Configure the Wi-Fi Repeater Mode

Configure the Wi-Fi Repeater Mode

This is the easiest way to configure the AP/Router to be used as a Wi-Fi Repeater. First, check whether your wireless router supports “WPS.” For further details, please read the operating instructions for your wireless router.

Quick and Easy

1. The mode selector must be set to the “AP/REPEATER” position for REPEATER MODE.
2. Plug the AP/Router into a wall socket.
3. Press the WPS button on the AP/Router for at least 6 seconds (the Wi-Fi / WPS LED now flashes for approx. 2 minutes).
4. Within these 2 minutes, please press the WPS button on your Wireless Router directly for 2-3 seconds (for further details / instructions, please read the operating instructions of your current Wi-Fi router).

The AP/Router will automatically connect to your wireless router and copies all wireless keys / settings. The AP/Router can be accessed via the SSID and the wireless key of your wireless router.

You can also configure the Wi-Fi Repeater Mode by connecting it with your computer/laptop with enclosed RJ-45 cable or wirelessly.

Configure the Wi-Fi Repeater Mode wirelessly

1. The mode selector must be set to "AP/Repeater" position for Repeater Mode. Plug the AP/Router into a wall socket.
2. Click on the network icon (Ethernet or Wireless icon) on the bottom right of your tool bar of your desktop. Identify and Connect to the signal titled "Wireless-AC" – this will take a few seconds.
3. Open Web Browser and type: http://192.168.10.1 or http://ap.setup in the URL box of your browser. This number is the default IP address for this AP/Router device.
4. Once on the set-up URL page, a log-in screen will appear. Enter the User Name and Password and then click submit.
   A. Default User Name = admin
   B. Default Password = admin
5. After logging in, you will see the webpage like the below: a. Click on the REPEATER button in the set-up wizard.
6. From the list, select a wireless network with which you want to connect the AP/Router by choosing the corresponding network in the “select” field.
7. After having selected a wireless network, you must then specify the network key of your wireless router – same as current Wireless Router security key.
8. After completing the entry, click apply button. The device will reboot and upon completion of reboot, the AP/Router is now accessible under the same SSID and Wireless key of your wireless router.