Geotab Telematics Device Quick Start

In the box:

The package contains the following items:

• Telematics Device
• Wiring Harness
• Product Labels (e.g., GA-SAM-PLE-1234, GO10-AAAAAA)
• NOM Logo

Installation:

Follow these steps for installation:

1. Step 1: Locate OBD-II Port

   Identify the Diagnostic Link Connector (DLC) port within the vehicle's cabin, typically under the dashboard near the steering wheel.

   Note: Heavy-duty trucks may use a different DLC. Consult your Authorized Reseller for heavy-duty truck applications or vehicle-specific harnesses.

2. Step 2: Connect Device

   Connect the telematics device to the DLC port using the provided wiring harness.

3. Step 3: Verify Device Status

   Observe the device's indicator lights to confirm its status. A successful connection is indicated by specific light patterns (refer to device documentation for details).

   Device Status Indicators:

   • Power: [Power Symbol]
   • Cellular: [Signal Bars]
   • GPS: [GPS Symbol]
   • Status: [Checkmark Symbol]

4. Step 4: Secure Device

   Mount and secure the telematics device in its designated location.

Verify Install:

Confirm the installation is successful:

1. Step 1: Access Web Portal

   Navigate to www.installmygps.com in your web browser.

2. Step 2: Log Installation Details

   Enter the required information, including Name, Company, and Serial Number (e.g., GA-SAM-PLE-1234), then click 'Log Install'.

3. Step 3A: Device Communicating

   If the device is communicating successfully, you will see a confirmation, such as 'GA-SAM-PLE-1234 Device Communicating' with a checkmark [✔️].

4. Step 3B: Device Not Communicating

   If the device is not communicating, you will see a message like 'GA-SAM-PLE-1234 Device Not Communicating' with an 'X' symbol [❌]. This indicates a potential issue that needs troubleshooting.

Device Dimensions:

The telematics device has the following approximate dimensions:

• Length: 2.95 inches (7.5 cm)
• Width: 1.97 inches (5 cm)
• Height: 0.91 inches (2.3 cm)

Troubleshooting:

If you encounter issues during installation or verification:

• Check all connections are secure.
• Ensure the device is receiving power.
• Verify cellular and GPS signal strength.
• Consult the full user manual or contact Geotab support for further assistance. [❓] [?] [❌]