Test Setup Photos of the EUT

Test Setup Photo(s) of Radiated Emissions Measurement

The following figures illustrate the test setup for radiated emissions measurement.

Fig. 1

Description: A black wireless speaker is positioned on a white, glossy surface within a testing chamber. The chamber walls and ceiling feature a distinct grid pattern. The speaker is placed centrally on the surface.

Fig. 2

Description: The same black wireless speaker is shown, this time elevated on a white foam block which rests on a white, glossy surface. The testing chamber environment, with its grid-patterned walls and ceiling, remains consistent.

Test Setup Photo(s) of Conducted Emissions Measurement

The following figure illustrates the test setup for conducted emissions measurement.

Fig. 3

Description: A black wireless speaker is connected via cables to electronic testing equipment situated on a wooden table. In the background, a metal testing rack is visible. This setup is used to measure conducted emissions.