Smart Wake-Up Light

Safety Instructions

To reduce the risk of fire, electric shock, or injury, please read these instructions before use.

1. This product is only intended for household use, including similar use in hotels.
2. Please place this product on a stable, level, and non-slippery surface.
3. Do not use this product in wet surroundings, such as in the bathroom, near a shower or a swimming pool.
4. Do not let water run into the product or spill any water onto the product.
5. Make sure the power adapter does not get wet when in use.
6. Only use the ORIGINAL adapter and USB cable provided.
7. Do not use this product as a means of reducing your sleeping time. This product aims to help you wake more easily instead of diminishing your need for sleep.

Maintenance and Care

1. Please clean the product with a dry and soft cloth.
2. Do not use abrasive cleaning agents, pads, or cleaning solvents like alcohol, acetone, etc., as this might damage the surface of the product.
3. If the product will not be used for an extended period of time, please unplug the power adapter from the socket, then store the product in a safe and dry place where it will not be crushed, banged, or subject to damage.

What's In The Box

• Smart Wake Up Light (Illustration of the Smart Wake-Up Light.)
• Adapter (Illustration of a power adapter with a USB cable.)
• User Manual (Illustration of the User Manual booklet.)

Product Overview

A circular smart wake-up light with a digital display showing 12:30.

Installation & Getting Started

Connect the Wake-up Light to power with the Adapter provided.

Illustration showing the Smart Wake-Up Light connected to a power adapter plugged into a wall socket.

Important Notes

• This product has no power on/off button; it turns on once you plug the power adapter into the socket. To disconnect power, unplug the power adapter.
• Loosen the tie that wraps the FM Antenna, then unroll the wire for receiving strong signals when turning on the FM Radio.

Operation Guide

The Wake-up Light will automatically save the current setting and exit from setting mode if the operation is not resumed within 15 seconds.

Time Setting

Before the first use, please set the time.

1. Press and hold [confirm] for 2 seconds until the Hour starts to flash on the LED display.
2. Press [up] / [down] to change the Hour, then press [confirm] to confirm and switch to Minute.
3. Press [up] / [down] to change the Minute, then press [confirm] to confirm and switch to 12/24H format.
4. Press [up] / [down] to change between 12/24H, then press [confirm] to confirm.

If the 12-hour clock format is selected, PM or AM will be displayed accordingly.

LED Display Brightness

Press [confirm] to toggle the brightness of the LED Display from 0% -10%-30%-50%-100%.

Alarms

You can set Alarm 1 and Alarm 2 with the wake-up light. Alarm 3 and Alarm 4 can be set in the 'Smart Life' app. The following guides setting Alarm 1.

1. Press [confirm] for 2 seconds until the alarm icon and the Hour start to flash on the LED display.
2. Press [up] / [down] to change the Hour, then press [confirm] to confirm and switch to Minute.
3. Press [up] / [down] to change the Minute, then press [confirm] to confirm and switch to ringtone selection.
4. Press [up] / [down] to select your favorite ringtone for Alarm 1, then press [confirm] to confirm.

Ringtone Options:

• OFF: Ringtone off
• S-01 to S-07: Nature sounds
• F-08: The last FM station you were tuned to before turning off the radio. If you prefer another station, please turn on the FM radio to search and select it, then set the alarm again.

Volume Setting:

5. Press [up] / [down] to adjust the ringtone volume, then press [confirm] to confirm and start setting the Sunrise time.

Sunrise Time Setting:

6. Press [up] / [down] to adjust the brightness level for the light, then press [confirm] to confirm and start setting the sunrise time to turn on the light before the alarm rings.

Brightness Levels:

• L-00: Light off
• L-01 to L-20: Brightness levels (1% to 100%)

7. Press [up] / [down] to select the sunrise time from 10, 20, 30, 40, 50, or 60 minutes, then press [confirm] to confirm and complete all settings for Alarm 1. Alarm 1 is now active.

If you select 10 minutes for sunrise and the alarm time is 7:00 AM, the light will turn on at 6:50 AM and gradually become brighter. When the alarm rings at 7:00 AM, the light brightness will reach the level set in Step 6.

Snooze

When the alarm rings, press [snooze] to activate Snooze Mode, delaying the alarm for 9 minutes.

1. You can snooze up to 5 times.
2. Press the corresponding Alarm Button ([alarm 1] or [alarm 2]) to manually stop the alarm.
3. If you do not respond within 15 minutes after the alarm rings, the alarm will automatically stop for that instance.

FM Radio

1. Press [FM radio] to turn ON/OFF.
2. Press and hold [FM radio] for 2 seconds to automatically search for FM stations. Available stations will be saved as P-01, P-02, etc., in sequence.
3. Press and hold [up] / [down] to switch among the saved stations.
4. Press [up] / [down] to adjust the volume.

Volume Levels: U-01 to U-20.

Note: Please fully unwind the antenna and move it around until you receive the best reception.

Bluetooth

1. Press and hold [bluetooth] for 2 seconds to turn on Bluetooth.
2. Press [play/pause] to pause the music.
3. Press and hold [up] / [down] for 2 seconds to skip to the next song.
4. Press [up] / [down] to adjust the volume.

Volume Levels: U-01 to U-20.

Notes: 1. Bluetooth On/Bluetooth Off is indicated by a prompt sound. 2. If the device has been connected with other devices before, Bluetooth will automatically open.

Sleep Aid

Sleep Aid simulates the process of sunset, aiming to help you fall asleep easily. After it's enabled, the sunset light will gradually dim, and the volume of the selected nature sound will decrease with time.

1. Press and hold [sleep aid] for 2 seconds, then press [up] / [down] to select a timer from 10 MIN to 120 MIN.
2. Press [confirm] to confirm your selection, then press [up] / [down] to select your favorite sound to help you sleep.

Sound Options:

• OFF: Sound off
• S-01 to S-07: Nature sounds
• F-08: The last FM station you were tuned to before turning off the radio. If you prefer another station, please turn on the FM radio to search and select it, then set the alarm again.

3. Press [confirm] to confirm your selection, then press [up] / [down] to adjust the volume of the sound.

Volume Levels: U-01 to U-20.

6. Press [confirm] to confirm your selection, then press [up] / [down] to adjust the brightness level of the light.

Brightness Levels: L-01 to L-20.

7. Press [confirm] to confirm your selection and complete all settings for Sleep Aid. Sleep Aid is now enabled.

Press [sleep aid] to disable Sleep Aid.

Light Features

Bedside Light

1. Double press [LED light] to turn on the monochrome mode.
2. Short press [LED light] to manually change the color of the light; one by one and 7 colors are available.
3. Press and hold [LED light] to adjust the brightness level.

Brightness Levels: 1% to 100%.

Atmosphere Light

1. Press and hold [bluetooth] for 2 seconds to turn on the atmosphere mode.
2. Short press [bluetooth] to manually change the color of the light; one by one and 6 modes are available.

The eighth mode is MIC function, according to the Bluetooth connection.

Connect to Your Mobile Device

Use the 'Smart Life' app to connect and control your Wake-Up Light.

Step 1: Download the App

Download 'Smart Life' into your mobile device from the App Store or Google Play, or scan the QR code (QR code excluded).

Screenshot of the 'Smart Life' app login screen with fields for username/email and password, and buttons for 'Log In', 'Sign Up', and 'Try now'.

Step 2: Create an Account and Log In

Open the app and follow the on-screen instructions to create an account or log in.

Step 3: Connect the Device to Your Phone

Ensure your wake-up light is powered on. Press and hold the [WiFi] button for 15 seconds; the WiFi icon will flash quickly.

Step 1: Tap Add Device

Screenshot of the 'Smart Life' app home screen showing 'No devices' and an 'Add Device' button.

Step 2: Tap Auto Scan

Screenshot of the 'Smart Life' app 'Add Manually' screen, showing categories like 'Electrical', 'Lighting', 'Sensors', etc., with options for different light sources and strip lights.

Step 3: Enable Permissions

Screenshot of the 'Smart Life' app permission request screen for scanning devices, with options for 'Access location', 'Enable Wi-Fi', 'Enable Bluetooth', and a 'Start scanning' button.

Tap 'Start scanning' after enabling necessary permissions.

Step 4: Tap Next

Screenshot of the 'Smart Life' app showing 'Available devices found' with the 'Wake Up Light' detected, and a 'Next' button.

Tap 'Next' after your wake-up light is found.

Step 5: Wait for Connection

Screenshot of the 'Smart Life' app showing a 'Connecting...' progress indicator with a percentage.

Place your router, mobile phone, and device as close as possible during connection.

Step 6: Select Wi-Fi and Enter Password

Screenshot of the 'Smart Life' app 'Enter Wi-Fi Password' screen, showing a Wi-Fi network name 'HeimVision' and a password field, with 'Cancel' and 'Confirm' buttons.

Select your Wi-Fi network and enter the correct password.

Step 7: Create a Name for Your Wake-Up Light

Screenshot of the 'Smart Life' app confirming 'Added successfully' for the 'Wake Up Light', with a 'Done' button.

You can now name your device.

App Settings

1. Ensure that Network Timing is ON. If it's off, the Repeat function of alarms is unavailable, and the alarm settings might not be accurate.

2. In this interface, you can also adjust the Brightness of the LED Display.

Screenshot of the 'Hensel Smart Wake Up Light' settings screen in the 'Smart Life' app, showing options for '24-hour clock', 'Network Timing', 'Automatic brightness', 'Night brightness', 'daytime brightness', and 'night time'.

Q&A

This section summarizes common problems you might encounter with the Wake-Up Light. If you are unable to solve the problem with the information below, please feel free to contact xxx@xx.com for assistance.

Q1. The appliance does not work at all.

• Perhaps the adapter is not inserted properly in the wall outlet. Plug the adapter properly into the wall outlet.
• Perhaps there is a power failure. Check if the power supply works by connecting another appliance.

Q2. What should I do when I cannot link the Wake-Up Light with the Smart Life App?

• Check if the Wake-Up Light is powered on.
• Make sure your mobile device is connected to the 2.4GHz WiFi Network.
• Make sure the password of your WiFi network entered in the Smart Life App is correct when linking the Wake-Up Light.
• Make sure the Wake-Up Light is ready for linking: the WiFi indicator flashes quickly. If not, please press the Snooze button (about 10 seconds) until the WiFi indicator begins to flash rapidly.

Q3. Why did I fail to set the alarm clock to ring only on weekdays?

• Please turn on the Network auto-time in the setting interface of the Smart Life App, then you can set the alarm clock according to your needs.

Q4. The radio produces a crackling sound.

• Perhaps the broadcast signal is weak. Please fully unwind the antenna and move it around until you receive the best reception.

Q5. How can I set Alarm 3 and Alarm 4?

• Alarm 3 and Alarm 4 can only be set on the Smart Life App.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

RF Warning Statements:

To maintain compliance with FCC's RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.