Instruction Manuals: Safety and Compliance Information

Product: S3240C-24T

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

CE Compliance

CE Warning: This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

FS.COM GmbH hereby declares that this device is in compliance with the Directive 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863. A copy of the EU Declaration of Conformity is available at www.fs.com/company/quality_control.html.

UKCA Compliance

Hereby, FS.COM Innovation Ltd declares that this device is in compliance with the Directive SI 2016 No. 1091, SI 2016 No. 1101 and SI 2012 NO. 3032.

ISED Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES (A) / NMB (A).

WEEE Compliance

This appliance is labelled in accordance with European Directive 2012/19/EU concerning waste electrical and electronic equipment (WEEE). The Directive determines the framework for the return and recycling of used appliances as applicable throughout the European Union. This label is applied to various products to indicate that the product is not to be thrown away, but rather reclaimed upon end of life per this Directive.

[crossed-out wheeled bin symbol]

Ground Conductor

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.

A power cord connected to a socket-outlet with earthing connection.

	FS N8520-32D Safety and Compliance Information Manual This document provides safety and compliance information for the FS N8520-32D, including FCC, CE, UKCA, ISED, WEEE regulations, and lithium battery warnings.
	FS S3240C Series Switches Quick Start Guide - Installation and Configuration A concise guide to installing and performing the initial configuration of FS S3240C Series Network Switches, covering hardware, connections, and basic setup.
	FS-BOX-V4 Firmware Upgrade Tool Kit Quick Start Guide Quick start guide for the FS-BOX-V4 Firmware Upgrade Tool Kit, detailing its features, supported transceivers, connection methods (APP/USB), hardware operations, and safety information. Compatible with FS Transceivers & DAC/AOC Cables.
	FS S8050-20Q4C 40G IP Storage Switch Datasheet Datasheet for the FS S8050-20Q4C, a high-performance Ethernet switch designed for next-generation Metro, Data Center, and Enterprise network requirements. Features include L2/L3 capabilities, comprehensive protocols, and flexible software options for rapid service deployment and management.
	FS.COM AmpCon-Campus User Manual V2.2.0 - Network Management Platform Comprehensive user manual for the FS.COM AmpCon-Campus Management Platform, version 2.2.0. It details features for automated campus network deployment, management, monitoring, and automation using ZTP and Ansible.
	FS S2805S Series Gigabit Smart Managed Switches Datasheet Datasheet for FS S2805S Series Gigabit Smart Managed Switches, designed for essential network needs of SMBs. Features include Layer 2 capabilities, robust security, enhanced QoS, and easy management. Available models: S2805S-8TF-P and S2805S-8TF.
	FSOS NVGRE Command Line Reference for FS S5800-8TF12S Switch This document provides a comprehensive reference for FSOS NVGRE commands on the FS S5800-8TF12S network switch. It details configuration, syntax, and usage for managing NVGRE tunnels and related features.
	IxNetwork RFC2544 Throughput and Latency Test Report for S5800-24T8S Switch Detailed report of RFC2544 throughput and latency testing performed on the S5800-24T8S Switch using IxNetwork, covering frame loss, transmission rates, and latency measurements across various frame sizes.