SINGSATION CLASSIC KARAOKE SYSTEM + WIRELESS SPEAKER

Step 1: Unpack

Make sure the following items came in this package:

• Singsation Classic Karaoke System + Wireless Speaker
• Microphone
• AC Adapter

Step 2: Plug in

Attach one end of the AC adapter to the DC IN jack on the back of the Singsation Classic. Plug the other end of the adapter into a working outlet or surge protector.

Step 3: Turn on

Press and hold the [Power Button] ⏻ on the front of the Singsation Classic to turn it on. The Singsation Classic plays its startup sound and the [Bluetooth Icon] ⊛ indicator starts blinking slowly.

Note: If you didn't hear the startup sound, make sure the MASTER VOLUME knob is turned up!

After 15-30 seconds, the Singsation Classic announces “Pairing” and goes to Bluetooth pairing mode to set up with your Bluetooth device. The [Bluetooth Icon] ⊛ indicator starts blinking faster.

Step 4: Pair + Connect

Enable Bluetooth on your smartphone or other Bluetooth device.

Make sure the [Bluetooth Icon] ⊛ indicator on the front of the Singsation Classic is blinking rapidly. (If it isn't, give a short double-press on the [Bluetooth Icon] ⊛ button. The Singsation Classic announces "Pairing.")

If you've previously paired your phone or other Bluetooth device with the Singsation Classic, it will automatically attempt to reconnect to that device when you switch it on. If you want to pair to a new device, give a short double-press to the [Bluetooth Icon] ⊛ button. The Singsation Classic announces “Pairing” and the [Bluetooth Icon] ⊛ indicator starts blinking.

Choose Singsation Classic from the pairing options on your Bluetooth device. (If it's not in the list, choose "Scan" from your device's Bluetooth menu.)

The Singsation Classic announces “Device Connected” when it's finished pairing and connecting to your Bluetooth device. The [Bluetooth Icon] ⊛ indicator turns solid blue.

Note: The process of enabling Bluetooth and connecting varies from device to device. See your device's owners manual for more information and specific instructions.

Bluetooth Wireless Connection Tips

• Make sure the Bluetooth capability of your device is turned on.
• Make sure there's nothing plugged into the Singsation Classic's AUX IN jack when you're trying to use Bluetooth.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your device's Bluetooth performance, etc. If you're having problems connecting to the speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.

Step 5: Sing along!

The Singsation Classic comes with a microphone you can use to sing along or make announcements!

To sing along: Plug the provided microphone into the MIC 1 IN jack on the front of the Singsation Classic. Start playing music on your Bluetooth device and start singing!

Volume Control:

• To adjust the volume of your voice: Use the MIC 1 volume knob on the Singsation Classic.
• To adjust the volume of your music: Use the volume controls on your Bluetooth device.
• To adjust the volume of everything: Use the MASTER VOLUME knob on the Singsation Classic.

To use a second mic: Plug a second mic (not included) into the MIC 2 IN jack on the front of the Singsation Classic. Use the MIC 2 volume knob to control its volume.

Fun with Voice Effects

• To change voice effects: Press the VOICE FX button. Keep pressing to try all the effects!
• To adjust the level of the echo effect: Press the LEVEL button just below the VOICE FX button. It cycles through the levels for the echo effect.

Using EQ

The Singsation Classic has an EQ button that lets you select one of the preset equalization settings (Rock and Voice) that automatically adjust the equalization to enhance the sound for each situation.

To use one of the preset EQ settings: Press the EQ button to cycle through the presets until you reach the setting you want to use.

Using Dynamic Lighting

The LIGHTING button on front of the Singsation Classic gives you control over the Classic's built-in dynamic lighting. Press the LIGHTING button to cycle through the multiple lighting modes:

Lighting Modes:

• Party 1 and 2: The light changes colors to the beat of the music (1) or mic (2).
• Dance 1 and 2: The light pulses and changes color to the beat of your music (1) or mic (2).
• Chill: The light gradually intensifies and diminishes and changes color.
• Breathe: The light gradually intensifies and diminishes on a single color. Press the COLOR button to change colors.
• Still: The light stays on. Press the COLOR button to select a color.
• Disco: The light slowly goes through all the colors.
• Rave: The light goes through the colors at lightning speed. Press the COLOR button to change colors.
• Off: Turns the lighting off.

Tour of the Singsation Classic (Control Descriptions)

The front panel features a large central MASTER VOLUME dial. Above it are POWER ⏻, MUSIC EQ ?️, PLAY/PAUSE ▶️⏸️, and BLUETOOTH ⊛ buttons. To the right of the MASTER VOLUME dial are VOICE FX and LEVEL buttons. Below these are LIGHTING and COLOR buttons. Smaller MIC 1 and MIC 2 volume knobs are located below the main dial. The speaker grill is centrally located. MIC 1 IN and MIC 2 IN microphone jacks are at the bottom. The BLUETOOTH indicator light is near the BLUETOOTH button, and the AUX indicator light is near the POWER button.

Button/Indicator Descriptions

• BLUETOOTH Indicator: Shows Bluetooth status (solid = connected; fast blinking = pairing; slow blinking = connecting).
• AUX Indicator: Illuminates when an audio source is plugged into the AUX IN jack.
• POWER Button ⏻: Turns the speaker on/off.
• MASTER VOLUME Dial: Adjusts the speaker's overall volume.
• VOICE FX Button: Cycles through available voice effects.
• MUSIC EQ Button ?️: Cycles through preset equalization settings (Rock, Voice).
• LEVEL Button: Cycles through echo effect levels.
• PLAY/PAUSE Button ▶️⏸️: Starts or pauses Bluetooth audio playback.
• LIGHTING Button: Controls multi-mode lighting.
• BLUETOOTH Button ⊛: Reconnects to the last source (single press) or starts pairing (double press).
• COLOR Button: Changes light color in select modes.
• MIC 1 & MIC 2 Volume Dials: Adjust volume for respective microphone inputs.
• MIC 1 & MIC 2 IN Jacks: Connect up to two microphones.
• AUX IN Jack: Connects external audio devices via 3.5mm cable.

90-Day Limited Warranty

Voxx Accessories Corporation provides a 90-day limited warranty covering material and workmanship defects. Warranty covers repair or replacement with new or reconditioned product. Exclusions include damage from alteration, improper installation, misuse, accident, moisture, or unauthorized AC adapters. Liability is limited to repair/replacement or purchase price. Implied warranties are limited to the duration of this warranty.