LED Constellation Lights

Product Overview

Thank you for purchasing the LED LIGHTS. This manual provides more information about this product. Please read the instructions carefully before using.

Product Name: LED Constellation Lights

Product Description: Let the bright lights illuminate your life.

Product Dimensions:

• Main Unit: 4.72 inches
• Accessory 1: 2.75 inches
• Accessory 2: 3.54 inches

Product Length (Cables): 253.5 inches

Included Accessories:

• LED constellation lights
• Power Supply
• Cable Buckle
• Instructions

Installation Indication

Follow these steps for installation:

1. Remove the surface protective film before use.
2. Check the distance between power cables.
3. Mark the shape of the design pasted in advance.
4. Tear off the glue-backed centrifugal paper.
5. Connect the power supply to use.

Constellation Placement Reference:

Diagrams showing placement for various constellations: Aquarius, Pisces, Leo, Virgo, Aries, Taurus, Libra, Scorpio, Gemini, Cancer, Sagittarius, Capricorn.

Mode Regulation

• On/Off
• Music mode (lights follow the music)

APP Download and Control

Use any of the below methods to connect LED LIGHTS to the App:

Method 1: Scan QR code to download APP.

Method 2: Search "LotusLamp X" in the Apple App Store or Google Play Store.

Compatibility: iOS & Android

Pairing Instructions:

1. Connect the lamp to the power supply.
2. Keep the phone within 32.8 feet of the light strip.
3. Turn on Bluetooth.
4. Click APP to add device connection.

App Interface Introduction:

• Pairing: Follow on-screen prompts to enable Bluetooth if prompted.
• Lamp List: View connected lamps.
• RGB Value Setting: Adjust color palette and brightness.
• Dynamic Mode: Select various lighting effects.
• Musical Pattern: Lights synchronize with music.
• Scene Mode: Choose pre-set lighting scenes.
• Timing Mode: Set schedules for the lights.
• Frequently used colors: Quick access to favorite colors.
• On/Off: Control the lights directly from the app.

Device Information: Modification of factory settings is not recommended as it may alter LED light usage.

System Requirements:

• For Apple devices: iOS 8.0 or above.
• For Android devices: Android 6.0 or above.

Trademarks: iPod, iPhone, iPad, App Store are trademarks of Apple Inc. Android, Google Play, and the Google Play logo are trademarks of Google, Inc.

Important Safety Information

WARNING: THIS PRODUCT CONTAINS A BUTTON BATTERY

If swallowed, a lithium button battery can cause severe or fatal injuries within 2 hours. Keep batteries out of reach of children. If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.

Battery Installation for Remote Control:

The remote control uses a button cell battery (CR2025). Pull out the PVC film from the battery door before use.

To replace/install a new battery:

1. Open the battery door by pushing with a pin and then pushing the indicated points.
2. Insert one button cell battery (CR2025) in the correct direction.
3. Close the battery door.

If the remote control is not operating properly, the battery may need replacement.

Disposal Information

Dispose of packaging materials and the product in an environmentally-friendly manner. Do not dispose of the product with household garbage. Utilize designated recycling centers for old electrical and electronic equipment.

Batteries and rechargeable batteries must be removed and disposed of separately. Do not dispose of batteries with normal household waste; use appropriate collection points.

Manufacturer and Support

Manufacturer: SOUTHLED SEMICONDUCTOR LIGHTING (SHENZHEN) CO.,LTD.

Address: No.8, Tangkeng Road, Building 3, Third Floor, Tangkeng Community, Guangtian Sub-district, Shiyan Town, Bao'an District Shenzhen City.

Warranty: 12-Month Limited Warranty

Support: Lifetime Technical Support

Email: sorin@southled.com

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.

Connect and Share

LET'S CONNECT

Inspire & Be inspired. Share your creations on social media. Discover new Ideas for using your products.

Look forward to your purchase again!