FSP100-50FAB Power Supply Appearance and Wiring Diagram
Document Overview
This document provides the appearance and assembly details for the FSP100-50FAB power supply unit, manufactured by FSP Technology Inc. (全漢企業股份有限公司). The document number is OAD-00005910, and the part number is 9PA1002101.
The design is based on a standard product, with the addition of a flat bracket and an EAN code area.
Appearance Diagram
The appearance diagram illustrates the overall physical layout of the FSP100-50FAB power supply. Key dimensions are provided, such as -150.00 mm [-5.91 inches], -40.50 mm [-1.59 inches], and -81.50 mm [-3.21 inches]. Airflow direction is indicated by arrows.
The unit features designated areas for a Bar Code and an EAN Code.
Connector and Wiring Details
The document details the wiring for several connectors:
- CON1: A 10-pin connector.
- CON3: A 4-pin connector.
- PA: A 4-pin connector.
- PB: A 4-pin connector.
- PC: A 4-pin connector.
The following table provides a comprehensive list of pin assignments, wire colors, connector types, gauge, and cable lengths for these connections.
Wire List
| Pin Ref. ID. | Signal | Wire Color | Connector | Gauge | Type | Cable Length |
|---|---|---|---|---|---|---|
| P1 | +3.3V | ORANGE | MOLEX 39-01-2200 | 22 | 200±15mm | |
| P1 | +3.3V | ORANGE | MOLEX 39-01-2200 | 22 | ||
| P1 | COM | BLACK | MOLEX 39-01-2200 | 22 | ||
| P1 | +5V | RED | MOLEX 39-01-2200 | 22 | ||
| P1 | COM | BLACK | MOLEX 39-01-2200 | 22 | ||
| P1 | +5V | RED | MOLEX 39-01-2200 | 22 | ||
| P1 | COM | BLACK | MOLEX 39-01-2200 | 22 | ||
| P1 | PW-OK | GRAY | MOLEX 39-01-2200 | 24 | ||
| P1 | +5Vsb | PURPLE | MOLEX 39-01-2200 | 24 | ||
| P1 | +12V | YELLOW | MOLEX 39-01-2200 | 22 | ||
| P1 | +3.3V | ORANGE | MOLEX 39-01-2200 | 22 | ||
| P1 | +3.3Vsense | BROWN | MOLEX 39-01-2200 | 24 | ||
| P1 | -12V | BLUE | MOLEX 39-01-2200 | 24 | ||
| P1 | COM | BLACK | MOLEX 39-01-2200 | 22 | ||
| P1 | PS-ON | GREEN | MOLEX 39-01-2200 | 24 | ||
| P1 | COM | BLACK | MOLEX 39-01-2200 | 22 | ||
| P1 | COM | BLACK | MOLEX 39-01-2200 | 22 | ||
| P1 | COM | BLACK | MOLEX 39-01-2200 | 22 | ||
| P2 | +5V | RED | MOLEX 39-01-2040 | 22 | 310±15mm | |
| P2 | COM | BLACK | MOLEX 39-01-2040 | 22 | ||
| P2 | +12V | YELLOW | MOLEX 39-01-2040 | 22 | ||
| P2 | +12V | YELLOW | MOLEX 39-01-2040 | 22 | ||
| PA | +3.3V | ORANGE | AMP 171822-4 | 22 | ||
| PA | COM | BLACK | AMP 171822-4 | 22 | ||
| PA | +5V | RED | AMP 171822-4 | 22 | ||
| PA | +12V | YELLOW | AMP 171822-4 | 22 | ||
| PB | +5V | RED | WST SD-67582-001 | 22 | 150±10mm | |
| PB | COM | BLACK | WST SD-67582-001 | 22 | ||
| PB | +12V | YELLOW | WST SD-67582-001 | 22 | ||
| PB | +12V | YELLOW | WST SD-67582-001 | 22 | ||
| PC | +5V | RED | AMP 171822-4 | 24 | 150±10mm | |
| PC | COM | BLACK | AMP 171822-4 | 24 | ||
| PC | COM | BLACK | AMP 171822-4 | 24 | ||
| PC | +12V | YELLOW | AMP 171822-4 | 24 |
Technical Notes
Note 1: All the length of output wires exclude housing.
Note 2: Tolerances are specified as: .XX=±0.5 [0.02], .XXX=±0.25 [0.01].
Units are provided in millimeters [inches].
