ITC Warranty & Return Policy
Installation Guide for ITC models including: 69307 Down Courtesy Light, 69307, 69307 Courtesy Light, Down Courtesy Light, Courtesy Light, Down Light, 69307 Light, Light
Index of /files/resources/
File Info : application/pdf, 1 Pages, 759.52KB
DocumentDocumentDown Courtesy Light Part#: 69307 PARTS NEEDED: INSTALLATION INSTRUCTIONS Courtesy Light Mounting Screws Power Drill Safety Instructions · Disconnect power before installing, adding or changing any component. · To avoid a hazard to children, account for all parts and destroy all packing materials. · Light is rated for interior installation only, do not install in wet locations. · Operating Voltage: 10 - 14V DC Wire Nuts (not provided) 1. Determine where your LED light fixture will be in- stalled. Mark the location of the screw holes. Drill a hole for the wires and screws. 2. Use the wiring diagram below to wire the light to the units power. Test the light 3. Feed the wires through the hole and screw the back nut onto the fixture. Snap bezel onto the light. Courtesy Light Incoming 12V DC Power Red (+) Black (-) Single Color Wiring Red (+) Black (-) 3030 Corporate Grove Dr. Hudsonville, MI 49426 Phone: 616.396.1355 itc-us.com Incoming 12V DC Power Black (-) Red (+) RGBW Controller sold separately RGBW Wiring Courtesy Light Red (-) Green (-) Blue (-) White (-) Black (+) For warranty information please visit www.itc-us.com/warranty-return-policy Rev B · 04/07/20 Page 1 of 1