Instruction Manual for minkaAire models including: Ellipse LED Ceiling Fan, Ellipse, LED Ceiling Fan, Ceiling Fan
Ellipse LED Ceiling Fan — City Lights SF
ELLIPSE ©2020 Minka Lighting Inc.Manual design and all elements of manual design are protected by United States Federal and/or State Law including Patents, Trademark , and/or Copyright Laws. F771L INSTALLING THE LIGHT KIT ENJOY YOUR SMART CEILING FAN 3 8 9 0 AL-168-1102S RC1000 FAN #8-32x38mm Machine screws(2PCs.) 1 2 Blade attachment hardware: B1. 1/4*13mm+S screw(11pcs) PC 1/4(6.6*13*0.8mm) flat washer (11pcs) 7 Remote control with holder B2. #8-18*12mm screw (6pcs) and 2mounting screws C Balance kit (1.5V*2AAA battery included) D Wire nut(3pcs) 11. Receiver(9wire nuts included) E. extra 6" and 18"x3 sensor wire A B 5 3 4 6 C 8 9 D 10 11 Assemble the blade onto the motor. Align the two holes of the blades with the motor and tighten them with the screw pack B1.(Fig.5)Then, Convert the fan body, have the blade overlap each other and tighten them with the provides screws B2 in parts bag.(Fig.6) SCREW Fig.5 BLADE Fig.6 2 7 8 ,and slip the coupler cover on to the fan body. 9 0 hanger Fig.7 Fig.8 Fig.9 Fig.10 Fig.11 Fig.12 024 3 (Fig.14) Fig.13 Motor to Receiver electrical connections: connect the WHITE WIRE from the fan to the WHITE wire from receiver. Connect the RED wire from the fan to the RED wire from the Receiver. Connector the BLUE wire from the fan to the BLUE wire from the recelver. connect the PURPLE wire from the fan to the PURPLE wire from the receiver. Connect the GREY wire from the fan to the GREY wire from the receiver.Connect the sensor wire from fan and receiver with the pin-connector. 5 Step 4 Receiver to House Supply Wires Electrical connections: Connect the WHITE wire from the outlet box to the WHITE wire from the receiver. Connect the BLACK wire from the outlet box to the BLACK wire from the receiver. Secure all wire connections with the plastic wire nuts provided. Receiver Screw Fig.14 Black White Downrod Red White Blue Purple Grey Fig.15 Green Sensor Wire 6 7 cover 8 Fig.16 Fig.17 Canopy Screw Canopy Screw Fig.18 Canopy Cover INSTALLING THE LIGHT KIT / (Do not discard)(Fig.19) 20 Blue to blue Screw back the 3 previously removed screws and tighten the light kit Fig.21 22 Fig.19 Fig.20 Fig.21 Fig.22 9 2pcs AAA battery 23 24 (COUNTERCLOCKWISE DIRECTION) Fig.23 (CLOCKWISE DIRECTION) Fig.24 25 Fig.25 60 120 0.14 7.13 51 60 6.3 8.6 3.17 120 0.53 34.13 93 6 22 4,593 210 3165 5854 7.13 34.13 444 172 DOE MKA20021901þÿCorel PDF Engine Version 14.0.0.653; modified using iTextSharp 4.1.6 by 1T3XT