CR1100 & CR1500 Barcode Readers Configuration

This section details how to configure the CR1100 or CR1500 barcode readers for assignment to a patient room or workstation-on-wheels. Users should scan one of the provided barcodes to complete the configuration.

Configuration Barcodes:

• CC004395_02: Epic Patient Look up
• CC005888_01: Epic Alt Keypad Emulator

CR100 and CR1500 Reader Settings

This part of the guide covers essential reader settings for the CR100 and CR1500 models. It includes instructions for resetting the reader to factory defaults.

Reader Settings Barcode:

• M20111_01: Reset to factory defaults

CR1500 Feedback Settings

For the CR1500 model, specific feedback settings can be configured. Note that these settings are not applicable for the CR1100.

Feedback Settings Barcodes:

• M20329_01: Beep On, Vibrate On
• M20331_01: Beep On, Vibrate Off
• M20330_01: Beep Off, Vibrate On

Firmware Version Information

Scan the following barcodes to identify the firmware versions of your Code readers.

Firmware Information Barcodes:

• M20361_01: Reader information