Kenwood Programming Software
This document lists Kenwood programming software, their versions, compatible products or models, and release dates. It also includes information on drivers and special notes for certain software packages.
| SOFTWARE | VER. | PRODUCTS or MODELS | RELEASED |
|---|---|---|---|
| KAS-10 | 5.00 | NXR-x10 V2 Enhancements. | 06/03/2016 |
| KAS-12 | 2.02 | Battery Reader Software for KNB-L1, L2, L3, LS5, LS6 and KSC-Y32. Requires KPT-300LMC Authentication. Note: Includes upgrade for KPT-300LMC Version 1.12 License Manager Client. | 08/18/2017 |
| KAS-20 | 1.22 | KAS-20S & KAS-20C AVL and Dispatch Software. Make sure to update both KAS-20S and KAS-20C when performing updates. | 11/13/2018 |
| KCT-53U Driver | 1.70 | USB to Serial Cable. | 02/29/2016 |
| KPG-22U, KPG-36U, KPG-43U, KPG-46U Drivers | 6.7 | USB Drivers for KPG-22U, KPG-36U, KPG-43U, and KPG-46U Programming Cables. | 10/25/2017 |
| KPG-36X, KPG-46X, KPG-186UW Drivers | 1.00 | USB Drivers for KPG-36X, KPG-46X and KPG-186UW Programming Cables. | 06/27/2018 |
| KPG-38DN | 2.01 | TK-290, TK-390. | 11/29/2012 |
| KPG-44DN | 2.10 | TK-690, TK-790, TK-890. | 11/29/2012 |
| KPG-47DN | 3.02 | TKR-740, TKR-840, TKR-830. | 11/29/2012 |
| KPG-49D | 4.21 | TK-280, TK-380, TK-480, TK-481, TK-780, TK-880, TK-980, TK-981. | 02/16/2016 |
| KPG-59D | 3.02 | TK-190, TK-6110. | 11/12/2009 |
| KPG-70DN | 3.12 | TK-7102, TK-8102. | 03/16/2014 |
| KPG-71D | 1.30 | KDS-100. | 04/14/2009 |
| KPG-74DN | 2.10 | TK-2140, TK-3140. | 11/29/2012 |
| KPG-89DN | 1.61 | TK-7180, TK-7180H, TK-7182, TK-7182H, TK-8180, TK-8180H, TK-8182, TK-8182H, TK-2180, TK-3180. | 11/29/2012 |
| KPG-91DN | 2.13 | TKR-750, TKR-850, TKR-751, TKR-851. | 12/19/2012 |
| KPG-96DN | 3.30 | TK-2180, TK-3180, TK-7180(H), TK-8180(H) MPT. | 11/29/2012 |
| KPG-101DN | 2.40 | TK-2170, TK-3170, TK-3173. | 12/19/2012 |
| KPG-109DN | 5.00 | NXR-700, NXR-800, NXR-900, NXR-901. | 01/13/2016 |
| KPG-110SM | 5.31 | NXR-700, NXR-800, NXR-900, NXR-901. Note: KPG-110SM V 3.22 and higher is required to create SKF for KPG-D1N (NX-5000 Series). Works with Version 5.31 firmware or Later. | 07/06/2018 |
| KPG-111DN | 5.21 | NX-200, NX-200G, NX-200S, NX-210, NX-300, NX-300G, NX-300S, NX-410, NX-411, NX-700, NX-800, NX-900, NX-901. | 06/19/2017 |
| KPG-119DN | 2.01 | TK-2302, TK-3302. Compatible with V2 Features. | 12/19/2012 |
| KPG-120D | 1.20 | TK-2300, TK-3300. Channel information changed to Narrow. | 02/19/2013 |
| KPG-124DN | 1.32 | TK-7302V, TK-7302H, TK-7302HV, TK-8302U, TK-8302H, TK-8302UH. | 12/19/2012 |
| KPG-128DN | 1.31 | TK-2360, TK-3360. | 12/19/2012 |
| KPG-129DN | 3.20 | NXR-710, NXR-810 Repeater. | 06/09/2017 |
| KPG-134DN | 2.33 | TK-2312, TK-3312. | 12/19/2012 |
| KPG-135DN | 2.21 | TK-7360, TK-8360. | 12/19/2012 |
| KPG-141DN | 5.21 | NX-220, NX-320, NX-420, NX-720HG, NX-820HG, NX-920G. | 06/19/2017 |
| KPG-143DN | 5.21 | NX-200, NX-200G, NX-200S, NX-210, NX-220, NX-300, NX-300G, NX-300S, NX-320, NX-410, NX-411, NX-420, NX-700, NX-700H, NX-720, NX-800, NX-800H, NX-820, NX-900, NX-901, NX-920G, MPT. Adds support for G Series models. Supported new market code of MPT ESN. Works with firmware Ver.sion 5.10 or later. | 06/19/2017 |
| KPG-147NC | 1.00 | KMC-51 / KMC-52 Programming software for models NX-200, NX-210, NX-300, NX-410, NX-411, TK-5220 and TK-5320 or TK-5210G, TK-5310G and TK-5410. | 04/03/2013 |
| KPG-149RM | 2.00 | NXR-700, NXR-800, NXR-900, NXR-901, NXR-710, NXR-810. Remote Monitor Software. | 03/07/2016 |
| KPG-150AP | 2.02 | ??? | 01/13/2016 |
| KPG-159DN | 1.05 | TK-3402(U), TK-2402(V). | 01/19/2016 |
| KPG-160D | 1.05 | TK-2400, TK-3400. | 01/19/2016 |
| KPG-166DN | 2.32 | TK-D240, TK-D340, TK-D740, TK-D840. Works with the TK-Dx40 firmware Version 2.30 or later. | 12/04/2017 |
| KPG-170D | 3.03 | NX-240, NX-340. | 09/22/2016 |
| KPG-172DK | 1.12 | PKT-23K USB Drivers are required. | 01/13/2016 |
| KPG-174DN | 2.50 | TKR-D710, TKR-D810 DMR Repeater Version 2.50 DMR Enhancements. Works with Firmware Version 2.50 or later. | 08/07/2017 |
| KPG-175DN | 3.03 | NX-740, NX-840. | 08/04/2016 |
| KPG-176DN | 1.20 | NX-220, NX-320, NX-720, NX-820. Supports Type D trunking when option is installed (KWD-NXD20K and L-1781 or L-1782). | 01/21/2016 |
| KPG-180AP | 2.32 | NX-5200, NX-5300, NX-5400, NX-5700, NX-5800, NX-5900. OTAP Manager Software. | 08/08/2017 |
| KPG-1004NC | 1.70 | NEXEDGE Gen2 Network Management Client Software. | 08/31/2018 |
| KPG-D1N | 2.60 | NX-5200, NX-5300, NX-5400, NX-5700, NX-5800, NX-5900. Works with Firmware version 2.60 or later. | 09/12/2018 |
| KPG-D2N | 5.30 | NXR-5700, NXR-5800, NXR-5900, NXR-5901. Works with Firmware Version 5.30 or later. | 04/11/2018 |
| KPG-D3N | 1.40 | NX-3200, NX-3220, NX-3300, NX-3320, NX-3720, NX-3820 Works with Firmware K1.40 or later. Requires KPT-300LMC Authentication. | 09/12/2018 |
| KPG-D5 | 1.02 | NX-P500. | 07/06/2018 |
| KPT-300LMC | 1.16 | Required software package used to authenticate software (FPU) and Radio Features License Key for the NX-5000 Series Radios. | 04/19/2018 |
| PKT-23 USB Drivers | 1.01 | PKT-23K 32 and 64 bit USB Drivers. | 03/05/2014 |
Created by WA1MIK. Updated 15-Nov-18.
