Schelinger Shunt Trip / Voltage Release Installation Instructions
FOR G8/G9/GVL CIRCUIT BREAKER
Models:
MN-1P, MX-1P
Mounting Instructions
The following diagrams illustrate the step-by-step mounting process for the Shunt Trip / Voltage Release unit onto the G8/G9/GVL circuit breaker.
Step 1: Attach the mounting bracket (①) to the circuit breaker using the provided screws (2x).
Step 2: Connect the shunt trip unit (②) to the mounting bracket.
Step 3: Secure the voltage release unit (③) to the circuit breaker mechanism.
Step 4: Ensure all connections are firm and properly seated.
Step 5: Mount the assembly onto a standard DIN TH-35 rail.
Step 6: Connect the wiring according to the provided connection diagram.
Diagram 1: Shows the initial attachment of the mounting bracket to the circuit breaker.
Diagram 2: Illustrates connecting the shunt trip unit.
Diagram 3: Depicts securing the voltage release unit.
Diagram 4: Shows the complete assembly mounted on a DIN rail.
Diagram 5: Provides the connection diagram for the shunt trip (MX) and voltage release (MN) units.
Technical Specifications and Safety Information
- Rated Voltage, Frequency: 230/400V~, 50/60Hz
- Insulation Voltage: 500V
- IP Rating: IP20
- Maximum Terminal Capacity: 2.5mm²
- Operating Temperature: -25°C to +40°C
- Caution: Risk of electric shock. For internal use only.
Multi-language Information
The product is accompanied by instructions and safety information in multiple languages including Polish (PL), English (EN), Russian (RU), French (FR), Czech (CZ), Slovak (SK), Hungarian (HU), Lithuanian (LT), Latvian (LV), Estonian (EE), Spanish (ES), Italian (IT), and German (DE).
Environmental Disposal Information: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
