996978

Technical Specifications

Package Contents

• 1x Remote Control
• 7x 1.5V AAA Batteries
• 4x Mounting Screws
• Mounting Brackets
• LED Boards (as specified above)

Installation Instructions

1. Step 1: Mount Bracket

   Secure the mounting bracket to the ceiling using the provided screws. Ensure the bracket is level and firmly attached. The diagram shows drilling holes and attaching a bracket to a ceiling surface.

2. Step 2: Wire LED Boards

   Connect the LED boards. The diagram illustrates wiring terminals labeled 'a' and 'b', indicating 'a=N' (Neutral) and 'b=L' (Live) connections for the main power supply. Ensure correct polarity and secure connections.

3. Step 3: Attach LED Boards

   Attach the LED boards to the mounted bracket using screws. The diagram shows the LED boards being secured to the bracket.

4. Step 4: Connect Power and Mount Fixture

   Connect the main power supply to the fixture. Then, attach the main light fixture to the mounting bracket.

5. Step 5: Secure Fixture

   Ensure the fixture is firmly attached to the mounting bracket.

6. Step 6: Install Remote Batteries

   Install batteries into the remote control. Open the battery compartment, insert 7x 1.5V AAA batteries, and close the compartment. The diagrams show the process of opening the compartment and inserting batteries.

7. Step 7: Operation and Pairing

   The diagram shows a control interface with '0' (Off) and '1' (On) indicators, suggesting power control. It may also indicate pairing or mode selection for the remote control.

Declaration of Conformity

This device fulfils the fundamental requirements of Directive 2014/53/EU (Radio Equipment Directive) of the European Parliament and of the Council of the European Union dated 16.04.2014 on items of radio equipment.

The full declaration of conformity can be accessed at the Internet-address given below:

https://scm.paul-neuhaus.de/public/conformity/