User Guide for hohem models including: 3-Axis Stabilizing Gimbal Compact Digital Camera
02 Pan600° 1 5 7 8 6 9 10 2 3 4 12 13 11 16 1/4 Inch Screw Hole 1. Tilt Motor 2. Thumb Screw 1 3. Mini USB（camera control) 4. Pan Motor 5. Bluetooth Light 6. Joystick
Tilt Motor. 2. Thumb Screw 1. 3. Mini USB（camera control). 4. Pan Motor. 5. Bluetooth Light. 6. Joystick. 7. Slider. 8. Mode Light. 9. Mode Button. 10.
File Info : application/pdf, 16 Pages, 3.68MB
DocumentDocumentMulti 3-Axis Stabilizing Gimbal for Compact Digital Camera User Guide V1.0 @Hohem-Tech Get more tutorial video Product Overview Tilt 320° 1 2 3 4 5 8 6 7 9 10 11 Roll 320° 12 13 14 15 Pan 600° 16 1/4 Inch Screw Hole 1.Tilt Motor 2.Thumb Screw 1 3.Mini USBcamera control) 4.Pan Motor 5.Bluetooth Light 6.Joystick 7.Slider 8.Mode Light 9.Mode Button 10.ON/OFFShutter Button 11.HandleBatter y inside 12.Roll Motor 13.Quick Release Plate 14.Thumb Screw 2 15.Quick Release Plate Bolt 16.Power Indicator Light 02 17 18 19 20 17.Thumb Screw 3 18.1/4 Inch Screw Hole 1 19.Trigger Button 20.USB Por t 21.1/4 Inch Screw Hole 2 21 03 Accessories List Tripod*1 Quick Release Plate*1 Smartphone Holder*1 SONY Multi Camera Control Cable*1 Micro USB Charging Cable*1 Carry Case*1 Thumb Screw *2 User Guide*1 04 Camera/Phone Mounting CAUTION Please mount your camera/phone before turning on the gimbal. Camera Mounting: * Some action cameras must add an adaptor with 1/4 screw hole. 1. Mount the quick release plate on camera. 2. Insert the camera with quick release plate(A) into the slot of clamping plate(B) and tighten the thumb screw A B Supported Cameras: 1.Digital Camera: SONY RX100 series, Canon G series,Panosonic DMC-LX10 2.Action Camera: GoPro Hero series, SONY RX0 series, SONY X300, YI CAM, SJCAM 3.Payload: 400g Phone Mounting: 1.Mount the phone holder on the quick release plate with thumb screw. 2. Insert the phone holder with quick release plate into the slot of clamping plate and mount your phone on the holder, then tighten the quick 05 Balancing It is recommended to turn on the camera before balancing it on the gimbal. 3.Balance the camera through left and right Slide the roll arm to balance the camera through left and right, tighten the thumb screw after the camera is well balanced. 2.Balance the camera through up and down 3 2 1.Balance the camera 2.through front and back Rotate the tilt axis so that the camera lens is pointing forward, balance the camera through up and down by sliding the tilt arm and tighten the thumb screw after the camera is well balanced. 1 Slide the quick release plate through front and back to balance the camera, tighten the thumb screw after the camera is well balanced. 06 Slider: *Zoom in & out(SONY Multi cable is require to get connection with SONY camera on this function. *Focus (It is available when gimbal is connected with app for smar tphone. ON/OFF (Long press for 3s) Shutter: Tap to take photo/Double tap to record SONY Multi cable is require to get connection with SONY camera on this function; For smartphone mounted on the gimbal,this function is available when gimbal is connected with app. 08 App "Hohem Gimbal" Instruction Scan QR code to download the app. Hohem Gimbal supports iOS 9.0 and Android 5.0 or above. Search for 'Hohem Gimbal' in the App Store or Google Play and follow the instructions to install the app. Bluetooth Connection: 1. Enable the bluetooth of smartphone and turn on the gimbal.Make sure the device is mounted on the gimbal 2. Open the App "Hohem Gimbal" and choose the correct product model "iSteady Multi"to connect. 3. Choose the correct device to enter into(For compact camera and action camera mounted,click "camera" to enter; For smartphone mounted,click "phone" to enter. It allows to connect the bluetooth of smartphone for mounting smartphone on gimbal.Enter the smartphone bluetooth list to search signal "Smartphone Gimbal" to connect the gimbal, which enables the gimbal to control the original phone camera to take phone and record video. FAQFail to connect the bluetooth on smartphone or app? 1. Reset network setting. 2. Disable WiFi and cancel the pairing of "Smartphone Gimbal" connection. 3. Reconnection 09 Enter into the main function interface of smartphone in the App 10 App "Hohem Gimbal" Instruction Enter into the main function interface of smartphone in the App 1 9 2 10 3 11 4 12 5 78 6 13 11 1.Home 2.Setting 3.Front/Rear camera 4.Flash 5.Camera Setting 6.Album 7.Object Tracking 8.Zoom & Focus 9.Bluetooth 10.Face Tracking 11.Shutter Button 12.Panorama 13.Motion Timelapse App "Hohem Gimbal" Instruction Other App Functions 1.Gimbal Specs Setting A.Following Speed To adjust the following speed of pan/tilt/roll axes B.Joystick Speed To adjust the rotating speed by control the joystick C.Following Dead AreaNo following movement when the rotate angle is less than dead area setting D.TrimTo adjust the tilt/roll axis in small angle to get a perfect balance E.Joystick ReverseTo reverse the rotation direction by control the joystick F.Motor TorsionTo adjust the motor torsion of pan/tilt/roll axes, which is useful to solve the vibrate issue due to lightweight or overweight mobile phone 2. Firmware UpgradeThe firmware is subject to upgrade without a fixed schedule. Firmware upgarde is help to optimize the working of gimbal, please refer to page 14 for details. 3. CalibrationIt requires to calibrate the gimbal only when you notice any kind of not level or drift on any of the axes, please refer to page 13 for details. 4.Operation InstructionFor any questions, please refer to the user guide for details, the content is subject to change without prior notice. 12 Calibration It requires to calibrate the gimbal if you notice it is not work properly as below. 1.The pitch angle is not level with the horizontal surface. 2.The roll angle is not parallel to the horizontal surface. 3. The pan axis drifts when the gimbal is on all lock mode. Calibration Instruction Method 1Off-line Calibration 1Power on the gimbal, long press the mode button over 6 seconds till the mode light on. 2Laying the gimbal on a static flat surface without any vibrate. Calibration is completed once the mode light flash twice. *if the off-line calibration is not useful, please refer to Method 2 Method 26-Side Calibration Via App Please make sure the gimbal is connected with app via bluetooth successfully, then enter "Calibration" and follow the instruction in the app to calibrate the gimbal. 13 Firmware Upgrade Please make sure the gimbal is connected with app via bluetooth successfully, then enter the "Firmware Upgrade" and follow the instruction to upgrade the latest firmware. FAQ Q: Why the gimbal vibrates after powering on? A: Make sure your camera is mounted firmly and well balanced before powering on the gimbal, do not turn on the gimbal without a balanced load, as doing so many damage the motors, please refer to page 5. 6 for more details. For some lightweight mobile phone, it needs to adjust the motor torsion, please refer to page 12 for details. Q: How to connect the gimbal via app? A:Please be noted that the bluetooth and gimbal must be connected directly in the app "Hohem Gimbal", rather than connecting in the smar tphone bluetooth list. Make sure all the permission is allow when you open the app for the first time. Please refer to the tutorial video on our YouTube channel for more details. Q: How to do if the gimbal is not level or drift after powering on A: Please refer to page 13 for details. 14 Parameters Weight Main Material Payload Supported Devices 530g include battery High performance composite 400g 1.Digital Camera: SONY RX100 series, Canon G series, Panosonic DMC-LX10 2.Smartphone: iPhone series and Android phone. 3.Action Camera: GoPro Hero series, SONY RX0 , SONY X3000, YI CAM, SJCAM Battery Capacity Working Time Charging Time Mechanical Range 3600 mAh 8 hours 3.5 hours Panning600° Rolling320° Tilting320° Working Temperature -10~45 Motors Protection Standard Accessories Gimbal is able to power off automatically due to improper operation of the motors. Tripod*1;Quick Release Plate*1;Smar tphone Holder*1; SONY Multi Camera Control Cable*1; Micro USB Charging Cable*1; Carry Case*1; Thumb Screw *2 15Corel PDF Engine Version 17.1.0.572 CorelDRAW X7