STORKLINTA 6-Drawer Dresser Assembly Instructions

Assembly Steps

Step 1: Attach Drawer Slide Rails

Attach the drawer slide rails, labeled CL and CR, to the base panels. Use 18x screws (Part 146114). A diagram shows a hand using a screwdriver to attach the rails.

[Diagram: Shows two base panels with multiple screw holes. Drawer slide rails labeled CL and CR are positioned on them. Arrows indicate screwing in 18x screws (146114).]

Step 2: Assemble Frame Sides and Back Support

Assemble the side panels and back support pieces using cam locks and dowel pins. A diagram shows a hand turning a cam lock to secure parts.

[Diagram: Shows frame side panels and back support pieces being joined. A close-up shows a cam lock (e.g., 119252/119250) being inserted and turned to lock a dowel pin (e.g., 118331) into place.]

Step 3: Insert Dowel Pins into Side Panels

Insert 4x dowel pins (Part 118331) into the designated holes on the side panels.

[Diagram: Shows a side panel with holes. A hand is shown inserting dowel pins (118331) into these holes.]

Step 4: Insert Wooden Dowels into Base Panels

Insert 8x wooden dowels (Part 101345) into the designated holes on the base panels.

[Diagram: Shows base panels with holes. A hand is shown inserting wooden dowels (101345) into these holes.]

Step 5: Attach Back Panel

Slide the back panel into the grooves of the assembled frame. An arrow indicates the direction of insertion.

[Diagram: Shows the partially assembled frame and the back panel being slid into place.]

Step 6: Secure Back Panel

Secure the back panel using 2x cam locks (Parts 119252/119250).

[Diagram: Shows a close-up of the back panel connection point, with cam locks (119252/119250) being inserted and turned to secure the panel.]

Step 7: Attach Drawer Slides (CL)

Attach the drawer slides labeled CL to the side panels of the dresser frame. Use 6x screws (Part 151931). A diagram shows a hand screwing them in.

[Diagram: Shows a side panel of the dresser frame. Drawer slide rails labeled CL are positioned and secured with screws (151931).]

Step 8: Attach Drawer Slides (CR)

Attach the drawer slides labeled CR to the other side panels of the dresser frame. Use 6x screws (Part 151931). A diagram shows a hand screwing them in.

[Diagram: Shows the opposite side panel of the dresser frame. Drawer slide rails labeled CR are positioned and secured with screws (151931).]

Step 9: Insert Dowel Pins into Top Panel

Insert 2x dowel pins (Part 118331) into the designated holes on the top panel.

[Diagram: Shows the top panel with holes. A hand is shown inserting dowel pins (118331) into these holes.]

Step 10: Connect Side Panels to Back Panel

Connect the side panels to the back panel, aligning the dowels and cam lock holes.

[Diagram: Shows the side panels being brought together with the back panel, preparing for connection.]

Step 11: Attach Top Panel (Cam Locks)

Attach the top panel to the assembled frame. Secure it using 2x cam locks (Parts 119252/119250). A diagram shows a hand turning a cam lock.

[Diagram: Shows the top panel being placed onto the frame. A close-up shows cam locks (119252/119250) being used to secure the top panel.]

Step 12: Attach Top Panel (Dowel Pins)

Further secure the top panel by inserting 2x dowel pins (Part 118331) into the designated holes.

[Diagram: Shows the top panel being secured with dowel pins (118331).]

Step 13: Connect Second Side Panel

Connect the second side panel to the frame, aligning it with the back panel and top panel.

[Diagram: Shows the second side panel being attached to the main frame.]

Step 14: Secure Second Side Panel

Secure the second side panel using 2x cam locks (Parts 119252/119250). A diagram shows a hand turning a cam lock.

[Diagram: Shows a close-up of the connection points for the second side panel, with cam locks (119252/119250) being used for securing.]

Step 15: Attach Third Side Panel

Attach the third side panel to the frame, aligning it with the back panel and top panel.

[Diagram: Shows the third side panel being attached to the main frame.]

Step 16: Secure Third Side Panel

Secure the third side panel using 2x cam locks (Parts 119252/119250). A diagram shows a hand turning a cam lock.

[Diagram: Shows a close-up of the connection points for the third side panel, with cam locks (119252/119250) being used for securing.]

Step 17: Attach Wall Mounting Brackets (Bottom)

Attach 4x brackets (Part 102553) to the bottom of the dresser frame using 8x screws (Part 105248). A diagram shows a hand screwing them in.

[Diagram: Shows the bottom of the dresser frame. Brackets (102553) are positioned and secured with screws (105248).]

Step 18: Attach Wall Mounting Brackets (Bottom, continued)

Attach 4x brackets (Part 105248) to the bottom of the dresser frame. These appear to be part of the wall mounting system. A diagram shows a hand screwing them in.

[Diagram: Shows the bottom of the dresser frame. Additional brackets (105248) are positioned and secured with screws.] Note: Part number 105248 is used for both screws and brackets in the diagrams, but context suggests it's primarily screws here, and 102553 are the brackets.]

Step 19: Attach L-shaped Brackets and Support Pieces

Attach 4x L-shaped brackets (Part 10101849) and 3x support pieces (Part 158568) to the frame.

[Diagram: Shows the frame with L-shaped brackets (10101849) and support pieces (158568) being attached.]

Step 20: Secure L-shaped Brackets

Secure the L-shaped brackets (Part 10101849) to the frame. A diagram shows a hand screwing them in.

[Diagram: Shows a close-up of the L-shaped brackets (10101849) being attached to the dresser frame.]

Step 21: Slide in Back Cover Panels

Slide the back cover panels into the frame. An arrow indicates the direction of insertion.

[Diagram: Shows the dresser frame with back cover panels being slid into place.]

Step 22: Secure Back Cover Panels

Secure the back cover panels using 7x screws (Parts 151707 and 151708). Diagrams show close-ups of the screws being inserted.

[Diagram: Shows the back of the dresser with cover panels. Screws (151707/151708) are being used to attach them.]

Step 23: Attach Retaining Clips

Attach 4x retaining clips (Parts 10093081 and 10093082) to the frame. Diagrams show the clips being attached and a hand pressing one into place.

[Diagram: Shows retaining clips (10093081/10093082) being fitted into slots on the dresser frame.]

Step 24: Insert Wooden Dowels into Drawer Dividers

Insert 6x wooden dowels (Part 101345) into the drawer divider panels.

[Diagram: Shows drawer divider panels with holes. Wooden dowels (101345) are being inserted.]

Step 25: Insert Dowel Pins into Drawer Base Panels

Insert 6x dowel pins (Part 118331) into the drawer base panels.

[Diagram: Shows drawer base panels with holes. Dowel pins (118331) are being inserted.]

Step 26: Assemble Drawer Boxes

Assemble the drawer boxes by connecting the sides, base, and back. This involves using various fasteners.

[Diagram: Shows the process of assembling a drawer box, connecting its various components.]

Step 27: Attach Drawer Slides to Frame (Cam Locks)

Attach drawer slides to the dresser frame. Use 4x cam locks (Part 120076). A diagram shows a hand turning a cam lock.

[Diagram: Shows drawer slide components being attached to the inside of the dresser frame. Cam locks (120076) are used for securing.]

Step 28: Attach Drawer Slides to Frame (Cam Locks)

Attach drawer slides to the dresser frame. Use 2x cam locks (Part 110126). A diagram shows a hand turning a cam lock.

[Diagram: Shows more drawer slide components being attached to the inside of the dresser frame. Cam locks (110126) are used for securing.]

Step 29: Attach Drawer Front Panels

Attach the drawer front panels to the assembled drawer boxes. Use 2x retaining clips (Parts 10093081 and 10093082). Diagrams show the clips being attached and a hand pressing one into place.

[Diagram: Shows drawer front panels being attached to drawer boxes using retaining clips (10093081/10093082).]

Step 30: Wall Mounting Preparation

Prepare for wall mounting. This step involves attaching hardware to the dresser and identifying wall mounting points.

[Diagram: Shows the dresser and an illustration of marking points on the wall for mounting.]

Step 31: Position Dresser for Wall Mounting

Position the dresser against the wall where it will be mounted. Marks on the wall indicate the intended mounting locations.

[Diagram: Shows the assembled dresser placed against a wall, with 'X' marks on the wall indicating where to attach the anti-tip hardware.]

Step 32: Attach Wall Mounting Hardware to Dresser

Attach the wall mounting hardware to the dresser. Use 2x screws (Part 109572) to secure the bracket assembly (Part 10102070) to the dresser frame. A diagram shows a hand screwing them in.

[Diagram: Shows a close-up of the dresser frame with wall mounting hardware (bracket assembly 10102070) being attached using screws (109572).]

Step 33: Attach Wall Mounting Bracket Assembly

Attach the wall mounting bracket assembly (Part 10102070) to the dresser. Use 2x of these assemblies. Diagrams show the bracket assembly being fitted and secured.

[Diagram: Shows the wall mounting bracket assembly (10102070) being attached to the dresser frame, with close-ups illustrating the connection.]

Step 34: Secure Wall Mounting Brackets

Secure the wall mounting brackets. Use 2x screws (Part 109572) and the bracket assembly (Part 10102070). A diagram shows the final attachment to the dresser.

[Diagram: Shows the wall mounting brackets being secured to the dresser frame using screws (109572) and bracket assemblies (10102070).]

Step 35: Prepare Drawer Base Panels

Prepare the drawer base panels. Insert 4x dowel pins (Part 118331) into the designated holes.

[Diagram: Shows drawer base panels and dowel pins (118331) being inserted.]

Step 36: Prepare Drawer Side Panels

Prepare the drawer side panels. Insert 4x wooden dowels (Part 101345) into the designated holes.

[Diagram: Shows drawer side panels and wooden dowels (101345) being inserted.]

Step 37: Attach Drawer Sides to Drawer Bases

Attach the drawer side panels to the drawer base panels, aligning the dowels and holes.

[Diagram: Shows drawer side panels being connected to drawer base panels.]

Step 38: Secure Drawer Sides

Secure the drawer sides using 4x cam locks (Part 120076). A diagram shows a hand turning a cam lock.

[Diagram: Shows cam locks (120076) being used to secure the drawer side panels to the base.]

Step 39: Slide in Drawer Back Panel

Slide the drawer back panel into the grooves of the assembled drawer sides.

[Diagram: Shows the drawer back panel being slid into place.]

Step 40: Attach Drawer Back Support

Attach the drawer back support (Part 10040242) to the drawer. Use a hammer to gently tap it into place. Diagrams show the correct and incorrect methods of attachment.

[Diagram: Shows the drawer back support (10040242) being attached to the drawer assembly. A hammer is shown. Also shows a warning icon indicating incorrect attachment.]

Step 41: Attach Drawer Front Panel

Attach the drawer front panel to the assembled drawer box. An arrow indicates the direction of insertion.

[Diagram: Shows the drawer front panel being attached to the drawer box.]

Step 42: Secure Drawer Front Panel

Secure the drawer front panel using 4x dowels (Part 145718) and cam locks (Part 120076). Diagrams show the process of inserting dowels and turning cam locks.

[Diagram: Shows dowels (145718) being inserted and cam locks (120076) being used to secure the drawer front panel.]

Step 43: Attach Drawer Slides to Drawer Box

Attach the drawer slides to the assembled drawer box. Use 6x screws (Part 146114). Diagrams show the slides being attached and screws being inserted.

[Diagram: Shows drawer slide components being attached to the sides of the drawer box using screws (146114).]

Step 44: Insert Drawers

Insert the assembled drawers into the dresser frame. A warning icon indicates that drawers must be assembled correctly before insertion.

[Diagram: Shows a drawer being inserted into the dresser. A warning icon (⚠️) with an image of correctly and incorrectly assembled drawers is shown.]

Step 45: Final Dresser Assembly

The dresser is now assembled. The final image shows the completed STORKLINTA 6-drawer dresser with all drawers installed.

[Diagram: Shows the fully assembled STORKLINTA 6-drawer dresser. A detail shows the mechanism for opening and closing drawers.]