote control requires: 2 x AAA SUPER HEAVY DUTY batteries (included). Manufacturer: SHENZHEN PKCELL BATTERY CO.,LTD. Model: R03P UM-4 1.5V.