Instruction Manual for Hunan models including: LY06, LY06 Wireless Binaural Stereo Music Headphones, Wireless Binaural Stereo Music Headphones, Binaural Stereo Music Headphones, Stereo Music Headphones, Music Headphones, Headphones
Hunan Xiangdangdang Intelligent Technology Co., Ltd LY06 LY06 2BHCR-LY06 2BHCRLY06 ly06
File Info : application/pdf, 2 Pages, 249.25KB
DocumentDocumentTWSHIFI A2DP1.3/HIFI1.6/HFP1.6/AVRCP1.6/HSP1.2 8 2.4G 1.5 1.5 11.1 1.2 2 3 1A 5V 5V1A 4./ 1.5 5. - 3 "" - 5 "" - "" - - - - 2 - - - - - 3 - Warranty statemen 1 If the product has any function problem, can enjoy the warranty service, contact customer service. 2 Artificial damage, broken, artificial scratch, water, no warranty card is not within the scope of the warranty. 3( )The customer must fill in all necessary information (customer name, address, telephone number, date of purchase, etc.) . 4 The warranty service needs to be in the warranty card and according to the request operation then the warranty, otherwise does not guarantee Mode: Name:_________________ Tel:__________________ Add:__________________ Date________________ Wireless Binaural Stereo music headphones Manual Parameter configuration True wireless connectivity (TWS) to achieve wireless stereo, left and right channel separation, HIFI audio, left and right ears have a full bluetooth function, can be used alone or in pairs Note: the product parameters will be different according to the machine type, usage mode, environment and so on. A2DP1.3/HIFI1.6/HFP1.6/AVRCP1 Support Agreement: .6/HSP1.2 Transmissiondistance: 8M Frequency: 2.4G Power reading: YES Headphone charging 1.5H time Charging Time: 1.5H Charge 11.1When the headset is charged, the indicator light is always bright, and when the headset is full, the indicator light turns off 1.2The charging indicator lights flash when the charging bin is charged, and it always lights when it is full. 2This product built-in non-removable rechargeable battery, charging mode for external wire charging. 3Charging current 1A voltage 5V, can not use more than 5V1A charger to charge the product. 4.It takes about 1.5 hours for the Bluetooth headset/charging dock to be fully charged. 5.When the power of the Bluetooth headset is too low, the headset will send out an alert sound to remind the user to charge it at regular intervals. Function introduction Power on-take out the headphone from the charging bin. The headphone will automatically turn on and pair. You can also press the multi-function key of the headphone for 3 seconds to hear the"Power on" sound. Power off-Take out the earphone, earphone automatic boot pair, long press the earphone 5 seconds to hear the"Power off" sound. Pair-Put the headphones into the charging automatic shutdown, you can also press the headphones 5 seconds to hear the"connected" sound Play pause-click any headset Listen to the phone-click any headset Hang up-click any headset during a call Reject calls-press any headset for 2 seconds Last song-double click on the ear Next track-double click on the main ear Increase volume-three clicks on the main ear Volume reduction-three clicks to the ear pair Voice assistant-press any headset for 3 seconds Auto-reconnect-just turn it on, there must be a matching record before FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user's authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.