GE GFW655SSVWW / GFW655SPVDS: 5.0 cu. ft. ENERGY STAR Steam Washer
Product overview and installation information for GE's front-load steam washers.
Product Overview
The GE GFW655SSVWW (White) and GFW655SPVDS (Carbon Graphite) are 5.0 cu. ft. capacity front-load steam washers designed for efficient and advanced laundry care. These ENERGY STAR certified appliances feature SmartDispense™ technology and the UltraFresh Vent System with OdorBlock™ to keep the washer fresh and clean.
Key Features and Benefits:
- UltraFresh Vent System with OdorBlock™: Eliminates excess moisture to prevent odors.
- Microban® Antimicrobial Technology: Built into components like the gasket and dispenser for lasting protection.
- SmartDispense™ Technology: Automatically dispenses the correct amount of detergent for up to 32 loads.
- Built-in WiFi: Allows remote monitoring, starting, and stopping of laundry cycles with real-time notifications.
- Dynamic Balancing Technology (dBT™): Senses and re-balances uneven loads during the spin cycle for quieter operation.
- Reversible Door: Offers flexibility for installation.
- Quick Wash Cycle: Provides a 20-minute wash for lightly soiled items.
- Sanitize + Allergen Cycle: Kills 99% of common bacteria and allergens like dust mites.
- Steam Cycles: Penetrates fabric fibers to loosen stains and enhance cleaning.
- Dryer Control™: Allows control of stacked dryers from the washer's control panel.
- More Water Option: Adds up to 3 gallons of water for bulky or heavily soiled loads.
- Shallow Depth: 32" depth fits easily into tight spaces.
- Time Saver: Cleans a full load in 37 minutes.
- My Settings: Stores preferred cycle settings for future use.
Specifications
Capacity: 5.0 cu. ft.
Electric Rating: 120V, 11.0A, 60Hz
Weight:
- Carton Weight: 255.7 lbs
- Product Weight: 245 lbs
Certifications: ENERGY STAR, ADA Compliant, UL Listed.
Dimensions and Installation
General Dimensions:
- Width: 28 inches (71.2 cm)
- Depth: 32 inches (86.4 cm)
- Height (with leveling legs retracted): 39-3/4 inches (101 cm)
- Height (with leveling legs fully extended): 40-5/8 inches (103.1 cm)
Stacked Unit Dimensions:
- Height: 55-7/8 inches (141.8 cm)
Installation Requirements:
- Includes: Power cord (up to 66"), Drain hose (up to 60").
- Stacked Installation: Requires stacking brackets (part no. GFA28KITN), sold separately.
- Alcove or Closet Installation:
- Dryer must be exhausted to the outside.
- Minimum clearances: 0 inches on all sides and top to adjacent walls or surfaces.
- Closet doors require ventilation: minimum 60 sq. in. of open area for a washer, 120 sq. in. for a washer and dryer combination.
- Bathroom or Bedroom Installation: Dryer must be exhausted outdoors. Installation must comply with local codes, National Electric Code, and National Fuel Gas Code.
- Minimum Clearances to Combustible Surfaces: 0 inches on all sides and top. A 1/2 inch clearance is suggested on each side for improved performance.
Diagram Description:
The document includes diagrams illustrating the front, side, and back views of the washer, along with dimensions. It also shows a typical stacked configuration with a dryer. The front view highlights the width (28 inches) and adjustable height (39-3/4 to 40-5/8 inches). The side view shows the depth (32 inches). Stacked dimensions indicate a combined height of 55-7/8 inches.
Available Accessories
Accessories are sold separately and include:
- Touch-up Paint (Carbon Graphite, White)
- Drain Hose Extension
- Universal Low-Profile Floors Tray (White)
- Vibration Pads
- Fill Hose
- Pedestal Accessory (White, Carbon Graphite)
- Riser (White, Carbon Graphite)
- Stacking Kit (GFA28KITN)
Warranty
- Labor: Limited 1-year entire appliance.
- Parts: Limited 1-year entire appliance, Limited 10-year motor.
Support
For product questions, visit geappliances.com or call GE Answer Center Service at 800.626.2000.