Yottamaster HC1-C3 M.2 NVMe SSD Clone Duplicator User Manual
Introduction
Please read this user manual carefully before using, and keep it for future reference. For any questions, please feel free to contact the Technical Support Team at supports@yottamaster.com, or visit the "Contact Us" section on yottamaster.com for help.
I Product Overview
1.1 About HC1-C3
Yottamaster HC1-C3 is an M.2 NVMe SSD clone duplicator. The aluminum alloy case and the conductive silicone pad help to dissipate heat during operation. It supports NVMe M.2 SSDs with PCI-e protocol, providing high-speed data transfer for large files. The clone function allows for fast and convenient backup of important data.
1.2 Features
- Supports offline cloning with LED indicators to monitor drive working status.
- Adopts USB 3.1 Gen2 10Gbps main controller for transfer rates up to 10Gbps.
- Supports UASP (USB Attached SCSI Protocol) acceleration for faster transfer rates.
- Fits M.2 NVMe SSDs of sizes 2230, 2242, 2260, and 2280, with tool-free installation.
- The Type-C port supports reversible plugs for easy use.
- Driver-free, supporting hot plug and play.
- Compatible with PCs, laptops, smart TVs, smart routers, PS4, and more.
II What's in the Box
- 1 × M.2 NVMe SSD Clone Duplicator
- 1 × Power Adapter
- 4 × Power Adapter Plugs
- 1 × Type-A to Type-C Cable
- 1 × Type-C to Type-C Cable
- 1 × User Manual
III Specifications
| Content | Description |
|---|---|
| Model | HC1-C3 |
| Product Name | M.2 NVMe SSD Clone Duplicator |
| Dimensions | 112(L)×65(W)×15(H)mm |
| Input Port | M.2 M-KEY, B&M-KEY |
| Output Port | USB3.1 GEN2 Type-C |
| Transfer Rate | 10Gbps |
| Power Supply | Power Adapter (DC 5V/4A) |
| System Supported | Windows, Mac OS, Linux |
IV Instructions
4.1 Product Overview
The device features the following components:
- 1. Power Switch ?
- 2. Type-C Interface ? (for connecting to computer)
- 3. DC IN ⚡ (for power adapter)
- 4. Source Drive Slot (for the source M.2 NVMe SSD)
- 5. Copy Progress Indicator ? (LEDs showing 25%, 50%, 75%, 100% progress)
- 6. Clone Switch ▶️
- 7. Target Drive Slot (for the target M.2 NVMe SSD)
4.2 Offline Cloning with One Button
Operation cautions:
- Supports M.2 NVMe PCIe M-Key/ B&M-Key SSD only. M.2 SATA B&M-Key SSD is not supported.
- Please do not connect the product to your computer while cloning.
Operating steps:
- Unscrew the rear screws and open the top cover.
- Insert the target drive into the TARGET drive slot, then insert the source drive into the SOURCE drive slot. Note: The capacity of the target drive must be equal to or above the capacity of the source drive.
- Connect the power adapter to the product and a valid power source.
- Press the power button to turn on the product.
- Long press the Clone button for 5 seconds until the indicators start flashing.
- The 4 indicators will show the process of cloning: 25%, 50%, 75%, and 100%. The indicators will all light up when cloning is finished.
V Notes
- Hard drives are delicate. Please read the manual carefully before use and install correctly by following the manual.
- New hard drives need to be initialized before use, or they cannot be recognized.
- Do not hit, throw, puncture, drop, squeeze, or bend the product.
- Avoid placing the product in high-temperature, low-temperature, humid, or dusty environments.
- Do not place this product in a corrosive environment, and do not use other chemical solutions to clean the product.
- Avoid placing the product or accessories in devices with strong electromagnetic fields and keep the product away from magnetic equipment.
- Keep the product and accessories away from children. Do not allow children to use the product without supervision.
- Do not disassemble or repair the product and accessories yourself. Please contact an authorized support center for help.
VI Terms and Statements
6.1 Warranty
Eighteen-Month Limited Warranty
Yottamaster warrants that the product will be free from substantial defects in material and workmanship for the duration of the warranty period specified below. The warranty is eighteen months from the date of delivery, and proof of date of delivery must be provided. This warranty only applies to the first end-user purchaser. If a defect covered by this warranty occurs, Yottamaster, at its sole discretion, shall repair or replace the product at no charge. If there are any questions or suggestions, please contact the Yottamaster customer support team for help.
6.2 Declaration
YOTTAMASTER Technologies Co., Ltd, all rights reserved. Thank you for purchasing a Yottamaster product.
For any issues encountered while using this product, please refer to this manual for help. Yottamaster is a registered trademark of YOTTAMASTER Technologies Co., Ltd. All product names, trademarks, and registered trademarks are the property of their respective owners. This manual is for reference only and is not a guarantee. YOTTAMASTER Technologies Co., Ltd. reserves all rights of maintenance to this manual and shall not be liable for any loss or damage resulting from this manual. YOTTAMASTER Technologies Co., Ltd. shall not be liable for compensation and maintenance for the following conditions:
- Any special, incidental, indirect, or secondary loss or damage.
- Profit and revenue lost or damage.
- Files, data, drive, and device lost or damage.
Note: Compensation for lost or damage resulting from this manual or Yottamaster product shall not exceed the payment of your purchase to this product.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
