Home | Lightware Visual Engineering
User Guide for LIGHTWARE models including: HDMI-TPN-TX107, HDMI-TPN-RX107, HDMI-TPN-TX207AU2K, HDMI-TPN-RX107AU2K, HDMI-TPX-RX107A-SR, HDMI-TPX-RX107AU2K-SR, HDMI-TPX Series Transmitter, HDMI-TPX Series, Transmitter, HDMI-TPN-TX107 Transmitter, HDMI-TPN-RX107 Transmitter, HDMI-TPN-TX207AU2K Transmitter, HDMI-TPN-RX107AU2K Transmitter, HDMI-TPX-RX107A-SR Transmitter, HDMI-TPX-RX107AU2K-SR Transmitter
HDMI-TPX-RX107A-SR | SDVoE Point-to-Point Extender
2 days ago — Quick Start Guide. Safety and. Warranty. Info. Quick. Start. Guide. Front and Rear View - HDMI-TPX-RX107A-SR. Front View. Front and Rear View - HDMI-TPX- ...
File Info : application/pdf, 2 Pages, 3.52MB
DocumentDocumentQuick Start Guide HDMI-TPX-RX107A-SR HDMI-TPX-RX107AU2K-SR Front and Rear View - HDMI-TPX-RX107A-SR Front View 1 3 Rear View 567 8 9 q 1 Gigabit Ethernet port 2 USB 2.0 connectors 3 Status LEDs 4 USB HID connectors 5 Audio output 6 Factory reset button 7 HDMI output 1GBase-T RJ45 connector for user Ethernet purpose. USB-A connectors with USB 2.0 support for various types of USB devices (e.g. webcam, microphone, external storage, etc). The signal is transmitted to the receiver over the TPX link. The LEDs give immediate feedback about the current status of the extender. See the details in the Status LEDs section. USB K+M ports for HID-compatible devices (preferably keyboard and mouse). The signal is transmitted to the receiver over the TPX link. 5-pole Phoenix connector for de-embedding the HDMI audio, which can be transmitted as a 2-channel balanced analog audio signal. Hidden button for setting the device to factory default values. HDMI output port with HDMI 2.0 support for sink devices. Ventilation b Pay attention to the ventilation holes when designing the system. Top and side ventilation holes must not be covered. Minimum CAT Cable Requirement Lightware highly recommends using CAT6a AWG24 or higher category 10G Ethernet cables for the TPX (SDVoE) connection between the transmitter and the receiver. Usage of e.g. AWG28 Ethernet cables may reduce the extension distance significantly. Firmware Update Lightware Device Updater (LDU2) is an easy and comfortable way to keep your device up to date. Establish the connection via one of the port of the network switch or directly the Gigabit Ethernet port of the extender. Download and install LDU2 software from the company's website, www.lightware.com, where you can find the latest firmware package as well. Locking DC Plug Twist 90° clockwise to lock. Important Safety Instructions Front and Rear View - HDMI-TPX-RX107AU2K-SR Please read the supplied safety instruction document before using the product and keep it Front View available for future reference. Introduction 1 2 34 The HDMI-TPX series scaling receiver devices with SDVoE technology are Lightware's development allowing users to extend HDMI 2.0 signals up to 4K60 4:4:4 video resolution from a single source to multiple destinations through 10G Ethernet networks. Beyond the benefits of sending high-resolution video over long distances, the extenders are also capable of handling various connectivity standards, including a 1G user Ethernet channel over the 10G link, as well as command injection into RS-232. The additional Gigabit Ethernet ports are also a valuable addition, allowing users to connect an additional device to the network directly through the TPN extender. This is particularly useful for controlling external devices like projectors and displays. HDCP 2.3 and basic EDID management functionality are also among the features offered by these devices, as is their connectivity and easy integration into a wide range of AV operations and with 3rd party devices, such as the Christie Terra projector. Rear View 567 8 9 q The in-built scaler can cater for adjusting the video content to the format of the attached display. Moreover, the scaler is also able to handle glitches in the video arriving at the input of the corresponding transmitter by outputting an uninterrupted HDMI signal. 8 TPX input 9 RS-232 port q 12V DC input RJ45 connector for SDVoE input signal. See more details about the connector in the Power Supply Options and the Status LEDs sections. 3-pole Phoenix connector for bi-directional serial communication. 12V DC input with locking connector for local powering. Status LEDs VIDEO SIGNAL off on (green) POWER/LIVE off blinking between 50% and 100% brightness (green) No video signal present on the HDMI output port. Video signal is present on the HDMI output port. Device is not powered. Device is powered on and operational. TPX INPUT off on (green) blinking (yellow) No connection is established between the transmitter and the receiver units. Connection is established with 10G / 5G / 2.5G bandwith. Link training is in progress. TPX INPUT off blinking (green) No data transmission on the port. Data transmission is active. GIGABIT ETHERNET - LEFT LED on (green) Connection is established with 100Mbps bandwith. blinking (green) Data transmission is active. GIGABIT ETHERNET - RIGHT LED on (green) Connection is established with 1Gbps bandwith. blinking (green) Data transmission is active. Box Contents Receiver device 12V DC adaptor with interchangeable plugs Phoenix® Combicon 3-pole connector Phoenix® Combicon 5-pole connector SWaafertryanatnyd Info Quick Start Guide Safety & Warranty Info; Quick Start Guide Power Supply Options HDMI-TPX-SR series receivers fulfill the PoE PD standard, which means the TPX port can receive power over the Ethernet line. O HDMI-TPX series extenders are not able to send remote power to each other. The TPX series devices can be powered in any of the following ways: 1. Local adaptors for both TX and RX 2. Remote power via network switch CATx (SDVoE) 12V DC power Power adaptor send TRANSMITTER HDMI-TPX series TX 12V DC power adaptor Network switch with PoE capability CATx (SDVoE) Power send CATx (SDVoE) HDMI-TPX series RX TRANSMITTER HDMI-TPX series TX HDMI-TPX series RX Mounting Options For the mounting of the devices Lightware supplies optional accessories for different usages. The device has two mounting holes with inner thread on the bottom side. Fasten the device by the screws enclosed to the accessory. 1U high rack UD Mounting UD Mounting shelf Plate F120 Pro P140 HDMI-TPX-RX107A-SR (3x) (1x) (1x) HDMI-TPX-RX107AU2K-SR (3x) (1x) (1x) 1U high rack shelf provides mounting holes for fastening three 1/3 rack sized units. The UD Mounting Plate F120 makes it easy to mount a single device on any flat surface, e.g. furniture. The UD Mounting Pro P140 makes easy and quick changing of the extenders under the desk available. To order mounting accessories, please contact sales@lightware.com. b Using different (e.g. longer) screws may cause damage to the device. O The extenders are 1/3 rack sized and 1/2 U high. TAKE CARE OF ME I AM THE ONE AND ONLY USER DOCUMENT FOR THIS PRODUCT Lightware Visual Engineering PLC. Budapest, Hungary sales@lightware.com +36 1 255 3800 support@lightware.com +36 1 255 3810 ©2024 Lightware Visual Engineering. All rights reserved. All trademarks mentioned are the property of their respective owners. Specifications are subject to change without notice. Further information on the device is available at www.lightware.com. Doc. ver.: 1.0 19210117 Connecting Steps 4K projector Webcam Active speakers 4x RS-232 HDMI out USB-A Audio out GIGABIT ETHERNET L R 1 2 DEVICE HOST EDID AUDIO OUT HDMI-TPX series transmitter TPX GIGABIT ETHERNET USB 2.0 USB HID 1 2 1 2 3 4 HDMI-TPX-SR series receiver Power USB-A Ethernet Power adaptor Keyboard & mouse Ethernet switch Specification General Compliance....................................................................................................CE, UKCA EMC (Emission).....................................................................EN 55032:2015+A1:2020 EMC (Immunity)...................................................................EN 55035:2017+A11:2020 Electrical safety.................................................................................. EN 62368-1:2020 RoHS .....................................................................................................EN 63000:2018 Warranty ............................................................................................................. 3 years Operating temperature ...................................................0° to +50°C (+32° to +122°F) Operating humidity ......................................................... 10% to 90%, non-condensing Cooling ................................................................................................................passive Power Power supply option ............................................................... Power adaptor / PoE PD Supported power source .........................................................100-240 V AC; 50/60 Hz Power consumption............................................................................................... 22 W Heat dissipation ...............................................................................................75 BTU/h Power Adaptor Supplied power............................................................................................12V DC, 2A AC power plug ............................................ Interchangable (EU, UK, JP/US, AUS/NZ) Compliance................................................................................................. SDVoE AVX HDCP compliance ..........................................................................................HDCP 2.3 Transferred signals..................... Video, Audio, RS-232, Infrared, USB K+M, Ethernet Color space................................................................................................ RGB, YCbCr Video latency (TPX output)............................................0 frame (five lines/ under 8ms) Compression ratio (TPX output)..................................................................... 1.4 to 1 ** Supported resolutions at 8 bits/color * ........................up to 4096x2160@60Hz (4:4:4) Audio formats................... 8-channel PCM, Dolby TrueHD, DTS-HD Master Audio 7.1 Audio Ports Analog audio output Connector type ......................................................................5-pole Phoenix connector Audio formats.........................................................................................2-channel PCM Sampling frequency.............................................................................................48 kHz Signal transmission .............................................................................. Balanced signal * All standard VESA, CEA and other custom resolutions up to 600MHz (HDMI2.0) are supported. ** Compression is applied only if the AV signal is above HDMI 1.4 standard. Mechanical Drawings The following drawings present the physical dimensions of the HDMI-TPX-SR series extenders. Dimensions are in mm. Front View 138 26 GIGABIT ETHERNET USB 2.0 VIDEO USB HID SIGNAL 1 2 1 2 3 4 POWER/ LIVE Bottom View 138 13.5 111 13.5 51.2 151.8 TPX HDMI out Audio out USB-A Ethernet RS-232 Power Connect a CATx cable between the TPX output port of the transmitter and the TPX input port of the receiver. b User Ethernet is also transmitted over the TPN interface, so be sure not to create a network loop. Connect the sink (e.g. 4K projector) to the HDMI output port of the receiver by a HDMI cable. Optionally for analog output: connect an audio device (e.g. active speakers) to the analog audio output port by an audio cable. USB 2.0 ports: connect up to four USB 2.0 devices (e.g. pendrive/ microphone/webcam/etc) to the receiver. USB HID ports: connect up to two USB HID devices to the receiver (preferably mouse and keyboard). O The ports are available in the RX107AU2K-SR model only. Connect the device to a LAN network. b User Ethernet is also transmitted over the TPN interface, so be sure not to create a network loop. Optionally for RS-232: connect a device (e.g. 4K projector) to the RS232 port. Powering on the devices is recommended to do as the final step during the installation. Please check the Power Supply Options section for the details. DC power plug................................................ Locking DC connector (2.1/5.5 mm pin) Enclosure Rack mountable........................................................... yes, with mounting accessories Enclosure material........................................................................................ 1 mm steel Dimensions (mm / inch)....................138 W x 151.8 D x 26 H (5.43 W x 5.97 D x 1 H) Weight....................................................................................................646 g (1.42 lbs) Video Ports HDMI input/output Connector type ...........................................................19-pole HDMI Type A receptacle AV standard ...................................................................................... DVI 1.0, HDMI 2.0 HDCP compliance ..........................................................................................HDCP 2.3 Color space................................................................................................ RGB, YCbCr Supported resolutions at 8 bits/color * ........................up to 4096x2160@60Hz (4:4:4) Audio formats................... 8-channel PCM, Dolby TrueHD, DTS-HD Master Audio 7.1 CEC support .................................................................................................transparent TPX input Connector type ..................................................................................... RJ45 connector Power over Ethernet..................................................................PoE PD (IEEE802.3af) Data rate ...................................................................................................... 10GBase-T USB Ports (only for RX107AU2K-SR model) USB-A port Connector type ..................................................................................Type-A receptacle Number of ports............................................................................................................6 USB compliance ............................................................................................... USB 2.0 Power supplement of USB 2.0 ports .................................................................5V, 1.7A Power supplement of USB HID ports................................................................5V, 0.3A Max current supplement per USB-A port ...................................................................1A Control Ports Ethernet port Connector type ......................................................................... RJ45 female connector Number of ports............................................................................................................2 Ethernet data rate...............................................1GBase-T, full duplex with autodetect Power over Ethernet (PoE) ..................................................................... Not supported RS-232 serial port Connector type ......................................................................3-pole Phoenix connector Default settings...................................................................................9600 BAUD, 8N1 M3 thread Port Diagram The following port diagram describes the USB signal routes of the HDMI-TPX-RX107AU2K-SR and the HDMI-TPX-TX209AU2K models. Receiver (RX) Transmitter (TX) USB data of "USB 2.0" ports USB 2.0 USB HID USB data of "USB HID" ports IP packetizer TPX input IP packages TPX output IP packages USB data of "Device" ports 4-port USB HUB USB data of "USB 2.0" ports IP depacketizer USB data of "USB HID" ports Device Host Software Control BlueRiver AV Manager HDMI-TPN series are supported by BlueRiver AV Manager control software. It is available for download from mySemtech on Semtech.com. The software can be installed on Windows or Linux operation systems as well. Running the Software After installation the BlueRiver AV Manager is running in any web browser application and can be launched by typing the 127.0.0.1 IP address in the URL bar. The following administration tools are available in the software: Device monitoring on the network Crosspoint settings and audio routing EDID settings Network settings RS-232 port configuration Command injection Configuration of the integrated scaler Limitations of the Scaler Bandwidth Related Limitations The scaler function has bandwidth limitation, which in the practice means that the compression of the original picture is not possible below specific settings. When the scaling is not applicable, the error symptoms could be a flashing screen or displaying a black screen. The following resolutions cannot be scaled while keeping the aspect ratio: 3840x2160 to 640x480; 800x600; 960x1280; 1024x768; 1050x1400; 1200x1600 4096x2160 to 1280x768; 1680x1050; 1200x1900 Color Space / Color Depth Related Limitations If the scaler function is enabled in the receiver, the output is always RGB 8 bit/channel.