Introduction

Congratulations on your purchase of a DEWALT tool. This pole saw, model DCMPS567, is designed for professional power tool users, built on years of experience and thorough product development. This manual provides essential information for its safe and efficient use, including technical data, safety warnings, and maintenance guidelines.

Technical Specifications

The DEWALT DCMPS567 operates on an 18V XR Li-Ion battery system, featuring a 20 cm bar length and a maximum cutting length of 15 cm. It offers a maximum chain speed of 6.5 m/s and has an oil capacity of 115 ml. The tool weighs 4 kg without the battery pack. Detailed noise and vibration values are provided in accordance with EN ISO 11680-1:2011 standards.

Safety First

WARNING: Always read and understand all safety warnings and instructions before operating this tool. Failure to do so may result in serious injury. Key safety precautions include maintaining a clean work area, using appropriate personal protective equipment (eye protection, hearing protection, gloves, sturdy footwear), avoiding overreaching, and ensuring the tool is switched off before making adjustments or changing accessories. Always keep children and bystanders at a safe distance.

Operation Guidelines

For optimal performance and safety, always use the pole saw for its intended purpose – cutting tree branches. Ensure proper footing and balance, and never operate the tool while tired or under the influence of substances. Grip the pole saw firmly with both hands and keep the trigger finger off the trigger until ready to cut. Be aware of potential kickback and follow the provided precautions to minimize this risk, including keeping the saw chain sharp and properly tensioned.

Maintenance and Storage

Proper maintenance is crucial for the longevity and safety of your DEWALT pole saw. Keep cutting edges sharp and clean, and follow lubrication instructions. Store the tool indoors in a cool, dry place, out of reach of children. Always reduce chain tension after use as the chain contracts when cooling.

EC Declaration of Conformity

DEWALT declares that the DCMPS567 products comply with relevant directives including the Machinery Directive (2006/42/EC) and EMC Directive (2014/30/EU). For detailed information, please refer to the full manual or contact DEWALT.