Sony HT-S100F/SF150 Sound Bar Startup Guide
This guide provides essential steps for setting up your Sony sound bar.
What's in the box
- Sound Bar (1)
- Remote control (1)
- Battery (2)
- Optical digital cable (1)
- AC power cord (mains lead) (1)
- WALL MOUNT TEMPLATE (1)
- Operating Instructions
- Startup Guide (this document)
1. Connecting with a TV
Are there any HDMI IN jacks labeled "ARC" on your TV?
YES
Use an HDMI cable (not supplied) to connect an HDMI IN jack on your TV and the HDMI OUT (TV (ARC)) jack on the Bar Speaker. Make sure that the cable is firmly inserted.
Diagram shows TV and Bar Speaker connected via HDMI cable, with labels for HDMI IN (ARC) on TV and HDMI OUT (TV (ARC)) on Bar Speaker.
NO
When your TV does not have an HDMI IN jack labeled "ARC," you also need to connect the TV and the Bar Speaker via the optical digital cable (supplied) as instructed in step. There will be no sound output from the TV if the TV and the Bar Speaker are connected only via the HDMI cable.
Diagram shows TV and Bar Speaker connected via HDMI cable and an optical digital cable. Labels indicate HDMI IN on TV, HDMI OUT (TV (ARC)) on Bar Speaker, and OPTICAL OUT on TV connecting to TV IN (OPTICAL) on Bar Speaker.
Note: Check the shape of the optical digital cable's connectors and the jacks on the TV and the Bar Speaker. Insert the connectors into the jacks in the right directions. If you forcibly insert the connectors in the wrong directions, the connectors and the jacks may be damaged.
2. Setting up the remote control
Diagram shows a remote control with batteries being inserted.
3. Turning on the TV
Diagram shows a TV being turned on with its remote control.
4. Turning on the Bar Speaker
- Connect the AC power cord (mains lead) to the Bar Speaker and then connect the AC power cord (mains lead) to the AC outlet (mains).
- Press [power] on the remote control of the Bar Speaker. After the TV, BLUETOOTH and USB indicators light up in sequence for a few seconds, only the TV indicator lights up.
Note: Do not place magnetic cards on the Bar Speaker or near the Bar Speaker.
5. Listening to the sound
- Make sure that the TV indicator on the Bar Speaker lights up.
- When the TV indicator on the Bar Speaker does not light up, press INPUT on the remote control of the Bar Speaker to select the TV input.
- Adjust the volume by pressing +/- on the remote control of the Bar Speaker.
Note: Depending on the order in which you turn on the TV and the Bar Speaker, the Bar Speaker may enter muting mode. In this case, turn on the TV first, then the Bar Speaker.