Bosch GTA 600 Professional Saw Stand

Safety Instructions

General Safety Instructions

Read all warnings and instructions provided with the saw stand or power tool. Failure to follow safety and general instructions may lead to electric shock, fire, or serious injury.

Safety Instructions for Saw Stands

• Disconnect power or remove battery before making adjustments or changing accessories. Accidental starting of power tools can cause accidents.
• Assemble the saw stand correctly before mounting the power tool. Proper assembly is crucial to prevent collapse.
• Secure the power tool firmly to the saw stand before use. Loss of control may occur if the tool slips.
• Place the saw stand on a firm, flat, horizontal surface. If the stand might slip or wobble, safe and steady workpiece machining cannot be guaranteed.
• Do not overload the saw stand or use it as a step or ladder. Overloading or standing on the stand can shift its center of gravity, causing it to tip.
• Do not force the workpiece into the saw blade. Excessive pressure can cause the saw stand to tip over.
• Ensure all screws and connecting pieces are tightly fastened during work. Loose connections can lead to instability and inaccurate sawing.
• Ensure long and heavy workpieces do not unbalance the saw stand. Support the free end of long and heavy workpieces.
• When folding or unfolding the saw stand, keep fingers away from articulation points to prevent crushing.

Symbols

The following symbols provide important information for using your saw stand. Please note their meaning for effective and safe operation.

Symbol and meaning: The maximum load bearing capacity (power tool + workpiece) of the saw stand is 60 kg.

Product Description and Specifications

Intended Use

The saw stand is designed to hold Bosch benchtop saws (e.g., GTS 10 J). It is intended for cutting boards and profiles.

Product Features

• (1) Swing latch
• (2) Clip
• (3) Base frame
• (4) Saw stand leg
• (5) Fastening set
• (6) Housing frame of the power tool
• (7) Fixing clip on the power tool

Technical Data

Values may vary depending on the product, application, and environmental conditions. For more information, visit www.bosch-professional.com/wac.

Assembly

Items Included

Before assembly, verify that all listed parts are supplied:

• Base frame (3)
• Saw stand legs (4) (4 pieces)
• Fastening set (5) comprising: 4x Cross-head screws M8 x 45, 4x M8 lock nuts

Extra Tools Required (Not Included)

• Cross-headed screwdriver
• Open-end spanner (13 mm)

Assembling the Saw Stand (See Figures A1-A2)

Diagram Description (A1): Shows the base frame being unfolded. The swing latch (1) is opened, and the base frame (3) is extended. Arrows indicate the movement.

Diagram Description (A2): Illustrates attaching the saw stand legs (4) to the base frame (3) using the fastening set (5). The legs are inserted into the square pipes of the base frame until the assembly holes align. Ensure legs point outwards.

Securing the Power Tool (See Figures B1-B3)

Diagram Description (B1): Depicts folding up the clips (2).

Diagram Description (B2): Shows the rear housing frame (6) of the power tool being pushed fully under the clips (2).

Diagram Description (B3): Illustrates centering the power tool on the base frame (3). The swing latch (1) bracket is hooked over the fixing clip (7), and the latch lever is folded down to secure the tool.

Operation

Working Advice

Always hold the workpiece firmly, especially long or heavy pieces. Be mindful that the center of gravity may shift after cutting, potentially causing the stand to tip. Do not overload the saw stand; always adhere to its maximum load capacity.

Transport (See Figures C1-C3)

Important: The power tool must not be mounted on the saw stand when folding or unfolding it.

To fold the saw stand for transport:

• Remove the power tool.
• Fold down both clips (2).
• Fold up the saw stand.
• Hook the swing latch (1) bracket over the other side of the base frame (3) and push down the lever to secure the stand.

Maintenance and Service

After-Sales Service and Application Service

Bosch after-sales service is available to answer questions regarding product maintenance, repair, and spare parts. Exploded views and spare parts information can be found at www.bosch-pt.com. The Bosch product advice team is ready to assist with any product or accessory inquiries.

When contacting service or ordering spare parts, always provide the 10-digit article number found on the product's rating plate.

Disposal

Saw stands, accessories, and packaging should be disposed of responsibly through recycling.