Faber Stratus Isola SS Island Range Hood
A beautiful new ceiling-mounted hood with advanced features. The Stratus hood features a stainless steel mounted panel that fits in the ceiling above your cooking, quietly doing its job.
Available Models
| Model # | Size / Color | CFM* | Sones |
|---|---|---|---|
| STRTIS36SSNB | 36 Stainless Steel | choose | 1.0 - 3.0 |
| STRTIS48SSNB | 48 Stainless Steel | choose | 1.0 - 4.0 |
*Choose a blower: IB300 (300 CFM), IB400 (400 CFM), IB600 (600 CFM), RB900 (900 CFM), RB1200 (1200 CFM), AXP250 (735 CFM)
Key Features
-
Perimetric Filter System
Stainless panel increases efficiency and decreases noise levels.
-
Remote Control (included)
Control all features of the hood from the convenience of a wireless remote control.
-
Pro Motor
The motor in this hood is surrounded in metal with all metal impellers for top performance.
-
Installation Flexibility
Mounting flexibility above the cooktop: 35" - 72" height off the stove.
Specifications
- Min/Max Ceiling Height: 5' 11" - 9' (up to 72" above the stove)
- Convertible to Ductless / Recirculating: Yes - kit sold separately
- Hood Width | Depth (36"): 35 7/16" w | 18 1/2" d
- Hood Width | Depth (48"): 47 1/4" w | 27 9/16" d
- Controls: 4 Speed LED Digital Touch Control
- Lighting: 4 X 1 (W) LED
- Ducting: 6" round - 4 Way side Vent / 10" top only
- Grease Filters: Dishwasher safe mesh
- Perimetric Filter/ SilentKit: Yes
- 24 Hour Anti-Pollution Mode: Yes
- 10 Minute Intensive Speed: Yes
- 30 Minute Auto Shut Off: Yes
- Filter Wash Alarm: Yes
- ADA Compliant: Yes (with included remote control)
- AC Power: 400 watts / 3.2 amps
Performance (IB600)
| CFM | SPEED 1 | SPEED 2 | SPEED 3 | BOOST |
|---|---|---|---|---|
| 150 | 300 | 450 | 560 | |
| Sones | 3.9 | 5 | 6.0 | 7.3 |
Accessories
-
# FILTER1 - Charcoal Filter Kit
High quality charcoal filter for use when recirculating the air back into the kitchen. Filters out odor and should be replaced every 6 months.
-
# FILTER1LL2 - Long Lasting Charcoal Filter Kit
New washable charcoal filter can be recharged and washed up to 8 times. For use when recirculating the air back into the kitchen. Filters out odor and can last up to 4 years.
-
# FLANGE10 - 10" Plate for Remote Blower
A 10" plate for connecting the remote blower to 10" round ducting. This is required for AXP250 & non-Faber remote blowers.
-
# MUDAMPER6 / MUDAMPER8 / MUDAMPER10 - Universal Make-Up Air Damper
Satisfies make-up air requirements, this kit uses an air switch to activate the make-up air damper to open and bring fresh air into the home when the hood fan is on. It then closes tightly when the hood is off. The CFM level is not reduced with this accessory.
-
# FLANGE3 - 3 1/4" x 10" Rectangular Flange Transition
For ceiling or downdraft hoods with an external blower that requires a 10" round duct, this transition turns the duct into a 3 1/4" x 10" rectangular duct. Transition back to 10" round once inside the basement, ceiling, attic, wall etc.
Dimensions
Overall Dimensions:
36" Hood: 35 7/16" W x 18 1/2" D
48" Hood: 47 1/4" W x 27 9/16" D
Bottom/Side View:
Ceiling Cut Out:
| Hood | X | Y |
|---|---|---|
| 36" | 35 7/16" | 34 9/16" |
| 48" | 47 1/4" | 46 3/8" |
WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this range hood. Check local make up air codes for guidelines.
Faber, 2 Cabot Road Hudson, MA 01749 • TEL: (508) 358-5353 • E-Mail: info@faberonline.com • www.faberonline.com
Home - Faber Range Hoods US and Canada
