Playground FLAPPI
Installation Instructions
Model: FLAPPI
Dimensions: 226 x 372 x h277cm
Manufacturer/Brand: fungoo.eu
Model Number: 003_03435_050216
Warnings
- For home use only.
- Dedicated for external use only.
- Not suitable for children under 3 years old.
- Risk of falling down and/or hitting.
- Maximum user weight: 50 kg.
- Maximum number of users at the same time: 6.
Hardware and Fasteners
| Code | Description/Type | Quantity |
|---|---|---|
| W80 | Screw | 87 |
| W40 | Screw | 187 |
| W20 | Screw | 6 |
| T80 | Screw | 43 |
| T60 | Screw | 30 |
| S160 | Screw | 2 |
| S50 | Screw | 4 |
| S30 | Screw | 12 |
| L11 | Screw | 16 |
| P30 | Screw | 2 |
| P17 | Screw | 17 |
| P15 | Screw | 12 |
| M12 | Washer/Connector | 4 |
| M10 | Washer/Connector | 2 |
| OS1 | Washer/Connector | 41 |
| Ø3 (00239) | Drill Bit | 1 |
| Ø5.5 (01372) | Drill Bit | 1 |
| Ø10 (00188) | Drill Bit | 1 |
| PH3 (00068) | Screwdriver Bit | 1 |
| PZ2 (00241) | Screwdriver Bit | 1 |
| TX25 (00190) | Screwdriver Bit | 1 |
| TX30 (00316) | Screwdriver Bit | 1 |
| TX40 (00242) | Screwdriver Bit | 1 |
Wooden Parts List
| Part Label | Dimensions (cm) | Quantity |
|---|---|---|
| 1 | 7.0 x 7.0 x 235.0 | 4 |
| 1a | 7.0 x 7.0 x 235.0 | 2 |
| 1b | 7.0 x 7.0 x 235.0 | 2 |
| 2a | 3.2 x 5.8 x 130.0 | 2 |
| 3 | 3.2 x 5.8 x 80.0 | 5 |
| 4 | 3.2 x 5.8 x 69.0 | 1 |
| 5 | 3.2 x 5.8 x 62.8 | 3 |
| 6 | 3.2 x 5.8 x 61.0 | 2 |
| 7 | 3.2 x 5.8 x 55.0 | 2 |
| 8 | 3.2 x 5.8 x 35.0 | 1 |
| 9 | 3.2 x 5.8 x 29.6 | 1 |
| 10 | 3.2 x 5.8 x 25.0 | 1 |
| 11 | 1.6 x 9.0 x 120.0 | 1 |
| 12 | 1.6 x 9.0 x 80.0 | 43 |
| 13 | 1.6 x 9.0 x 66.0 | 1 |
| 14 | 1.6 x 9.0 x 60.0 | 6 |
| 15 | 1.6 x 9.0 x 56.0 | 2 |
| 16 | 1.6 x 9.0 x 32.6 | 1 |
| 17 | 2.7 x 3.2 x 54.2 | 2 |
Assembly Instructions
Step 1 (Page 4)
Assemble the A-frame structure. Attach ladder stringers (Part 13) to the main A-frame supports (Part 1a) using four Ø5.5 screws (x4) and FI 5.5 washers per side.
Step 2 (Page 4)
Attach the platform base (Part 14) to the main A-frame supports (Part 1a) using thirty-two Ø5.5 screws (x32) and FI 5.5 washers.
Step 3 (Page 4)
Attach the slide support (Part 4) to the main A-frame supports (Part 1a) using eight Ø5.5 screws (x8) and FI 3 washers.
Step 4 (Page 4)
Attach the slide (Part Z) to the platform base (Part 14) using four Ø10 screws (x4) and FI 10 washers.
Step 01 (Page 6)
Assemble the base frame. Connect two 7.0x7.0x175cm (Part 1) pieces to two 1.6x9.0x80cm (Part 12) pieces using four Ø5.5 screws (x4) and FI 5.5 washers per connection (total W80 x8, OS1 x8). Connect two more 1.6x9.0x80cm (Part 12) pieces to the frame using four Ø5.5 screws (x4) and FI 5.5 washers per connection (total T80 x8, OS1 x8).
Step 02 (Page 6)
Attach decking boards (Part 12) to the base frame using forty-four Ø5.5 screws (x44) and FI 5.5 washers.
Step 03 (Page 7)
Attach six vertical supports (Part 3) to the base frame using four Ø5.5 screws (x4) and FI 5.5 washers per support. Fasteners: OS1 x2, W80 x12, T80 x4.
Step 04 (Page 7)
Attach four vertical supports (Part 3) to the base frame using four Ø5.5 screws (x4) and FI 5.5 washers per support. Fasteners: OS1 x2, W80 x12, T80 x4.
Step 05 (Page 8)
Attach horizontal beams (Part 5) to the vertical supports using four Ø10 screws (x4) and FI 10 washers. Fasteners: OS1 x4, W40 x4, S50 x4, P17 x4, L11 x4.
Step 06 (Page 8)
Attach more horizontal beams (Part 5) to the vertical supports using four Ø10 screws (x4) and FI 10 washers. Fasteners: OS1 x4, W40 x4, S50 x4, P17 x4, L11 x4.
Step 07 (Page 9)
Attach roof supports (Part 12) to the vertical structure using thirty Ø5.5 screws (x30) and FI 5.5 washers. Fastener: W40 x30.
Step 08 (Page 9)
Attach upper platform beams (Part 3) to the vertical supports using ten Ø5.5 screws (x10) and FI 5.5 washers. Fasteners: OS1 x10, W80 x10, T80 x10.
Step 09 (Page 10)
Attach upper platform beams (Part 3) to the vertical supports using one Ø5.5 screw (x1) and FI 5.5 washer. Fasteners: OS1 x1, W80 x1, T80 x1.
Step 10 (Page 10)
Attach upper platform beams (Part 4) to the vertical supports using two Ø5.5 screws (x2) and FI 5.5 washers. Fasteners: OS1 x2, W40 x2, T80 x2.
Step 11 (Page 11)
Attach roof structure elements (Part 17) using four Ø5.5 screws (x4) and FI 5.5 washers.
Step 12 (Page 11)
Attach roof structure elements (Part 14) using twenty Ø5.5 screws (x20) and FI 5.5 washers. Fastener: W40 x20.
Step 13 (Page 12)
Attach ladder stringers (Part 13) to the tower structure using nine Ø5.5 screws (x9) and FI 5.5 washers.
Step 14 (Page 12)
Attach base support elements (Part 2a) to the main frame using eight Ø3 screws (x8) and FI 3 washers. Attach Swing Rope/Chain (SD) x4.
Step 15 (Page 13)
Attach ladder rungs (Part 15) to the ladder stringers using two Ø5.5 screws (x2) and FI 5.5 washers.
Step 16 (Page 13)
Attach roof beams (Part 5 and Part 6) using Ø5.5 screws (x2 and x4 respectively) and FI 5.5 washers. Fasteners: W40 x8, W80 x4.
Step 17 (Page 14)
Attach roof panels (Part 12) to the roof structure using fifty-six Ø5.5 screws (x56) and FI 5.5 washers. Fastener: W40 x56.
Step 18 (Page 14)
Assemble the tower structure. Attach vertical supports and horizontal beams using four Ø5.5 screws (x4) and FI 5.5 washers. Fasteners: OS1 x4, W80 x4, T80 x4.
Step 11 (Page 15)
Attach swing beam (Part 11) to the A-frame using four Ø5.5 screws (x4) and FI 5.5 washers. Fasteners: OS1 x4, W80 x8, T80 x4.
Step 1a (Page 15)
Attach swing beam (Part 1a) to the A-frame using four Ø5.5 screws (x4) and FI 5.5 washers. Fasteners: OS1 x4, W80 x8, T80 x4.
Step 16 (Page 15)
Attach swing beam (Part 16) to the A-frame using four Ø5.5 screws (x4) and FI 5.5 washers. Fasteners: OS1 x4, W80 x8, T80 x4.
Step 1b (Page 15)
Attach swing beam (Part 1b) to the A-frame using two Ø5.5 screws (x2) and FI 5.5 washers. Fasteners: OS1 x2, W80 x8, T80 x2.
Step 21 (Page 16)
Attach tower elements. Use four Ø5.5 screws (x4) and FI 5.5 washers. Also use two Ø10 screws (x2) and FI 10 washers. Components: M10 x2, P30 x2, S160 x2, T60 x4.
Step 22 (Page 16)
Attach tower elements. Use twelve Ø10 screws (x12) and FI 10 washers. Components: S30 x12, P15 x12, L11 x12.
Step 23 (Page 17)
Attach tower elements. Use twelve Ø5.5 screws (x12) and FI 5.5 washers. Components: UC x6, T60 x12.
Step 24 (Page 17)
Attach the slide (Part Z) to the tower structure using two W20 screws (x2) and two W40 screws (x2).
Step 25 (Page 18)
Attach swings (Part SW) to the swing beam using ZA (Swing Connector) x4 and SE (Swing Hanger) x2.
Step 26 (Page 18)
Diagram shows a detailed view of a rope knot used for swing attachment.
Step 27 (Page 19)
Attach tower elements. Use twelve Ø5.5 screws (x12) and FI 5.5 washers. Components: MG x6, P17 x12, T60 x12.
Step 28 (Page 19)
Attach the slide (Part PLT) to the tower structure using four W20 screws (x4).