Nordtronic
Installation Guide for Nordtronic models including: Box Relay Zigbee
This Zigbee device is a wireless receiver that communicates with a variety of Zigbee compatible systems. This receiver.
Monteringsvejledning/ Monteringsanvisning/ Montasjeanvisning/ Installation instructions/ Installationsanleitung/ Asennusohje 98423051 02-2021
File Info : application/pdf, 2 Pages, 1.11MB
DocumentDocumentBox Relay Zigbee Monteringsvejledning/ Monteringsanvisning/ Montasjeanvisning/ Installation instructions/ Installationsanleitung/ Asennusohje puswshitch 45 mm 20,5 mm Item no.: 98423051 A1-A2: 8-230V Reset Max. load N 200/400W OUT AC 100-240V L LN N L 45,5 mm Connect with 8-230V ~ push switch "Reset" key: for network pairing, touchlink, factory reset of the switch, turn on/off the load puswshitch Item no.: 98423051 A1-A2: 8-230V Reset Max. load N 200/400W OUT AC 100-240V L LN N L LED indicator 1 CH 100-240VAC output AC 100-240V power input Input voltage 100-240VAC Output voltage 100-240VAC Output current Max. 1.8mA Load symbol Compatible load types Load type Maximum load Remarks LED lamps with transformers LED drivers 200W @ 220V 100W @ 110V 200W @ 220V 100W @ 110V Due to variety of LED lamp designs, maximum number of LED lamps is further dependent on power factor result when connected to switch Maximum permitted number of drivers is 200W divided by driver nameplate power rating Incandescent lighting, HV Halogen lamps 400W @ 220V 200W @ 110V Low voltage halogen lighting with electronic transformers 200W @ 220V 100W @ 110V Operation 1. Do wiring according to connection diagram correctly. 2. This Zigbee device is a wireless receiver that communicates with a variety of Zigbee compatible systems. This receiver receives and is controlled by wireless radio signals from the compatible Zigbee system. 3. Zigbee network pairing through coordinator or hub (Added to a Zigbee network) Step 1: Remove the device from previous Zigbee network if it has already been added to, otherwise pairing will fail. Please refer to the part "Reset factory settings manually". Step 2: From your Zigbee controller or hub interface, choose to add lighting device and enter pairing mode as instructed by the controller. puswshitch Item no.: 98423051 A1-A2: 8-230V Reset Max. load N 200/400W OUT AC 100-240V L LN N L Step 4: Connected light will blink 5 times and then stay solid on, then the device will appear in your controller's menu as BoxRelayZ 98423051 and can be controlled through controller or hub interface. N L Step 3: power on the device, it will be set into network pairing mode (connected light flashes twice slowly), the network pairing mode will last until the device is added to a Zigbee network. >>>>> 100-240 On/Off VAC RoHS Nordtronic A/S | Flade Engvej 4 | DK - 9900 Frederikshavn | Denmark | CVR: 29808708 | Tel: +45 70209531 | www.nordtronic.com Find the updated manual on our website - www.nordtronic.com With reservation for typing errors 98423051 02-2021 Box Relay Zigbee Monteringsvejledning/ Monteringsanvisning/ Montasjeanvisning/ Installation instructions/ Installationsanleitung/ Asennusohje 4. Reset factory settings manually Note: All configuration parameters will be reset after the device is reset or removed from the network. Wiring diagram puswshitch pusswhitch Item no.: 98423051 A1-A2: 8-230V Reset Max. load N 200/400W OUT AC 100-240V L LN N L Step 1: short press "Reset." key for 5 times continuously or re-power on the device for 5 times continuously if the "Prog." key is not accessible. N L Step 2: Connected light will blink 3 times to indicate successful reset. Item no.: 98423051 A1-A2: 8-230V Reset Max. load N 200/400W OUT AC 100-240V L LN N L L N Push Push 100-240 On/Off VAC RoHS Nordtronic A/S | Flade Engvej 4 | DK - 9900 Frederikshavn | Denmark | CVR: 29808708 | Tel: +45 70209531 | www.nordtronic.com Find the updated manual on our website - www.nordtronic.com With reservation for typing errors 98423051 02-2021