Sunslice Gravity 10 Extreme User Manual
Energy anywhere
Introduction
Thank you for choosing Sunslice. We hope you have a great experience with the Sunslice Gravity 10 Extreme.
The Gravity 10 Extreme was developed with the goal of giving people everywhere access to energy.
This power bank will prove useful not only for travelers but also in everyday life. With a USB-C PD 20W output, a USB-A QC3.0 output, and a compact, robust design, this energy storage system can charge a wide range of USB devices anywhere, anytime.
This manual contains important information on product safety and care, as well as step-by-step instructions for using your Gravity 10 Extreme. To get the most out of your purchase, we recommend reading the manual thoroughly. Please keep it in a safe place for future reference.
Sincerely, Geoffroy & Henri
In the Box
- Gravity 10 Extreme
- USB-C to USB-C Cable
- Carabiner Hook
Product Overview
LED Indicators: Show charge status (4 blue LEDs).
Flashlight: ?
Battery Capacity: 10,000 mAh (3.7V)
Dimensions: 140 mm x 73 mm x 17 mm
Weight: 259 g
POWER Button: Activates the battery.
Battery Interface:
- USB-A - QC3.0 18W Output: 5V/3A, 9V/2A, 12V/1.5A
- USB-C PD 20W Output: 5V/3A, 9V/2.22A, 12V/1.67A
- 18W Input: 5V/3A, 9V/2A
Includes protective rubber.
Compatible With
Devices: Smartphone, Tablet, GPS, Speaker, USB devices, Drone, GoPro, Satellite Phone, Headlamp, Smartwatch, Camera.
Main Features
- ??️ Water and Dustproof
- Multiple USB Ports
- Charge 2 Devices Simultaneously
- Robust and Shockproof Design
- LED Charge Status Indicators
- Integrated Flashlight ?
- Compatible with Sunslice Solar Modules Fusion Flex and Fusion
Technical Specifications
| Capacity | 10,000 mAh (3.7V) |
| Technology | Lithium-Ion Polymer |
| Total Output Power (Battery Max. 20W) | USB-C1 PD 20W: 5V/3A, 9V/2.22A, 12V/1.67A USB-A QC3.0 18W: 5V/3A, 9V/2A, 12V/1.5A |
| Total Input Power (Battery Max. 18W) | USB-C1 PD 18W: 5V/3A, 9V/2A |
| Weight | 259 g |
| Dimensions | 140 x 73 x 17 mm |
| Charge Status | 4 LED Indicators |
| Flashlight | Yes ? |
Airport Safe
The Sunslice Gravity 10 Extreme is airport-safe, with a capacity of 37 Wh, which is below the maximum allowed capacity of 100 Wh for air travel. Please note that the Gravity must be carried in the cabin luggage only.
Charging the Gravity
There are two ways to charge the Gravity: using a standard power adapter and another power source like a laptop, or with a compatible Sunslice solar panel.
With a Power Adapter
Adapter: Charging speed may vary depending on the adapter. Visit our website to select the best adapter. (Adapter not included).
To charge the Gravity 10 Extreme with a standard power adapter, use the included USB-C cable or another USB-C cable. Connect it to the adapter's USB port and to the Gravity's USB-C port (see Section II: Product Overview).
[Diagram description: A wall socket is shown connected to a power adapter, which is then connected via a USB-C cable to the Gravity 10 Extreme's USB-C input port.]
With a Laptop
You can also charge the Gravity with your laptop by connecting the USB-C cable to your laptop's USB output and to the Gravity's USB-C input.
[Instruction: Choose the appropriate cable for your laptop. For more information, visit our website.] www.sunslice-solar.com
[Diagram description: A laptop is shown connected via a USB-C cable to the Gravity 10 Extreme's USB-C input port.]
With a Solar Panel
For off-grid use, you can connect the Gravity via its USB-C port to a Sunslice solar panel and charge it. This option provides independent power for travel and outdoor activities.
Connect the solar panel's USB cable to the USB-A output and the other end to the Gravity's USB-C port.
[Diagram description: A Sunslice Fusion Core 10 solar panel is shown connected via a USB-A to USB-C cable to the Gravity 10 Extreme.]
Charge Your Devices
Charging begins automatically. If it does not, press the POWER button on the Gravity.
The Gravity 10 Extreme is equipped with a voltage stabilization circuit to prevent damage to your devices.
To charge your device, use the appropriate USB cable for your device. Connect one end to the Gravity's USB-C or USB-A ports and the other end to your device's USB port.
Water Resistant
The Gravity 10 Extreme, with its IP67 rating, is specifically designed for use in harsh conditions. This international standard guarantees complete protection against dust and also provides water resistance, allowing the device to remain submerged in water up to 1 meter deep for approximately 30 minutes.
In practical terms, this means the power bank can be used outdoors without worry, whether in rain, at the beach, hiking, or in dusty environments, ensuring reliable and durable operation.
Our Warranties
Premium Quality: We select the best materials to ensure high quality and durability for all our products.
Circuit Protection: The Gravity 10 Extreme is equipped with a voltage stabilization circuit to prevent damage to your devices.
2 Year Warranty: The Gravity 10 Extreme comes with a 2-year warranty. If anything goes wrong, please contact us directly via email at: service@sunslice-solar.com
Before contacting us, please check our FAQ at: www.sunslice-solar.com/apps/help-center
Precautions
- If the Gravity does not charge your device, please re-read this user manual. If the problem persists, please contact us.
- Do not puncture, throw, drop, bend, or modify your Sunslice Gravity.
- Do not leave the Sunslice Gravity in the rain or near water. Do not expose the Gravity to fire or excessive heat.
- Do not short-circuit the battery with lead or other metal objects.
- Keep the battery terminals free from dust, lint, etc., that could prevent a proper connection.
- Please fully charge the power bank after prolonged storage, as it can slowly discharge over time.
- Do not apply excessive force when connecting or disconnecting cables to the Gravity.
- Do not disassemble the charger or modify its structure in any way.
- Do not use the Sunslice Gravity if it emits unusual smells, heat, distortion, or other anomalies.
- Keep away from children.
You are welcome to learn more about our products on our website: www.sunslice-solar.com
Company Information
Sunslice SRL
Chemin du Cyclotron 6,
1348 Louvain-la-Neuve, Belgique
Certifications: RoHS, FCC, CE
