Certificate of Conformity

Issued To / License Holder

Company: Ningbo Deye Inverter Technology CO., LTD.

Address: No.26-30, South Yongjiang Road, Daqi, Beilun Area, 315806, Ningbo, Zhejiang China

Factory Location

Company: Ningbo Deye Inverter Technology CO., LTD.

Address: No.26-30, South Yongjiang Road, Daqi, Beilun Area, 315806, Ningbo, Zhejiang China

Product Certification Details

Type of Product: Grid-Connected PV Inverter

Models: SUN-110K-G03, SUN-100K-G03, SUN-90K-G03, SUN-80K-G03, SUN-75K-G03, SUN-70K-G03

Technical Data:

• Nominal Power: See page 3
• Nominal Voltage: 230 / 400 Vac
• Frequency: 50 Hz
• Firmware Version: LCD: Ver0175, Control board: Ver3205
• Number of phases: Three Phase
• Isolation transformer: No
• Control device: Internal

Compliance

In compliance with standard: UNE 217001:2020-10 "Tests for systems to prevent energy injection into the distribution grid"

In compliance with regulation requirements: Annex I of ITC-BT-40 "Systems to prevent energy injection into the grid", Low Voltage Electrotechnical Regulation and ITC. Edition updated on August 9, 2021.

Certification Information

The equipment is certified according to SGS internal procedure PE.T-ECPE-51, in accordance with the requirements of standard UNE-EN ISO/IEC 17065.

This certificate contains the following information:

• Technical information of power generators.
• Technical information on power analyzers.
• Scheme covering the elements and the installation to limit power injection and the used type of communication.
• Maximum number of generators to be connected in parallel.

Certificate First Issued: August 22, 2022

Certificate Valid Until: August 22, 2027

Issued in: Madrid, August 22, 2022

Certification Manager: Daniel Arranz Muñiz

Installation Components: Energy Meter

Component Type: ENERGY METER

Brand: EASTRON

Model: SDM630MCT

Manufacturer: Zhejiang Eastron Electronic Co., Ltd.

Characteristics:

• Input voltage: 173 to 480 Vac
• Frequency range: 45 to 65 Hz
• Pulse output: 3200 imp/kWh
• Power accuracy: 1%
• Firmware version: V2.4

Installation Scheme Description

The installation scheme illustrates the connection of a Solar Panel array to an Inverter. The Inverter features VCC_5V, GND, and RS485 communication ports. The RS485 communication is utilized to connect to an Eastron Energy Meter (Model SDM630MCT). The Energy Meter is depicted with connections to an AC Breaker, a Family Load, and the Grid. Specific wiring points shown include L1, L2, L3, N, and GND, indicating a three-phase connection.

Parallel Connection Information

Maximum number of inverters to be connected in parallel: Not applicable.

Note: As specified by the manufacturer, each inverter must be connected to a power analyzer. Inverters are not allowed to work in parallel without a power analyzer.

Full Product List and Nominal Characteristics