Metcal - Advanced Manufacturing Solutions
OK International - Global Advanced Manufacturing Equipment
User Manual for METCAL models including: UFC-6CH5106S, UFC-7CH5106S, UFC-6CH9006S, UFC-7CH9006S, UFC-6CH5108S, UFC-7CH5108S, UFC-6CH9008S, UFC-7CH9008S, UFC-6CH5112S, UFC-7CH5112S, UFC-6CN5101S, UFC-7CN5101S, UFC-6CN5102S, UFC-7CN5102S, UFC-6CN5502R, UFC-7CN5502R, UFC-6CN5504S, UFC-7CN5504S, UFC-6CN5504R, UFC-7CN5504R, UFC-6CN8004S, UFC-7CN8004S, UFC-6HF510, UFC-6CH5106S UFC Ultra-Fine Cartridges, UFC-6CH5106S, UFC Ultra-Fine Cartridges, Ultra-Fine Cartridges, Cartridges
Upgrade Kits | Solder Connection | Upgrade your Metcal System
File Info : application/pdf, 2 Pages, 559.92KB
DocumentDocumentUFC Ultra-Fine Cartridges for work in tight spaces are compatible with CV-5200, CV-500 Systems and Ultra-Fine Solder Hand piece CV-H2-UF. Temperature CV-Serie Application 675 °F/357 °C UFC-6 Temperature Sensitive 775 °F/413 °C UFC-7 Most Standard Please note the above temperatures are the maximum temperatures of the heater. The idle temperature is dependent on the geometry of the cartridge (up to 15°C lower.) Ultra-Fine Chisel Cartridge UFC-6CH5106S UFC-7CH5106S (W x L) 0.6 x 5.1 mm UFC-6CH9006S UFC-7CH9006S Long reach, (W x L) 0.6 x 9 mm UFC-6CH5108S UFC-7CH5108S (W x L) 0. 8 x 5.1 mm UFC-6CH9008S UFC-7CH9008S Long reach, (W x L) 0.8 x 9 mm UFC-6CH5112S UFC-7CH5112S (W x L) 1.2 x 5.1 mm Ultra-Fine Conical Cartridge UFC-6CN5101S UFC-7CN5101S (ø x L) 0.13 x 5.1 mm UFC-6CN5102S UFC-7CN5102S (ø x L) 0.2 x 5.1 mm www.okinternational.com - www.metcal.com Page | 11 Ultra-Fine Conical Cartridge UFC-6CN5502R UFC-7CN5502R Bent 30°, for work under a microscope, (ø x L) 0.2 x 5.6 mm UFC-6CN5504S UFC-7CN5504S For work in tight spaces, (ø x L) 0.4 x 5.1 mm UFC-6CN5504R UFC-7CN5504R Bent 30°, for work under a microscope, (ø x L) 0.4 x 5.6 mm UFC-6CN8004S UFC-7CN8004S Long reach, (ø x L) 0.4 x 8.0 mm Ultra-Fine Rework Hoof-Cartridges For Drag Soldering SOIC/QFP's UFC-6HF5108S UFC-7HF5108S Micro Hoof, (Bevel/L) 45° x 1.13 mm, (ø x L) 0.8 x 5.1 mm UFC-6HF5112S UFC-7HF5112S Micro Hoof, (Bevel/L) 45° x 1.71 mm, (ø x L) 1.21 x 5.1 mm www.okinternational.com - www.metcal.com Page | 12