Nedis VCON110BK VHS-C Cassette Adapter

Description

The VHS-C cassette adapter is a device the size of a normal VHS cassette, designed to play back the VHS-C cassette in a regular video recorder (VCR).

Parts Identification:

• 1. Open/close switch
• 2. VHS-C cassette compartment
• 3. Lid (VHS-C cassette compartment)
• 4. Battery compartment
• 5. Cover (battery compartment)

Use

Installing the battery

1. Remove the cover from the battery compartment.
2. Insert a battery (AA) into the battery compartment.
3. Place the cover onto the battery compartment.

Installing VHS-C cassette

1. Move the open/close switch into the direction of the arrow [→] to open the lid.
2. Place the VHS-C cassette into the VHS-C cassette compartment.
3. Close the lid until the open/close switch clicks into place.

Removing the VHS-C cassette

1. Move the open/close switch into the direction of the arrow [→] to open the lid.
2. Note: The VHS-C cassette will rewind automatically.
3. Remove the VHS-C cassette from the VHS-C cassette compartment.
4. Close the lid until the open/close switch clicks into place.

Safety

General safety

• Read the manual carefully before use. Keep the manual for future reference.
• Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
• Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
• Do not expose the device to water or moisture.

Battery safety

• Use only the batteries mentioned in the manual.
• Do not install batteries in reverse polarity.
• Do not short-circuit or disassemble the batteries.
• Do not expose the batteries to water.
• Do not expose the batteries to fire or excessive heat.
• Batteries are prone to leakage when fully discharged. To avoid damage to the product, remove the batteries when leaving the product unattended for longer periods of time.
• If liquid from the batteries comes into contact with skin or clothing, immediately rinse with water.

Cleaning and maintenance

Warning!

• Do not use cleaning solvents or abrasives.
• Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
• Do not immerse the device in water or other liquids.
• Clean the outside of the device using a soft, damp cloth.
• Clean the inside of the device using a soft brush.