Instruction Manual for SINCO Sigature models including: SC-11, SC-11 48 Inch Gas Pizza Oven, 48 Inch Gas Pizza Oven, Gas Pizza Oven, Pizza Oven
Sinco Signature 49'' Gas Pizza Oven SC-11
File Info : application/pdf, 18 Pages, 3.81MB
DocumentDocumentSinco Signature 48'' Gas Pizza Oven SC-11 CONTENTS A GENERAL INFORMATION A1 DESCRIPTION A2 TECHNICAL INFORMATION A3 TRANSPORT A4 UNPACKING B ASSEMBLY C GENERAL WARNINGS D USING THE DEVICE AND CLEANING and MAINTENANCE F TROUBLESHOOTING G INJECTOR CHANGE and GAS ADJUSTMENT H GAS CONNECTION PICTURES I SPARE PARTS LIST - DISASSEMBLED VIEW Page 2 Page 3 Page 3 Page 3 Page 4 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 1 Sinco Signature 48'' Gas Pizza Oven SC-11 A GENERAL INFORMATION READ THE OPERATING AND MAINTENANCE INSTRUCTIONS BEFORE INSTALLING THIS DEVICE. READ CAREFULLY. IMPROPER INSTALLATION AND REPLACEMENT OF PARTS MAY DAMAGE THE PRODUCT OR CAUSE INJURY TO PERSONS. OUR COMPANY IS NOT RESPONSIBLE FOR INTENTIONAL DAMAGE TO THE DEVICE, DAMAGES CAUSED BY NEGLIGENCE, FAILURE TO COMPLY WITH THE INSTRUCTIONS AND REGULATIONS, OR INCORRECT CONNECTIONS. UNAUTHORIZED INTERFERENCE WITH THE DEVICE WILL VOID THE PROD WILL. 1. Keep this booklet safe to hand for future reference for other operators. Keep it somewhere. 2. The device must be installed in accordance with the current regulations and instructions in the country of use. must be done by authorized personnel. 3. This device must be used by trained persons. 4. In case of device malfunction, turn off the device. The device must only be installed by the manufacturer. An authorized service center must provide service. Ask for original spare parts. 2 Sinco Signature 48'' Gas Pizza Oven SC-11 A1 DESCRIPTION *This high-efficiency device is produced for use in industrial kitchens. It is a professional pita and lahmacun bakery. Home Dimensions (mm) Internal Dimensions (mm) Packaging Dimensions SC-11 1265X1730X800 950x1250 1300X1790X970 A2 TECHNICAL INFORMATION Home Study Range °C of (Kw) SC-11 400 34,00 Gas Consumption m³/h (NG) LPG (Kw) Gas Consumption kg/h (LPG) 3,59 26,8 2,1 A3 TRANSPORT *This device cannot be handheld. Therefore, a lifting device (forklift or Use pallet truck. (The lifting arms of the forklift or pallet truck are placed more than half way below the device.) must reach the part). 3 Sinco Signature 48'' Gas Pizza Oven SC-11 OPENING THE A4 PACKAGE *The device must be opened and its packaging must be destroyed in accordance with the regulations in the country of use. Food contact parts are stainless steel. All plastic parts are marked with the symbol of the material. *Check that the parts of the device are complete and that there is no damage during transportation. B ASSEMBLY *Place the product on a flat and solid ground, take necessary precautions against risks of tipping over. take it. *The personnel who will provide installation and service to the device must be experts in their field and have an installation-service license issued by our company. *All adjustments and changes to the gas installation connection of the device must be made by an authorized person. *The environment where the gas appliance is located must be adequately ventilated and must have air vents. *The device must be connected in accordance with the national and local gas standards of the relevant country. *Device gas inlets are marked on the body with the "G" label. *Connection to the gas installation must be made with a metal flexible pipe of appropriate diameter and a ball valve. The ball valve in question should be fixed in a place away from heat and easily accessible in case of danger. After the gas inlet connection is made, possible gas leaks should be checked. *Gas and pressure must be adjusted according to the data on the device data plate. If the gas type to which the device is set is not suitable for the gas type at the installation site, follow the written instructions for adjusting it to a different gas type. (Topic: G) *For ease of maintenance and cleaning of pita and lahmacun ovens, a space of at least 50 cm should be left on the right and left. The device should be operated under a hood. 4 Sinco Signature 48'' Gas Pizza Oven SC-11 C GENERAL WARNINGS *Do not use the device in facilities without adequate lighting. ! *Do not touch any moving parts while using the device. ! *Do not install the device near flammable or explosive materials. ! ! *Do not operate the device idle. *Do not load too much below or above the capacity of the device. ! *Do not intervene in the device without using appropriate protective equipment. ! *In case of a fire or flash of flame for any reason in the area where the device is used, immediately ! turn off the gas valves and electrical switches (if any) and use a fire extinguisher. Never use water to extinguish the flame. *This device should be used with the cover open. When the lid is closed, the flame will go out ! because the oxygen inside the device will be depleted. *If there is a gas leak in the environment where gas pita and lahmacun ovens are located, do not ÿ light a fire or play with electricity. ! *Never allow the tightness check to be carried out with flame. *For constant temperatures above 300°C and proper operation of the burners, the lid must ! remain open. *If the product is used without a bottom stand, a space of 20-30cm should be left between it and the counter ! where it will be mounted. 5 Sinco Signature 48'' Gas Pizza Oven SC-11 D USE OF THE DEVICE *Control Panel: A : Off position B : Cigarette lighter position C : Full flame D : Half flame *Use of: · Since pita and lahmacun ovens work with LPG and NG (natural gas), depending on how they are used, Connect the gas inlet from the back of the oven. · Open the main gas valve. · Press the gas knob of the oven inwards to the pilot flame position and ignite the pilot with the ignition rod through the hole on the side of the burner. · After the pilot is ignited, keep the button pressed for a few seconds (min. 10) to allow the safety thermocouple tip to heat up sufficiently. · Then turn it to the desired position (half or full flame marked on the button). Adjust by turning. · If the device is being operated for the first time, keep the button pressed in the pilot flame position for a while before igniting to evacuate the air in the gas installation. · Close the door after placing the Pita or Pizza in the oven. · Close the gas valve when you are finished using the device. 6 Sinco Signature 48'' Gas Pizza Oven SC-11 AND CLEANING and MAINTENANCE ÿ What to Do After Each Use: · Disconnect the gas connection before cleaning the device. · Clean the outer surface of the device with a damp cloth. · Clean the internal surfaces of the device with a damp cloth after each use. · Do not use acid or similar materials when cleaning the device. · When cleaning the device, do not wash it with pressurized water. · Do not clean the device with materials that may scratch the chrome material, such as steel wool. ÿ Things to be Done Periodically; · Maintenance should only be performed by trained persons. · Gas tank, seat pilot, thermo elements, taps, burner, lighter and spark plug cables Since they are not maintained, they are replaced when they break down. · Check the gas connection hoses at regular intervals. Tears, holes etc. In such cases, replace the hoses. · Check the ventilation of the environment where the device is located at regular intervals. 7 Sinco Signature 48'' Gas Pizza Oven SC-11 F TROUBLESHOOTING THE DEVICE DOES NOT WORK 1. Check whether the gas connection of the device is made. 2. If there is no gas flow to the pilots, the device will not work. 3. If the gas inlet hoses leak gas due to tears, holes, etc., the device will not work. 4. When the lid is closed, the flame will go out because the oxygen inside the device will be exhausted. IT DOES NOT COOK WELL DEVICE STOPPED 1. Leave the oven door open. 2. Check the oven temperature setting. 3. If the product is used without a bottom stand, a space of 20-30 cm should be left between it and the counter where it will be mounted. 1. Since the gas taps of pita and pizza ovens have safety valves, if the flame goes out for any reason, the gas flow will be automatically cut off. In this case, the device will not work. 2. In case of gas leakage, If there is a solenoid gas cutter alarm in the environment, the gas flow is cut off and the device does not work. Ventilate the environment with air vents. · If pita, pizza or lahmacun cooking is not done at the appropriate quality, · If any of the security functions are not working, ÿ Do not use the device. *If the above problems still persist, contact our authorized services. 8 Sinco Signature 48'' Gas Pizza Oven SC-11 G INJECTOR CHANGE AND GAS ADJUSTMENT GAS OVENS BURNER - INJECTOR CHANGE TABLE NG / LPG G20 G25 G30 G31 30/50 mbar 30/50 mbar SC-11 ÿ mm 1,8-2,5 X 4x 1,8-2,5 4x 1,1-1,5 4x 1,1-1,5 4x Replacement of Oven Injectors; 1. Remove the "C" injector and replace it considering the values in the table. (Shape 1) 2. In case of unintentional flame extinguishment, when the "B" thermo element cannot see the burning flame Gas cock with safety valve "A" will cut off the gas flow. (Figure 1) Making Half Flame Settings; 1. Remove the faucet knob. Turn the half flame screw "A" on the left side of the gas tap flat. Turn it with a slotted screwdriver. (Figure 2). Left direction for LPG to natural gas conversions, Turn it to the right for conversion from natural gas to LPG. 9 Sinco Signature 48'' Gas Pizza Oven SC-11 H GAS CONNECTION PICTURES Figure 1 Figure 2 10 Sinco Signature 48'' Gas Pizza Oven SC-11 I SPARE PARTS LIST - DISASSEMBLED VIEW 11 Sinco Signature 48'' Gas Pizza Oven SC-11 I SPARE PARTS LIST - DISASSEMBLED VIEW PRODUCT CODE: PLF.PLS.D1 NO NAME OF THE PRODUCT 1 CHIMNEY OUTLET PLATE 2 UPPER CHIMNEY OUTLET FLANGE 3 OUTER BODY SHEET 4 100 CM*50 CM*3 CM PIZZA PIZZA 5 GAS PIPE 650 MM 6 OVEN DOOR 7 SHELF HANGER PIN 8 NO:2 BAKELITE HANDLE 9 GRANÿT 1190*320 10 ACCOUNT 11 GAS TANK 12 RAKOR 3/8-3/8 13 YOU PANEL SACI 14 ÇAKMAKLIK SACI 15 BATTERY OPERATED LIGHTER 16 LIGHTER HOLDER PROTECTION 17 LABELS 18 BUTTONS 19 BUTTON SOCKET 8 MM 20 Ø 60 0-500 °C THERMOMETER 21 GAS VALVE 22 M8*1200 MM NO:19 TERMOKUPL 23 ELBOW 3/4 24 COIL 3/4 25 ATMOSPHERIC BURNER 750 MM 26 IGNITION PLUG 27 INJECTOR M8*0,75 Ø 1,50 MM. 28 INJECTOR M8*0.75 Ø 1.80 MM. 29 INJECTOR M8*0.75 Ø 2.50 MM. 30 INJECTOR M8*0,75 Ø1,10 MM 31 AIR ADJUSTMENT PIPE 32 3/4- 3/4 60 CM GAS FLEX 33 3/8 50 CM GAS FLEX 34 22 CM GAS FLEX 35 ATMOSPHERIC BURNER 900 MM 36 FEET 37 SIX 38 OUTER BODY BACK SHEET U. CODE YSC-KNX.PLF-LZ-0018 YSC-KNX.PLF-LZ-0029 YSC-KNX.PLF-LZ-0047 M.TAS-FRN-PZ-006 YBR-KNX.PLF-KS-0006 YSC-KNX.PLS-LZ-0199 YTL-KNX.KFR-FS-0003 M.AKS-KLP-BKL-003 JP.M.TAS-GRN-012 M.CNT-PLS-KLN-14*24*2 M.GAZ-DPO-PG-086 M.GAZ-TES-SRI-006 YSC-KNX.PLF-LZ-0015 YSC-KNX.PLF-LZ-0119 M.GAZ-CKM-PIL-001 M.GAZ--PIEZ-KRM M.AKS-OZL-MTL-006 M.AKS-DGM-EMP-024 M.AKS-DGM-SKT-001 M.ELK-EDM-DGT-006 M.GAZ-VNA-ECA-006 M.GAZ-TRL-005 M.MEK-TES-GLV-007 M.MEK-TES-SYH-001 M.GAZ-BRL-INX-008 M.GAZ-CKM-BUJI-001 JP.M.GAZ-ENJ-LPG-012 M.GAZ-ENJ-NG-006 M.GAZ-ENJ-NG-008 M.GAZ-ENJ-NG-013 M.GAZ-BRL-DKM-002 M.GAZ-TES-SPR-004 M.GAZ-TES-SPR-012 M.GAZ-TES-SPR-043 M.GAZ-BRL-INX-010 M.AKS-AYK-NKL-004 - YSC-KNX.PLF-LZ-0010 12 Sinco Signature 48'' Gas Pizza Oven SC-11 I SPARE PARTS LIST - DISASSEMBLED VIEW SC-11 13 Sinco Signature 48'' Gas Pizza Oven SC-11 I SPARE PARTS LIST - DISASSEMBLED VIEW PRODUCT CODE:SC-11 NO NAME OF THE PRODUCT 1 CHIMNEY OUTLET PLATE 2 UPPER CHIMNEY OUTLET FLANGE 3 OUTER BODY SHEET 4 GAS PIPE 905 MM 5 125 CM*50CM*3 CM PIZZA PIZZA 6 ACCOUNT 7 OVEN DOOR 8 SHELF HANGER PIN 9 NO:2 BAKELITE HANDLE 10 GRANÿT 1190*320 11 GAS TANK 12 RAKOR 3/8-3/8 13 YOU PANEL SACI 14 LIGHTER SHEET 15 BATTERY OPERATED LIGHTER 16 LIGHTER HOLDER PROTECTION 17 LABELS 18 BUTTONS 19 BUTTON SOCKET 8 MM 20 Ø 60 0-500 °C THERMOMETER 21 GAS VALVE 22 FOOT 23 INJECTOR M8*0,75 Ø 1,50 MM. 24 INJECTOR M8*0.75 Ø 1.80 MM. 25 INJECTOR M8*0.75 Ø 2.50 MM. 26 ATMOSPHERIC BURNER 900 MM 27 COIL 3/4 28 ELBOW 3/4 29 M8*1200 MM NO:19 THERMOCOUPLE 30 IGNITION PLUG 31 3/4- 3/4 60 CM GAZ FLEKSÿ 32 3/8 50 CM GAZ FLEKSÿ 33 22 CM GAZ FLEKSÿ 34 AIR ADJUSTMENT PIPE 35 ATMOSPHERIC BURNER 1150 MM 36 SIX 37 OUTER BODY BACK SHEET U. CODE YSC-KNX.PLF-LZ-0018 YSC-KNX.PLF-LZ-0029 YSC-KNX.PLF-LZ-0009 YBR-KNX.PLF-KS-0005 M.TAS-FRN-PZ-008 M.CNT-PLS-KLN-14*24*2 YSC-KNX.PLS-LZ-0199 YTL-KNX.KFR-FS-0003 M.AKS-KLP-BKL-003 JP.M.TAS-GRN-012 M.GAZ-DPO-PG-086 M.GAZ-TES-SRI-006 YSC-KNX.PLF-LZ-0015 YSC-KNX.PLF-LZ-0119 M.GAZ-CKM-PIL-001 M.GAZ--PIEZ-KRM M.AKS-OZL-MTL-006 M.AKS-DGM-EMP-024 M.AKS-DGM-SKT-001 M.ELK-EDM-DGT-006 M.GAZ-VNA-ECA-006 M.AKS-AYK-NKL-004 JP.M.GAZ-ENJ-LPG-012 M.GAZ-ENJ-NG-006 M.GAZ-ENJ-NG-008 M.GAZ-BRL-INX-010 M.MEK-TES-SYH-001 M.MEK-TES-GLV-007 M.GAZ-TRL-005 M.GAZ-CKM-BUJI-001 M.GAZ-TES-SPR-004 M.GAZ-TES-SPR-012 M.GAZ-TES-SPR-043 M.GAZ-BRL-DKM-002 M.GAZ-BRL-INX-007 - YSC-KNX.PLF-LZ-0010 14 Sinco Signature 48'' Gas Pizza Oven SC-11 I SPARE PARTS LIST - DISASSEMBLED VIEW 15 Sinco Signature 48'' Gas Pizza Oven SC-11 I SPARE PARTS LIST - DISASSEMBLED VIEW PRODUCT CODE:PLF.PLS.D3 NO NAME OF THE PRODUCT 1 CHIMNEY OUTLET PLATE 2 UPPER CHIMNEY OUTLET FLANGE 3 OUTER BODY SHEET 4 80CM*60CM*3CM PIZZA PIZZA 5 GAS PIPE 240 MM U. CODE YSC-KNX.PLF-LZ-0018 YSC-KNX.PLF-LZ-0029 YSC-KNX.PLF-LZ-0109 M.TAS-FRN-PZ-011 YBR-PLF.PLS-KS-0003 6 SIX 7 IGNITION PLUG 8 ACCOUNT 9 OVEN DOOR 10 SHELF HANGER PIN 11 NO:2 BAKELITE HANDLE 12 GRANÿT 990*280 13 gas tank 14 gas valve 15 rakor 3/8-3/8 16 front panel sheet 17 lighter sheet 18 battery lighter 19 lighter protection 20 labels 20 labels 21 Ø 60 0-500 ° C thermometer 22 button 23 button socket 8 mm 24 3/4 - 3/4 60 CM GAS FLEX 25 3/8 50 CM GAS FLEX 26 22 CM GAS FLEX 27 INJECTOR M8*0,75 Ø 1,50 MM. 28 INJECTOR M8*0.75 Ø 1.00 MM. 29 INJECTOR M8*0.75 Ø2.00 MM. 30 ATMOSPHERIC BURNER 1" FINGER SLEEVE 31 SLEEVE 3/4 32 ELBOW 3/4 33 M8*1200 MM NO:19 THERMOCOUPLE 34 AIR ADJUSTMENT PIPE 35 FEET 36 OUTER BODY BACK SHEET - M.GAZ-CKM-BUJI-001 M.CNT-PLS-KLN-14*24*2 YSC-KNX.PLS-LZ-0199 YTL-KNX.KFR-FS-0003 M.AKS-KLP-BKL-003 M.TAS-GRN-013 M.GAZ-DPO-PG-086 M.GAZ-VNA-ÖZR-001 M.GAZ-TES-SRI-006 YSC-KNX.PLF-LZ-0087 YSC-KNX.PLF-LZ-0119 M.GAZ-CKM-PIL-001 M.GAZ--PIEZ-KRM M.AKS-OZL-MTL-006 M.ELK-EDM-DGT-006 M.AKS-DGM-EMP-024 M.AKS-DGM-SKT-001 M.GAZ-TES-SPR-004 M.GAZ-TES-SPR-012 M.GAZ-TES-SPR-043 JP.M.GAZ-ENJ-LPG-012 M.GAZ-ENJ-LPG-016 M.GAZ-ENJ-NG-010 M.GAZ-BRL-INX-014 M.MEK-TES-SYH-001 M.MEK-TES-GLV-007 M.GAZ-TRL-005 M.GAZ-BRL-DKM-002 M.AKS-AYK-NKL-004 YSC-KNX.PLF-LZ-0097 16 Sinco Signature 48'' Gas Pizza Oven SC-11 I SPARE PARTS LIST - DISASSEMBLED VIEW 17 Sinco Signature 48'' Gas Pizza Oven SC-11 I SPARE PARTS LIST - DISASSEMBLED VIEW PRODUCT CODE:PLF.PLS.D4 NO NAME OF THE PRODUCT 1 CHIMNEY OUTLET PLATE 2 UPPER CHIMNEY OUTLET FLANGE 3 OUTER BODY SHEET 4 80CM*80CM*3CM PIZZA PIZZA 5 GAS PIPE 450 MM 6 OVEN DOOR 7 SHELF HANGER PIN 8 NO:2 BAKELITE HANDLE 9 GRANÿT 990*280 10 ACCOUNT 11 IGNITION PLUG 12 GAS TANK 13 FITTING 3/8-3/8 14 FRONT PANEL SHEET 15 LIGHTER SHEET 16 BATTERY OPERATED LIGHTER 17 LIGHTER HOLDER PROTECTION 18 LABEL 19 Ø 60 0-500 °C THERMOMETER 20 BUTTON 21 BUTTON SOCKET 8 MM 22 GAS VALVE 23 3/4- 3/4 60 CM GAS FLEX 24 3/8 50 CM GAS FLEX 25 22 CM GAS FLEX 26 INJECTOR M8*0,75 Ø 1,50 MM. 27 INJECTOR M8*0.75 Ø 1.00 MM. 28 INJECTOR M8*0.75 Ø2.00 MM. 29 COIL 3/4 30 CONNECTION NUT 31 COIL 1'' 32 ELBOW 3/4 33 M8*1200 MM NO:19 THERMOCOUPLE 34 60 CM ATMOSPHERIC BURNER 35 AIR ADJUSTMENT PIPE 36 FEET 37 SIX 38 OUTER BODY BACK SHEET U. CODE YSC-KNX.PLF-LZ-0018 YSC-KNX.PLF-LZ-0029 YSC-KNX.PLF-LZ-0096 M.TAS-FRN-PZ-010 YBR-PLF.PLS-KS-0002 YSC-KNX.PLS-LZ-0199 YTL-KNX.KFR-FS-0003 M.AKS-KLP-BKL-003 M.TAS-GRN-013 M.CNT-PLS-KLN-14*24*2 M.GAZ-CKM-BUJI-001 M.GAZ-DPO-PG-086 M.GAZ-TES-SRI-006 YSC-KNX.PLF-LZ-0087 YSC-KNX.PLF-LZ-0119 M.GAZ-CKM-PIL-001 M.GAZ--PIEZ-KRM M.AKS-OZL-MTL-006 M.ELK-EDM-DGT-006 M.AKS-DGM-EMP-024 M.AKS-DGM-SKT-001 M.GAZ-VNA-ECA-006 M.GAZ-TES-SPR-004 M.GAZ-TES-SPR-012 M.GAZ-TES-SPR-043 JP.M.GAZ-ENJ-LPG-012 M.GAZ-ENJ-LPG-016 M.GAZ-ENJ-NG-010 M.MEK-TES-SYH-001 YTL-KNX.PLF-KS-0001 M.MEK-TES-SYH-002 M.MEK-TES-GLV-007 M.GAZ-TRL-005 M.GAZ-BRL-INX-003 M.GAZ-BRL-DKM-002 M.AKS-AYK-NKL-004 - YSC-KNX.PLF-LZ-0097 18PDFium