Agri-Fab Lawn Roller
Models: 45-0604, 45-0606
This document provides safety instructions, adjustment guidance, and a parts list for the Agri-Fab lawn rollers.
For more information or assembly tips, visit: ▶️ Video Instruction Guide
Safety Information
Always empty the lawn roller after use to protect it from rust and sub-zero temperatures during winter.
When filling the roller with water, do not connect the hosepipe via a fixed coupling, as this could lead to a dangerous build-up of pressure inside the roller.
Always draw the roller across the face of a slope, never straight up or down.
The braking and traction force of the towing vehicle must be sufficient to handle the extra load imposed by the roller.
Exercise particular care when turning, reducing speed, and coming to a halt.
Plug Adjustment
Instructions for tightening the plug:
- Pull the plug firmly in opposing directions.
- Twist the ring counter-clockwise to tighten.
Note: If the outer washer is not functioning properly, use a pair of needle-nose pliers to ensure it is free.
Repair Parts List
An exploded view diagram shows the components of the Agri-Fab lawn roller. The diagram illustrates the roller drum, handle assembly, wheels, and various fasteners, corresponding to the parts list below.
Item | Part Number | Description | Quantity |
---|---|---|---|
1 | Roller drum | Roller drum | 1x |
2 | 49467 | 1x | |
3 | 6-740BL3 | 2x | |
4 | 43086 | 8x | |
5 | 43182 | 8x | |
6 | 43009 | 2x | |
7 | 44798 | 2x | |
8 | 714-0117 | 3x | |
9 | 2-631BL3 (45-0604) 2-639BL3 (45-0606) | 2x | |
10 | 46782 | 3x | |
11 | 47810 | 5x | |
12 | 43224 | 2x | |
13 | 47623 | 1x | |
14 | 24192BL1 | 2x |
Company Information
Agri-Fab, Inc.
809 South Hamilton
Sullivan, IL. 61951
217-728-8388
www.agri-fab.com
SpeedEPart
The fastest way to purchase parts
www.speedepart.com
Declaration of Conformity
Agri-Fab, Inc. declares that the product(s) identified by model numbers including 45-0604 and 45-0606 conform to relevant EU directives and harmonized standards, including EN 842, EN ISO 4254-1, and EN 1853.